Availability
Summit Bucks
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$227.95
—
$639.95
Summit Bucks
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 566 )
$270.95
—
$627.95
Summit Bucks
Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.
( 10 )
$1,027.95
Summit Bucks
These Performer RPM FE intake manifolds from Edelbrock are designed for high-performance street Ford FE V8s with standard low/medium-rise or Edelbrock Performer RPM FE heads. Their dual-plane constant cross-sectional area design builds low and mid-range acceleration, while optimized runner paths make top-end horsepower. These manifolds have a provision for adding the PCV or breather flange at the rear, and no exhaust crossover passage.
( 37 )
$736.95
—
$865.95
Summit Bucks
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 221 )
$296.95
—
$1,070.95
Summit Bucks
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 437 )
$603.95
—
$681.95
Summit Bucks
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$519.95
Summit Bucks
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$339.95
—
$482.95
Summit Bucks
Edelbrock Performer RPM LS1 intake manifolds are manifold-only packages that allow you the opportunity to use a carburetor on these originally computer-controlled engines. Edelbrock LS1 intake manifolds are manufactured from aluminum and offer you the ability to maximize torque and increase the power curves of your engine. Are you going back to the traditional carburetor? Rely on Edelbrock Performer RPM intake manifolds.
( 12 )
$407.95
—
$638.95
Summit Bucks
Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.
( 21 )
$389.95
On Sale
Summit Bucks
Summit Racing™ Performance turbochargers have the latest in compressor aero technology with quick-spooling, yet free-flowing turbines. Starting with 66mm inducer sizes and working up to 79mm, the SUM-2600 Series turbos are reliable and a great value. The SUM-2700 Series are true race turbos starting at 76mm and go up from there. T4, T6, and V-band turbine housings are available. These are specially designed, balanced, and precision assembled in North America for class leading racers. They feature 2618 billet forged compressor wheels that offer superior flow and dependability at high boost.
( 7 )
$1,695.99
$899.99
—
$1,699.99
Summit Bucks
ProCharger P-1SC-1 Stage II supercharger systems deliver larger power gains, coolest charge air temperatures, and the greatest reliability. Thanks to many years of forced induction engineering and innovation, ProCharger technology offers extremely low charge air temperatures, that also provides much better engine longevity by protecting your motor from detonation. The P-1SC-1 Stage II supercharger systems are complete kits with their most-advanced, quiet, and self-lubricating superchargers, highly effective and larger air-to-air intercoolers, handheld programmer, and other components that create an attractive, OEM-quality installation. Cooler air makes more power, and ProCharger P-1SC-1 Stage II intercooled systems supply lots of it to increase horsepower and performance.
( 1 )
$8,299.00
—
$20,399.00
Summit Bucks
Edelbrock Performer 454 TBI intake manifolds deliver outstanding performance for the street while maintaining operational compatibility with OEM accessories. Performer 454 TBI manifolds accept the stock EGR in the stock location.
( 10 )
$562.95
Summit Bucks
These Edelbrock Buick B-4B intake manifolds are a resurrection of the popular B-4B manifolds made in the late 1960s for street use. The only change to the original design is the addition of Edelbrock's proven Performer-style mounting pad that accepts either square bore or spread bore carburetors. That addition makes these manifolds an excellent choice for both restoration and performance-minded Buick fans.
( 5 )
$573.95
Summit Bucks
Fel-Pro fuel injector O-ring sets help maintain performance vehicle. These replacement rings are engineered to offer a good, tight seal and prevent fuel leakage into hot engine compartments. Over time, your factory O-rings can become worn or cracked—leading to erratic fuel injection. Update the small accessories with the Fel-Pro set recommended for your vehicle and engine application.
( 9 )
$5.99
—
$282.99
Summit Bucks
Performer Air-Gap intake manifolds incorporate technology from Edelbrock's potent Victor series manifolds, with an air-gap design feature for ultimate street performance from idle to 5,500 rpm. The air-gap is an open air space which separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge, meaning more power and excellent throttle response throughout the power band. Order the Edelbrock Performer Air-Gap intake manifold best suited for your application.
( 31 )
$530.95
Summit Bucks
These Fel-Pro intake manifold bolts are constructed from high-quality steel to strict tolerances. Fel-Pro has your fastening needs covered.
( 13 )
$29.99
—
$43.99
Summit Bucks
If you want to build a carbureted LS3 engine. Edelbrock's Performer RPM LS3 intake manifolds afford you that opportunity. Originally computer-controlled engines, you can top your LS3 with one of these Performer RPM manifolds and a carburetor to gain maximum power and a broad torque curve. They include provisions for a timing control module, passages for clean-look wiring, and a special throttle/transmission bracket to make these units an easy retro-fit. Go carbureted with Edelbrock Performer RPM LS3 intake manifolds.
( 1 )
$422.95
Performance Tool vacuum cap kits provide a quick and sure way to seal vacuum connections. Use them on carburetors, manifolds, or where various vacuum tube caps are needed. Cap lines and hoses while testing emission control systems, diaphragm, and much more. Performance Tools vacuum caps are constructed from durable and heat-resistant Nitrile rubber.
Not Yet Reviewed
$18.99
Summit Bucks
Fel-Pro offers marine carburetor mounting gaskets for a variety of watercraft applications. They're available in numerous styles and configurations for dependable carb sealing, in and out of the water.
( 12 )
$3.99
—
$17.99
Summit Bucks
Edelbrock Performer manifolds are designed for street 1987-94 Chevy V6s with factory throttle body injection. They provide outstanding throttle response and torque increases. They accept all factory accessories and hardware, and your throttle body stays in its stock location. A computer chip is available at no charge and is street-legal for 4.3L trucks (E.O. #D-215-21). Return the postage-paid card that comes with the manifold to receive the chip from Edelbrock.
( 10 )
$595.95
Summit Bucks
Seal the fuel in your carburetor where it belongs. Whether you're servicing or rebuilding your carburetor, these Russell carburetor sealing washers will stop leaks from forming around the carburetor's fuel inlet. They are manufactured from stainless steel, so they will stand up to multiple uses. Available in different sizes, Russell carburetor sealing washers are the right choice for your carburetor fuel inlet fitting installation.
( 9 )
$3.95
Summit Bucks
ProCharger P-1SC-1 High Output supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 High Output kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.
Not Yet Reviewed
$7,799.00
—
$9,999.00
Summit Bucks
ProCharger P-1SC-1 supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. Their extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. These supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your application.
( 9 )
$7,999.00
—
$8,199.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
