Availability
Showing In Stock Items. Show All 31 Items.
On Sale
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$603.99
$553.99
On Sale
Built for power and show, K&N 69 Series Typhoon cold air intake kits are engineered to dramatically reduce intake restriction, resulting in additional horsepower and torque. These air intake kits primarily feature a free-flowing, mandrel-bent aluminum tube induction system designed to fit many performance vehicles. The Typhoon kits come in one of three designs: cold air intakes, short ram intakes, or complete cold air intakes—which can be configured as either cold air or short ram intakes. Some air intake models feature high-quality tube and end cap finish options, including polished aluminum, and black, blue, red, or silver powdercoated, among other options. Order the K&N 69 Series Typhoon cold air intake kit that is suited to fit your vehicle application.
( 462 )
$839.99
$789.99
On Sale
Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)
( 8 )
$574.95
$517.99
—
$719.95
On Sale
Borne Off-Road snorkel air intakes move the fresh air inlet over 20 in. above the stock location, allowing the engine to pull in cleaner air. The precision rotational molded tube is made from durable, UV-resistant cross-linked polyethylene that can withstand the heat of the sun and any debris the trail can throw at it. The top of the snorkels include a 6 in. inlet with a steel mesh cover to protect the intake from large debris, and the inlet can also be swapped for a pre-filter to help keep your main intake filter clean.
Not Yet Reviewed
$596.95
—
$773.95
$537.26
—
$696.56
On Sale
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 65 )
$573.00
—
$780.00
$515.70
—
$702.00
Designed to be run with your Edelbrock E-Force Competition supercharger, these E-Force air intake systems can add additional horsepower to your vehicle--and who doesn't want more power? E-Force Competition air intake systems feature an open element style cold air system with an integral mass air meter, a cone-style air filter that can be cleaned, oiled, and reused, and a large molded plastic heat shield to block high temperatures and permit a rush of cool air into your supercharger! Kits are available for a variety of applications from 2005 and up.
( 1 )
$509.95
—
$676.95
On Sale
Scott Drake offers reproductions of the extremely rare 1967-68 Early Mustang 390 GT High Performance air cleaners. These concours-correct models are available with or without the Emissions Control Tube, and they include a blue base and chrome lid. The air cleaners are an excellent stock-appearing performance upgrade for the very restrictive 1968-70 390-428 air cleaners. Some early production 1968 390 GTs may have come from the factory with this air cleaner.
Not Yet Reviewed
$525.95
On Sale
aFe Magnum Force Stage 2 Super Raptor Pro 5R air intake systems offer double the looks and performance to achieve maximum power gains, along with a perfect fit—and installation is a breeze! The dual air filters ensure your engine is taking in the cleanest, coldest air possible. Upgrade your turbocharged ride with a Magnum Force Stage 2 Super Raptor Pro 5R air intake systems from Advanced Flow Engineering. Features include: * Aluminum cover finishes the intake, adding style to your engine bay * Dual 3 1/2 in. mandrel-bent, brushed aluminum intake tubes with H-pipe delivers balanced intake tube pressures and maximizes airflow and velocity * One-piece aluminum heat shield utilizes stock mounting locations * 1,000 cfm rating at 7 in. H2O * Outflows factory intake by up to 92 percent * Two Pro 5R air filters with pre-filters—oiled 5-layer progressively finer mesh cotton gauze with 100 percent polyurethane frame allows maximum performance and filtration * No cutting or drilling on factory parts * Clamps, couplings, and hardware are included
( 4 )
$808.00
—
$896.00
$727.20
—
$806.40
On Sale
aFe Rapid Induction Pro 5R air intake systems feature simple styling that achieves maximum power gains, maintains a perfect fit, and makes installation a snap. The massive air filter ensures your engine is breathing the cleanest, coldest air possible—and that equates to additional power. Upgrade your ride with an aFe Rapid Induction Pro 5R air intake system. Features include: * 18-gauge steel wrinkle black powdercoated heat shield snaps onto the lower half of factory air box * Custom high-temperature reinforced silicone elbow coupling is included for easy install * Pro 5R air filter— 5-layer progressively finer mesh cotton gauze with 100 percent polyurethane frame allows maximum performance and filtration * No cutting or drilling on factory parts for hassle-free install
( 2 )
$836.00
$752.40
On Sale
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 67 )
$573.00
$515.70
On Sale
Flowmaster Delta Force cold air intakes are the elite kits you can call upon to help attain maximum performance and efficiency for your vehicle. All systems feature ultra-trick looking durable cross-linked polyethylene intake tubes with a large high-flow conical shaped air filter ensuring it will trap more dirt/dust particles than the typical filter. They are highlighted with Flowmaster logos to show others you're serious about quality and performance. Installation is easy utilizing factory mounting points. Take "operation cool airflow" to the next level with the addition of Delta Force cold air intake kits. Flowmaster Delta Force cold air intakes feature: * Roto-molded cross-linked polyethylene (XLPE) high-flow intake tube * Custom-designed black powdercoated air dam with foam rubber seal * Reusable/cleanable air filter * Multi-layer reinforced silicone couplers * Anodized aluminum fittings * Stainless steel hardware * No tuning required
( 8 )
$518.95
—
$531.95
Eliminate your restrictive factory air box, filter, and intake tube. In their place, install one of the Volant MaxFlow 5 closed box air intake kits. They house a MaxFlow 5 oiled cotton gauze air filter that is cleanable and reusable. As an enclosed system, the air intake keeps your engine quiet at cruising speeds, but still allows it to roar to life when you stomp on the gas. This design protects the filter and ensures that colder air is pulled in from the fender instead of the engine bay—resulting in more horsepower and torque. These intake units are factory-tuned, and everything you need for installation is included. Volant MaxFlow 5 air intake kits are available for fitment on a variety of makes and models.
