Availability
Showing In Stock Items. Show All 24 Items.
Rugged Ridge XHD high-mount snorkel extensions enable you to take the plunge without your budget taking a dive! They allow the air intake to reach an additional 21 in. to the top of your windshield, eliminating the risk of hydro-locking your engine. XHD snorkel extensions are made from rugged and durable plastics, and they are engineered to allow the windshield to fold and doors to be removed. Plus, they can be used with Rugged's dual battery tray, windshield light bar, and windshield light mounting tabs, because what good is having a snorkel to cross the river, if you must leave your lights and power for your winch on the other side?
Not Yet Reviewed
$167.99
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow, S&B oiled cotton filters are built with four layers (or eight for diesels) of the highest-quality cotton gauze. They use deeper, wider pleats with more per filter. Plus, their manufacturing process yields almost no "bleed", creating a greater open surface area. All of this adds up to more airflow with excellent protection. The filter elements are washable, reusable, and will protect your engine from harmful dirt and debris. Gain performance and a sporty, high-tech appearance under the hood of your rig with an assist from the S&B Filters cotton filter cold air intake kit best suited for your application. More product features, items, and specifications include: * Silicone rubber (not urethane) filters and couplers help ensure they won't degrade or crack, while resisting temperatures as high as 400 degrees F * Helps balance air/fuel ratios to improve gas mileage * Cross-linked intake tube minimizes restriction * Custom air box (where applicable, including some with clear lids) keeps loose dirt and turbulent underhood air out of your intake * Specific year, make, and model design makes them simple to install, with help from the easy-to-use installation instructions and illustrations * Included mounting hardware for replacing your stock assembly in 30 minutes or less in most cases
( 437 )
$188.82
On Sale
Holley throttle body intake elbows feature a dual throttle body bolt pattern, and fit any intake manifold with 4150 or Dominator mounting flange. They also have a 105mm throttle body opening and a 100 degree mounting angle with slotted mounting holes. Constructed from cast aluminum, they include a MAP sensor port cover, gaskets, and hardware.
( 13 )
$218.95
—
$279.95
$197.05
—
$251.95
On Sale
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 767 )
$262.99
$212.99
—
$249.99
Build power by reducing air restriction and turbulence with SLP Performance LS1 air box lids. These composite lids feature a wedge-shaped design to increase and smooth out airflow as it enters your engine. They come with a steel clamp for easy hookup, and they mount in place of your stock lid.
( 67 )
$139.99
Steeda cold air intake kits will deliver more clean airflow to your engine. These replacement/upgrade units are manufactured from quality materials to ensure performance and durability. An easy-bolt on part for the garage mechanic, Steeda intakes are supplied with an air box, filter, and tube (where applicable). They mount in the factory location with the supplied rubber trim to seal them against the hood and fender and keep the hot air out. All necessary hardware and easy-to-follow instructions are included. Order the model designed for your specific vehicle.
( 13 )
$219.95
—
$329.95
On Sale
Flowmaster Delta Force cold air intakes are the elite kits you can call upon to help attain maximum performance and efficiency for your vehicle. All systems feature ultra-trick looking durable cross-linked polyethylene intake tubes with a large high-flow conical shaped air filter ensuring it will trap more dirt/dust particles than the typical filter. They are highlighted with Flowmaster logos to show others you're serious about quality and performance. Installation is easy utilizing factory mounting points. Take "operation cool airflow" to the next level with the addition of Delta Force cold air intake kits. Flowmaster Delta Force cold air intakes feature: * Roto-molded cross-linked polyethylene (XLPE) high-flow intake tube * Custom-designed black powdercoated air dam with foam rubber seal * Reusable/cleanable air filter * Multi-layer reinforced silicone couplers * Anodized aluminum fittings * Stainless steel hardware * No tuning required
( 8 )
$449.95
—
$499.95
$247.95
—
$274.95
Clearance
Don't let your stock air box hold your vehicle's performance back. The experts at Trick Flow® have engineered TFX™ cold air intake kits to meet the intake airflow demands of your fuel injected ride. The kits replace your restrictive air cleaner with a low-restriction reusable filter, a tuned molded black plenum (where applicable), mounting hardware, and instructions. They are manufactured by K&N for Trick Flow®.
