Availability
On Sale
Holley gasoline carburetor jet assortment kits are the professional way to track-tune your Holley carburetor for top performance. They consist of two each in different jet sizes. The jets are contained in either a plastic case or aluminum plate that are designed to keep them separated and make them easily accessible.
( 106 )
$65.39
—
$96.05
$58.85
—
$86.45
On Sale
Holley air bleed assortment kits are a must when track-tuning a 4500 Dominator HP carb for maximum performance. They include four of each air bleed size from 23 to 79, and feature 10-32 UNF threads.
( 6 )
$349.95
$314.95
On Sale
Holley carburetor float kits work with side-hung and center-hung Demon and aftermarket Holley carburetor floats, as well as many OE Holley, Ford, Chrysler, GM, Motorcraft, AMC, and Rochester marine carburetors. Offered in brass and Nitrophyl for internally and externally adjustable floats, they're available as primary floats, secondary floats, and secondary floats with notches that include jet extensions. Holley's wedged floats feature a reinforced float bracket assembly that allows more fuel to flow through the bracket—especially when using bottom-feed needles and seats. Technical notes for Holley carburetor float kits: * Wedged floats are designed for oval track use, so the float stays open in turns * The use of brass floats on the secondary side of Model 4160 carburetors factory-equipped with Nitrophyl floats may result in loss of fuel control and flooding if the floats contact the metering plate * You should only install jet extensions and notched floats in rear fuel bowls
( 108 )
$20.17
—
$49.95
$18.15
—
$44.95
On Sale
Holley standard main jets are just what you need to fine-tune your carburetor for street or race performance. Threaded for easy installation and removal, they manufacture these brass jets to high tolerances for consistency. They're available in dozens of jet and jet drill sizes for precise fitment on countless gasoline-fueled vehicles. When considering replacement parts for your carburetor, trust the expertise of Holley.
( 199 )
$13.95
—
$14.33
$7.88
—
$12.90
On Sale
Power valve blowout protection can be added to carb models 2300, 4150, and 4160 with these Holley power valve check ball kits. These kits include a spring, a brass seat and check ball, a drill bit, and a stop. They will effectively protect the power valve, and are easy to install.
( 26 )
$31.79
$28.61
On Sale
Upgrade your carburetor's hardware for maximum performance with the help of Holley. Their needle and seat hardware kits work with all Holley carbs with an adjustable needle and seat. Also keeping style in mind, these kits are offered in gold or black. Kits include adjusting nut, lock screw, gaskets, and O-ring.
( 20 )
$11.40
$10.26
On Sale
Holley carburetor fuel inlet filters are moraine-type fuel inlet filters that fit Holley 4-barrel street carburetors with center-hung float bowls or square bowls. They are also great stock replacements for some original equipment carburetors.
( 24 )
$25.42
$22.88
On Sale
Keep your carb precisely tuned for efficient performance. Holley air bleed kits are designed to fine-tune your carburetor's intermediate and high-speed circuits. They are made from high-quality brass.
( 14 )
$28.03
$15.42
On Sale
Want to upgrade your street carburetor to a high performance race carb, but don't have the means to do a complete carb swap? If you can turn a screwdriver, you can get 25 to 50 hp from these Holley carburetor main bodies. With no air horn, choke tower, or choke control to restrict airflow, they deliver extra power easily and affordably. These main bodies are available in a standard dichromate or shiny finish.
( 75 )
$213.15
—
$372.95
$117.95
—
$246.55
On Sale
EBC offers Keihin-style pilot jets for a variety of ATV and UTV applications. These brass carburetor replacement jets are available in multiple sizes to accommodate most off-road machines.
Not Yet Reviewed
$18.93
$17.04
On Sale
EBC offers replacement Keihin powersports carburetor main jets for a variety of applications—including the Dealer Selection Jet Kits. These brass gasoline-type jets are designed for Harley-Davidson CV-style Keihin carbs. They're flow-calibrated and extremely accurate in terms of fuel flow rate, as stamped. The main jets are available in sizes from 165 to 205 and are sold in pairs.
( 1 )
$4.65
$4.18
On Sale
EBC offers slot-head main jets for a variety of ATV and UTV applications. These brass carburetor replacement jets are available in multiple sizes to accommodate most off-road machines.
Not Yet Reviewed
$10.84
$9.76
On Sale
Aeromotive fuel pressure sensor adapters allow the installation of Aeromotive high-flow fuel rails on stock engines when keeping the stock returnless fuel system. They're manufactured from billet aluminum and are black anodized for protection. Aeromotive fuel pressure sensor adapters provide the proper sealing port, bolt pattern, and mounting hardware to accept the stock Ford fuel pressure sensor, or couple it directly to the Aeromotive high-flow fuel rail. Order the model recommended for your vehicle.