( 171 )
$503.90
Volant PowerCore air intakes feature a heat-resistant air box that's designed to keep hot engine compartment air out of your air intake stream, pulling cold air from down below. This gives you a cold, dense air charge that delivers maximum punch and power potential. These PowerCore intakes also include an air filter that's specifically designed to stop ultra-fine particles from harming your engine. Order the model designed for your vehicle application. Other features and benefits: * Increased horsepower and fuel economy * PowerCore air filter material can even get wet without harm * Maintenance-free; never needs cleaned or oiled * Aluminum air box lid adds style to your engine compartment
( 170 )
$570.90
K&N elevated intake snorkel kits are built to deliver added protection and confidence when heading off-road and into extreme environments. These systems help ensure a consistent supply of cleaner air to your engine, especially in dusty, sandy, or debris-heavy conditions. By relocating the air inlet to the vehicle's highest point, K&N snorkels help preserve airflow, enhance induction tone, and reduce the risk of water ingestion (not rated for complete water submersion). The one-piece, roto-molded construction offers a durable, integrated appearance and is designed to fit either the factory, K&N, or Airaid cold air intake system (see vehicle-specific fitment details). K&N snorkels are engineered to enhance your vehicle's off-road capability and performance without compromising style. * Helps prevent ingestion of dirt, debris, water * Maintains a clean but rugged OEM-style appearance * Trail-ready installation in approximately 3 hours * Order the kit recommended for your vehicle
Not Yet Reviewed
$619.99
On Sale
Enjoy a custom look under the hood without compromising performance and quality with an aFe Momentum XP Pro 5R Cold Air Intake System. It features a unique one-piece sealed housing and a brushed aluminum intake tube, resulting in dyno-proven power gains. These intake systems are designed around the largest washable filter possible to allow maximum performance and filtration. Their unique filter-to-housing interface not only makes for a simple installation, but also allows for a large inverted air filter. Momentum XP Pros are available in a variety of configurations for fitment on different vehicles.
Not Yet Reviewed
$593.00
—
$704.00
$533.70
—
$633.60
Corsa carbon fiber MaxFlow 5 air intakes blend aesthetics and engineering to deliver in a single package. The intakes efficiently direct airflow from the filter to the throttle body. Streamlining the airflow eliminates any calibration concerns, and helps increase throttle response. Features include: * 100 percent carbon fiber construction * Outflows stock intake creating more horsepower and torque * MaxFlow 5 oiled cotton gauze filter
Not Yet Reviewed
$675.99
Roush 2015-17 Mustang 3.7L V6 Level 1 Performance Pacs are one of the easiest and most economical ways to achieve a power boost! These kits have been dyno-tested to add more than 12 hp and 13 lbs.-ft. of torque to your rear wheels. The industry-leading cold air intakes are designed to maximize the space in your engine bay. They're injection-molded units equipped with a high-flow, multi-layer filter—and the lower restriction rate means you'll never have to upgrade your intake. Level 1 Performance Pacs include calibrations engineered for aggressive throttle mapping, a sportier feel, and driving enhancements across the power band. These calibrations can be quickly programmed into your factory ECU using standard J2534 reflash interfaces and the accompanying Roush Diagnostic Tool utility. * An optional 3-year/36,000-mile Limited Powertrain Warranty is available.
