Availability
Summit Bucks
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 312 )
$227.95
—
$498.95
Summit Bucks
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 566 )
$270.95
—
$627.95
Summit Bucks
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 221 )
$356.95
—
$481.95
Summit Bucks
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$519.95
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$339.95
Summit Bucks
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 437 )
$645.95
—
$660.95
Summit Bucks
ProCharger P-1SC-1 Stage II supercharger systems deliver larger power gains, coolest charge air temperatures, and the greatest reliability. Thanks to many years of forced induction engineering and innovation, ProCharger technology offers extremely low charge air temperatures, that also provides much better engine longevity by protecting your motor from detonation. The P-1SC-1 Stage II supercharger systems are complete kits with their most-advanced, quiet, and self-lubricating superchargers, highly effective and larger air-to-air intercoolers, handheld programmer, and other components that create an attractive, OEM-quality installation. Cooler air makes more power, and ProCharger P-1SC-1 Stage II intercooled systems supply lots of it to increase horsepower and performance.
( 1 )
$8,299.00
—
$20,399.00
On Sale
Summit Bucks
Summit Racing™ Performance turbochargers have the latest in compressor aero technology with quick-spooling, yet free-flowing turbines. Starting with 66mm inducer sizes and working up to 79mm, the SUM-2600 Series turbos are reliable and a great value. The SUM-2700 Series are true race turbos starting at 76mm and go up from there. T4, T6, and V-band turbine housings are available. These are specially designed, balanced, and precision assembled in North America for class leading racers. They feature 2618 billet forged compressor wheels that offer superior flow and dependability at high boost.
( 7 )
$1,695.99
$899.99
—
$1,699.99
Delphi fuel injectors are engineered with an accurate, controlled spray pattern that reduces emissions and improves cold-start capabilities. These replacement injectors have a recessed fuel exit and no internal seal rings—in order to minimize leakage and possible puddling. Delphi fuel injectors are durable, dependable, and offered for a wide variety of applications. Order the OEM stock replacements designed for your vehicle.
( 9 )
$69.99
—
$808.99
Edelbrock Performer 454 TBI intake manifolds deliver outstanding performance for the street while maintaining operational compatibility with OEM accessories. Performer 454 TBI manifolds accept the stock EGR in the stock location.
( 10 )
$562.95
Delphi electric fuel pumps are manufactured from high-quality materials. They operate under extreme temperatures and provide your vehicle with quicker engine starts. These fuel pumps are designed to be OE replacements, though universal models are also available. Find the free flow rate, maximum pressure, inlet size, and other options needed for your application. When fuel pressure becomes a problem for your vehicle, order a new Delphi electric fuel pump to restore performance!
( 48 )
$23.99
—
$1,120.99
Summit Bucks
Add Delphi fuel injection idle air control valves to control the airflow into your engine. Delphi OE replacement valves provide a superior fit and finish that result in an easier installation for you. Their idle air control valves meet federal emissions regulations, increase your fuel efficiency, and eliminate the potential for malfunctions. Get control over the amount of air allowed to flow into your engine, and your engine idle speed, in a variety of load conditions when you replace your air control valves with Delphi fuel injection idle air control valves.
( 34 )
$36.99
—
$81.99
Edelbrock Performer manifolds are designed for street 1987-94 Chevy V6s with factory throttle body injection. They provide outstanding throttle response and torque increases. They accept all factory accessories and hardware, and your throttle body stays in its stock location. A computer chip is available at no charge and is street-legal for 4.3L trucks (E.O. #D-215-21). Return the postage-paid card that comes with the manifold to receive the chip from Edelbrock.
( 10 )
$595.95
Delphi mechanical fuel pumps deliver the fuel for classic vehicles—including Chevy and Ford models from the '40s, '50s, '60s, and '70s. Manufactured to quality standards, these replacement pumps are validated, tested, and matched to the correct vehicle application. Do you need a pump for your older-model carbureted system? Delphi mechanical fuel pumps will provide the appropriate performance for your system.
( 54 )
$18.99
—
$92.99
Summit Bucks
Fel-Pro fuel injector O-ring sets help maintain performance vehicle. These replacement rings are engineered to offer a good, tight seal and prevent fuel leakage into hot engine compartments. Over time, your factory O-rings can become worn or cracked—leading to erratic fuel injection. Update the small accessories with the Fel-Pro set recommended for your vehicle and engine application.
( 9 )
$5.99
—
$39.99
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 251 )
$69.99
—
$1,762.99
Summit Bucks
These Fel-Pro intake manifold bolts are constructed from high-quality steel to strict tolerances. Fel-Pro has your fastening needs covered.
( 13 )
$29.99
—
$43.99
Summit Bucks
Fel-Pro offers marine carburetor mounting gaskets for a variety of watercraft applications. They're available in numerous styles and configurations for dependable carb sealing, in and out of the water.
( 12 )
$9.99
—
$17.99
Summit Bucks
Fuel injection pressure regulators directly affect your engine and vehicle performance and can be a major contributor or hindrance to fuel economy. Delphi fuel injection pressure regulators provide consistent and predictable fuel pressure for superior drivability. These regulators maintain the correct pressure from your tank to the injector for varied driving conditions, providing enhanced fuel control accuracy. Delphi fuel injection pressure regulators feature precisely manufactured internal valves, diaphragms, and springs for excellent performance, longer life, and improved durability.
( 35 )
$23.99
—
$284.99
Limit nitrogen oxide emissions with Delphi EGR valves! Delphi EGR valves recirculate controlled amounts of inert gases into the intake system, where they mix with incoming air and lower the combustion temperature below the level at which nitrogen oxide is formed. They feature a robust design, constructed with stainless steel valves and components that provide resistance to corrosion, high temperatures, and wear. Delphi EGR valves are available with solenoid, torque motor, or direct current (DC) motor actuators to help meet your individual needs.
( 24 )
$59.99
—
$156.99
Summit Bucks
Performance Tool vacuum cap kits provide a quick and sure way to seal vacuum connections. Use them on carburetors, manifolds, or where various vacuum tube caps are needed. Cap lines and hoses while testing emission control systems, diaphragm, and much more. Performance Tools vacuum caps are constructed from durable and heat-resistant Nitrile rubber.
Not Yet Reviewed
$18.99
These Delphi fuel pump strainers are designed to keep dirt, dust, and other particles out of your fuel pump and away from your fuel system. They are manufactured from quality materials and install easily in the factory location.
( 12 )
$5.99
—
$44.99
Performer Air-Gap intake manifolds incorporate technology from Edelbrock's potent Victor series manifolds, with an air-gap design feature for ultimate street performance from idle to 5,500 rpm. The air-gap is an open air space which separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge, meaning more power and excellent throttle response throughout the power band. Order the Edelbrock Performer Air-Gap intake manifold best suited for your application.
( 31 )
$530.95
Summit Bucks
ProCharger P-1SC-1 High Output supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 High Output kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.
Not Yet Reviewed
$7,799.00
—
$9,999.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