( 113 )
$224.99
$199.50
—
$289.99
On Sale
APR open intake systems are the maximum flowing, low-cost options for nearly any setup! They feature a straight through filter design with minimal twists and bends for maximum flow and minimal pressure drop. They are equipped with APR's proprietary washable and reusable cotton gauze high-flow filter that flows 22 percent more than stock at various depressions, registers less pressure drop at each depression, has 20 percent more surface area compared to stock, and uses a filter substrate material proven on other APR intake systems to provide the necessary filtration to last a lifetime. Features and benefits: * 5 in. (127mm) filter transition is 260 percent larger than stock * Filter outlet stack increases air velocity to maximize flow * Less strain on factory components compared to stock * Better throttle and turbo response compared to stock * Airbox design captures fresh air from frontal inlet, reducing suction from engine bay and radiator, keeping system constantly fed with cool incoming air * Heatshield and inlet pipe are made from a glass filled polypropylene material that acts as an excellent heat deflection barrier to minimize inlet temperatures compared to no shield * Enhanced engine and turbocharger sounds * Easy install—simply pops into place on the factory mounting pegs * Supports both MAF and non-MAF engines
( 1 )
$274.95
$247.45
On Sale
K&N off-road cold air intake kits can be used on a variety of off-road applications, from side-by-sides to full race trucks. Features include: * Cylindrical canister housing for rugged protection, which allows excellent airflow in harsh off-roading environments * 6-ply of cotton gauze filter media for outstanding protection * Washable and reusable air filter * Foam wrap pre-filter extends service life of K&N air filter * Two velocity stack adapters (3.5 in. and 4 in.) to make fitment on your application easy * Hardware for mounting
( 3 )
$314.99
$264.99
On Sale
Injen Evolution Series cold air intake kits will deliver impressive fuel economy, horsepower, and torque gains. They incorporate either a massive SuperNano-Web dry air filter or 8-layer oiled cotton gauze air filter--both fully serviceable--to keep clean air moving. These intakes feature sleek design lines for unmatched looks under your hood—and they drop into the original mounting points for a direct fit replacement. These systems come ready to install, complete with stainless steel hardware and automotive-grade hose couplers. Order the model designed for your vehicle application. Features: * Durable roto-molded polyethylene construction * Stainless steel band clamps with inner protective liner * Reinforced automotive-grade silicone couplers
( 18 )
$335.95
$268.76
On Sale
The aFe Magnum Force Stage 1 Pro 5R air intake systems are powerful units capable of outflowing your factory intake by up to 150 percent. They feature a highly engineered heat-shielded air box with a welded-on adapter for direct fitment to your stock intake tract—and an air filter with five layers of progressively finer mesh cotton gauze media for ultimate filtration. These performance intakes provide a hassle-free installation utilizing factory mounting locations. Dozens of models are available for fitment on specific vehicle applications.
( 3 )
$268.00
$241.20
Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)
( 8 )
$209.95
Using the highest quality components available, Trick Flow® TFX™ high-flow air intake kits put the show and go in late model vehicles. A washable cotton gauze filter and polished aluminum inlet tub adds sparkle under the hood and increase acceleration. A heat shield isolates cooler air from the engine heat (in most applications) and new mounting hardware and instructions help make installation easy. They're manufactured by K&N for Trick Flow®.
Not Yet Reviewed
$259.99
—
$290.99
On Sale
aFe Takeda Stage 2 Pro Dry S short ram air intake systems are designed to look as good as they perform. The short ram intake is perfect for areas with inclement weather, by moving the filter up you are less likely to collect debris or suck water into the filter. The Pro Dry S filter provides 360-degree radial flow to maximize air flow and is easy to clean with simple soap and water, no need for oil. Best of all each aFe Takeda Stage 2 Pro Dry S short ram air intake is a direct fit, utilizing factory mounting points for and easy, clean installation.