Not Yet Reviewed
$760.99
No more changing out your air filter daily, weekly or even monthly, when driving in extreme dusty conditions. By ejecting the dust in the air before it reaches the filter, the S&B Filters Particle Separator allows your air filter to last longer. As you drive, the dusty air enters the fixed vortex tubes that spins the air around and pushes the heavier dust to the outer walls. The S&B Filters Particle Separator replaces the entire stock intake box, tube & air filter. Most installs can be completed in less than 2 hours with no drilling required. It uses the stock filter minder, so you can quickly and accurately determine when your filter needs to be serviced. The quick access latches allow the air filter to be changed in less than 60 seconds without needing any tools.
Not Yet Reviewed
$699.00
On Sale
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
( 25 )
$593.00
$533.70
On Sale
aFe Momentum XP Alpha Raptor Pro 5R air intake systems dominate with performance, style, and ease of installation. aFe Momentum XP Alpha Raptor Pro 5R systems feature: * Outflows factory intakes by 28 percent * CAD-designed roto-molded housing * One-piece sealed housing * Built-in sight window provides easy inspection of filter without disassembly * Unique (patent-pending) filter-to-housing interface for easy installation * Dual inlet Pro 5R 5-layer pre-oiled progressive finer mesh cotton media for maximum performance, filtration, and convenience * 3 in. mandrel-bent equal length design intake tubes for balanced intake tube pressures and maximize airflow and velocity * Tubes are offered in wrinkle black powdercoat, blue powdercoat, or brushed aluminum finishes * No cutting or drilling on factory parts for faster installation * All clamps, couplings, and hardware are included * Direct bolt-on systems
Not Yet Reviewed
$593.00
$533.70
On Sale
aFe Track Series carbon fiber Pro Dry S air intake systems are open-element designs displaying massive air filters and carbon fiber intake tubes. Laid out to fit each specific make and model available, the systems outflow factory intakes, deliver a more aggressive sound, and add plenty of style for under your hood. aFe Track Series carbon fiber systems may feature: * Lightweight high-gloss, clearcoated 100 percent twill weave carbon fiber tubes * Large oil-free Pro Dry S 3-layer washable/reusable high performance air filter * Stainless steel clamps, silicone couplers, and hardware * Housings made from XLPE (cross-linked polyethylene) polymer minimize warm engine air for maximum performance * Aluminum heat shields are one-piece, lightweight, and powdercoated black—block performance-robbing engine heat * Unique (patent-pending) filter-to-housing interface using fewer parts than traditional systems for a hassle-free installation
( 2 )
$819.00
—
$877.80
$737.10
—
$790.02
On Sale
aFe Track Series carbon fiber Pro 5R air intake systems are open-element designs displaying massive air filters and carbon fiber intake tubes. Laid out to fit each specific make and model available, the systems outflow factory intakes, deliver a more aggressive sound, and add plenty of style for under your hood. aFe Track Series carbon fiber systems may feature: * Lightweight high-gloss, clearcoated 100 percent twill weave carbon fiber tubes * Large pre-oiled Pro 5R 5-layer washable/reusable high performance air filter * Stainless steel clamps, silicone couplers, and hardware * Housings made from XLPE (cross-linked polyethylene) polymer minimize warm engine air for maximum performance * Aluminum heat shields are one-piece, lightweight, and powdercoated black—block performance-robbing engine heat * Unique (patent-pending) filter-to-housing interface using fewer parts than traditional systems for a hassle-free installation
( 3 )
$791.70
—
$819.00
$712.53
—
$737.10
On Sale
aFe Momentum XP Alpha Raptor Pro Dry S air intake systems dominate with performance, style, and ease of installation. aFe Momentum XP Alpha Raptor Pro Dry S systems feature: * Outflows factory intakes by 28 percent * CAD-designed roto-molded housing * One-piece sealed housing * Built-in sight window provides easy inspection of filter without disassembly * Unique (patent-pending) filter-to-housing interface for easy installation * Dual inlet Pro DRY S 3-layer oil-free progressively finer porosity synthetic media for maximum performance, filtration, and convenience * 3 in. mandrel-bent equal length design intake tubes for balanced intake tube pressures and maximize airflow and velocity * Tubes are offered in wrinkle black powdercoat, blue powdercoat, or brushed aluminum finishes * No cutting or drilling on factory parts for faster installation * All clamps, couplings, and hardware are included * Direct bolt-on systems
Not Yet Reviewed
$613.00
$551.70
On Sale
Enjoy a custom look under the hood without compromising performance and quality with one of these aFe Momentum XP Pro Dry S Cold Air Intake Systems. They feature a unique one-piece sealed housing and a brushed aluminum intake tube, resulting in dyno-proven power gains. These intake systems are designed around the largest filter possible to allow maximum performance and filtration. Their unique filter-to-housing interface not only makes for a simple installation, but also allows for a large inverted air filter. The kits are available with different tube colors.
Not Yet Reviewed
$613.00
—
$729.00
$551.70
—
$656.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
