Availability
Showing In Stock Items. Show All 17 Items.
Maximize your engine's performance with Airaid SynthaMax CAD cold air intake kits. The cold air dam design seals directly to the hood and isolates engine heat away from your intake, allowing cooler air to run through the system. These cold air intake kits feature dual-layered SynthaMax filters, constructed using the finest 100 percent synthetic materials for unrivaled filtering efficiency. Servicing the filters is easy with oil-free maintenance—simply wash them in a mild household detergent and rinse. Airaid SynthaMax cold air intake kits are built with a hand-poured urethane body that won't crack, curl, or shrink. They use the stock air filter location, but add a boost with a huge air inlet that keeps more cold air flowing through the 360 degree filter. Hundreds of models are available for a wide range of vehicle applications. Maximize your horsepower, torque, and fuel efficiency with Airaid SynthaMax CAD cold air intake kits.
( 28 )
$419.99
—
$472.99
Built for power and show, K&N 69 Series Typhoon cold air intake kits are engineered to dramatically reduce intake restriction, resulting in additional horsepower and torque. These air intake kits primarily feature a free-flowing, mandrel-bent aluminum tube induction system designed to fit many performance vehicles. The Typhoon kits come in one of three designs: cold air intakes, short ram intakes, or complete cold air intakes—which can be configured as either cold air or short ram intakes. Some air intake models feature high-quality tube and end cap finish options, including polished aluminum, and black, blue, red, or silver powdercoated, among other options. Order the K&N 69 Series Typhoon cold air intake kit that is suited to fit your vehicle application.
( 461 )
$369.99
Volant PowerCore air intakes feature a heat-resistant air box that's designed to keep hot engine compartment air out of your air intake stream, pulling cold air from down below. This gives you a cold, dense air charge that delivers maximum punch and power potential. These PowerCore intakes also include an air filter that's specifically designed to stop ultra-fine particles from harming your engine. Order the model designed for your vehicle application. Other features and benefits: * Increased horsepower and fuel economy * PowerCore air filter material can even get wet without harm * Maintenance-free; never needs cleaned or oiled * Aluminum air box lid adds style to your engine compartment
( 174 )
$389.90
Spectre Performance cold air intake kits provide better acceleration and fuel economy for your truck or SUV. They're designed to replace your factory air filter and air box assembly, eliminating the restriction as they smooth and straighten airflow. The high-flow design of these intakes enables your engine to breathe in a larger volume of air, resulting in more usable power throughout the engine's entire rpm range. Hundreds of models are available, with various tube and filter options. Choose the kit tailored for fitment and performance on your make/model application.
( 830 )
$199.99
Eliminate your restrictive factory air box, filter, and intake tube. In their place, install one of the Volant MaxFlow 5 closed box air intake kits. They house a MaxFlow 5 oiled cotton gauze air filter that is cleanable and reusable. As an enclosed system, the air intake keeps your engine quiet at cruising speeds, but still allows it to roar to life when you stomp on the gas. This design protects the filter and ensures that colder air is pulled in from the fender instead of the engine bay—resulting in more horsepower and torque. These intake units are factory-tuned, and everything you need for installation is included. Volant MaxFlow 5 air intake kits are available for fitment on a variety of makes and models.
( 171 )
$329.90
—
$335.90
Designed to reduce air inlet restriction, Lingenfelter high performance air intake kits are easy to install and help maintain a high-quality factory appearance. They provide lower temperature air from outside the engine compartment for optimal automotive performance. These kits include an S & B washable air filter, housing, fasteners, and detailed installation instructions. They are the easiest bolt-on upgrade you can do to let your automotive creation breathe.
( 3 )
$267.85
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 723 )
$360.99
If you've installed Lingenfelter overdrive harmonic balancers to increase boost by raising the rpm of your supercharger, air intake elbow upgrade kits may need to be used in conjunction. During dyno testing Lingenfelter has identified issues with OEM air intake ducts sucking shut with the higher air flow created by an overdrive harmonic balancer kit. These air intake elbow kits will prevent this problem by replacing the stock soft rubber air duct. These kits come complete with 4 in. hump hose, 4 in. rubber connector, clamps, fittings, and all required parts.
Not Yet Reviewed
$279.25
aFe Momentum Pro Dry S air intake systems are designed around large 7.5 in. tall, oil-free, 3-layer filters with progressively finer porosity synthetic media. Each of these incredible filters fit into an equally impressive one-piece housing with an auxiliary air scoop and a large clear sight window. When combined with the housing, these systems outflow the factory unit by 31 percent—yielding average gains of 11 hp and 13 lbs.-ft. of torque. They also include a urethane plug to block the scoop if not used. Give your engine more go power with aFe Momentum Pro Dry S air intake systems.
( 3 )
$420.00
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 61 )
$433.00
Airaid SynthaFlow CAD cold air intake kits supply your engine with maximum cold airflow for maximized performance! Their cold air dam design isolates engine heat away from your intake to keep the cold air flowing. Airaid CAD intakes house SynthaFlow oiled, washable filters that are handmade from multi-layered cotton gauze and the finest synthetic materials to trap the smallest particles of dirt. Airaid SynthaFlow cold air intake kits install easily in the stock air filter location and will flow colder air through the filter and to your engine for a boost of power.
( 4 )
$419.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