( 5 )
$297.00
$267.30
On Sale
Injen Technology introduces their turbo inlet pipe for Volkswagen and Audi vehicles equipped with the Gen 3 1.8L / 2.0L turbo engines and the Volkswagen MK7 and Audi 8V applications. The wide array of vehicle fitments is impressive for this one part, so please check and confirm fitment before ordering. SES inlet pipes have a larger internal diameter to give your turbo free access to as much air as it can ever need. They're also designed with smooth airways to minimize turbulence and keep drag from fighting against your turbo's compressor. This simple change alone also increased the sound output of the turbo, giving you both tangible and audible performance gains. Injen has integrated the PCV inlet as well as the mounting arm into the unibody cast aluminum housing. From the 2-ply automotive grade silicon couplers to the stainless steel band clamps with an inner protective liner, all included hardware is designed to resist heat, pressure, fuel, and oil for years of service. Additional features: * Dyno proven gains of up to 14 hp and 11 lbs.-ft. of torque * Cast aluminum housing offers far superior durability over OEM plastic component * Provides faster turbo spool, increased responsiveness, and greater turbo sound output * Precision CNC-machined fittings for a superior seal and simple installation * Fully integrated CNC-machined PCV inlet provides an OE fitment and seal * 3 in. inlet OD minimizes turbulence and allows the maximum amount of air to reach the turbo * Note: Will only work with 3.00 in. tubing * 3 in. reinforced silicon automotive-grade coupler included for increased longevity * Fully integrated mounting bracket minimizes the chance of mounting hardware loosening over time * Fits directly in place of the OEM component, maximizing compatibility with other OEM and aftermarket components * Simple installation, no cutting or drilling required
Not Yet Reviewed
$146.54
$117.23
APR turbo inlet pipe conversions include a full back tube and turbo inlet adapter to convert the GTI/A3 style system to one designed for the Continental turbocharger. The tubes feature a larger turbo inlet pipe at the turbo end, and a DV recirculation port for the throttle mounted diverter valve. These APR pipes can be used when upgrading to the Continental turbo, other hybrid, or direct replacement turbocharger systems that require a larger turbo inlet and a DV recirculation on the hose.
Not Yet Reviewed
$109.95
On Sale
Injen SP Series Speed Pro Short Ram intake systems are designed for enthusiasts who demand the very best! These intakes reach down below your front bumper for colder, denser, fresher air—causing stronger, more efficient combustion. They're more than just a cold air conduit; the Speed Pro is a high-tech, fine-tuned oxygen delivery system. The intakes are perfectly designed to fit inside your exact year, make, and model with their TIG-welded brackets and high-quality aluminum tubing, making for a longer lifespan. Injen SP Series systems have unique rubber vibra-mounts, stainless steel clamps, and silicone hoses for a secure, hassle-free installation. Enjoy more horsepower and better acceleration with the value-packed intake fitted for your application.
( 9 )
$289.92
—
$339.14
$231.94
—
$271.31
Are you looking to improve your bike engine's breathing capability by installing an open element air filter? Look no further than HardDrive Coriolis high performance air cleaners. They feature a cast aluminum housing available in black or chrome finish, along with high-flow air filters and 90 degree manifolds. When you increase efficiency, power and economy also improve. Coriolis high performance air cleaners are available for a wide range of Harley-Davidson® motorcycles with the appropriate required adapter.
( 1 )
$183.56
On Sale
Spectre muscle car cold air intake kits deliver the power-increasing technology that race cars and modern cars have employed for some time. A company rooted in racing with a definite bias toward early muscle cars and speed, Spectre has designed simple, universal cold air intake systems for your specific ride. Available for many applications, these intake kits let you choose the location to draw the cold air from—the wheel wells, cowls, front gravel shields, or even the high-beams—with the optional headlight scoops. The more cold air you take in, the more power you make. Spectre cold air intake kits help to reduce the incoming air temperature by introducing fresh cold air to the engine for incredible power gains; and since your engine won't need to work as hard, there's the added benefit of improved gas mileage. Order the model designed for your muscle car application.
( 32 )
$249.99
$224.99
On Sale
Spectre Performance cold air intake kits provide better acceleration and fuel economy for your truck or SUV. They're designed to replace your factory air filter and air box assembly, eliminating the restriction as they smooth and straighten airflow. The high-flow design of these intakes enables your engine to breathe in a larger volume of air, resulting in more usable power throughout the engine's entire rpm range. Hundreds of models are available, with various tube and filter options. Choose the kit tailored for fitment and performance on your make/model application.
( 834 )
$199.99
$174.99
Volant RAM Cool Air Scoops were designed to help you increase the effectiveness of your Volant cold air intake system. Not only will you gain fuel economy, but you'll gain dyno-proven horsepower and torque increases as well. These scoops will fit without any modification and are formed to match each vehicle to attach to a high air pressure point behind the bumper. This will bring you the coldest air possible. They are made from the same high-quality, heavy-duty polyurethane as the rest of your air intake system for long-lasting dependability and performance. So, if you're looking for a way to improve the performance of your cold air system, these non-heat conducting, perfect-fit Volant RAM Cool Air Scoops are your answer!
( 6 )
$178.90
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