( 4 )
$12.70
$11.43
On Sale
Holley alcohol jets are specially designed to work with the unique metering blocks of alcohol carburetors. The metering blocks accept the physically larger size of these jets.
( 1 )
$21.20
—
$22.41
$11.66
—
$12.33
On Sale
Make small airflow adjustments with these Quick Fuel air bleed assortment kits. They include four of each sized air bleed to optimize the air coming into the carburetor. Now, you can tune your carburetor for different tracks, elevations, or air conditions. Eliminate low and high-speed idle problems with one of the Quick Fuel air bleed assortment kits.
( 13 )
$96.75
$87.05
On Sale
These EGR adapter fittings are designed for use with Professional Products manifolds and will also work on similar Edelbrock EGR small block Chevy manifolds. Professional Products EGR adapters can resolve some mounting interference with valve covers or carburetors on some applications when using these manifolds.
Not Yet Reviewed
$4.99
$4.49
On Sale
Holley EFI Terminator X fuel injectors feature a precision lapped disc valve, high-quality brass windings, and high-temperature O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. you are sure to find an injector that matches your non-emissions-controlled application. Holley EFI Terminator X fuel injectors can also be used with any ECU that utilize high-impedance fuel injector drivers. Features: * PICO/EV6-style performance injectors are sold individually or in a set of 8 * High impedance for use with saturated drivers * Rated injector flow 220 lb./hr. at 43 psi of base fuel pressure * USCAR injector connector * 40mm O-ring to O-ring length * Compatible with many OEM LS intake manifolds * Easy to install in any Holley EFI Hi-Ram intake, using Holley fuel rail adapter kit
( 30 )
$71.29
—
$999.95
$64.15
—
$898.95
On Sale
Multi-port EFI systems require a stable fuel supply to maintain the best performance throughout the engine's rpm range. MSD high-pressure, high-flow fuel pumps feature a roller vane pump mechanism, which is extremely resistant to clogging and jamming. The pumps mount in-line (out of the tank) with two supplied cushioned clamps for a quick and sturdy installation. The wire terminals feature brass studs for secure connections. These MSD pumps are ideal as "boosters" for nitrous oxide applications, or as stand-alone pumps for multi-port EFI systems on engines up to approximately 500 hp.
( 50 )
$162.95
$146.65
On Sale
Holley Sniper fuel injectors feature a precision lapped disc valve, high-quality brass windings, and high-temperature O-rings to provide excellent linearity with no discernible "bounce" at low-pulse widths. Features include: * PICO/EV6-style performance injectors * High-impedance (12.2 ohms) for use with saturated drivers * Rated injector flow: 36 lbs./hr. at 43 psi * Supports up to 575 hp * Tri-cone spray pattern
( 1 )
$649.95
$583.95
On Sale
Holley Terminator EFI fuel injectors provide excellent linearity with no discernible "bounce" at low pulse widths, as commonly found in other injectors. They feature a precision-lapped disc valve, high-quality brass windings, and high-temperature O-rings. They're available in 80 or 205 lbs./hr. flow rates to accommodate a variety of vehicles—from mild street cars to high-horsepower race applications. Holley Terminator EFI fuel injectors provide precision fuel delivery you can depend on. Features: * Bosch/EV14 performance injectors * High-impedance for use with saturated drivers * Rated injector flow varies by model * Supports up to 2,600 hp (8 injectors) * Maximum recommended fuel pressure: 75 psi * May require Holley EFI systems wiring harness
( 1 )
$149.95
$134.95
On Sale
Quick Fuel carburetor floats are offered with center and side pivots for primary and secondary float bowls and are available in brass and a variety of Nitrophyl designs. Quick Fuel Nitrophyl offerings include: * Wedged primary floats designed for oval track use (also used on dual 4-barrel setups) that allow fuel to move to the back of the bowl to keep the float open in turns * Alcohol compatible floats * Wedged secondary floats * Road race floats molded with wedges on both sides for fuel control in right and left turns * Notched dual-wedge floats--also used on road race cars
( 11 )
$44.53
$40.08
On Sale
Holley Sniper EFI fuel injectors provide excellent linearity with no discernible "bounce" at low pulse widths, as commonly found in other injectors. They feature a precision-lapped disc valve, high-quality brass windings, and high-temperature O-rings. Order a set of eight Holley Sniper EFI performance fuel injectors for use with your Holley EFI intake manifold. Features: * PICO/EV6-style performance injectors * High impedance (12.2 ohms) for use with saturated drivers * Rated injector flow: 36 lbs./hr. at 43 psi * Supports up to 575 hp (maximum) * Tri-cone spray pattern * Not intended as service injectors for Sniper EFI TBI product line
( 1 )
$86.95
$78.25
On Sale
Looking for remote mounting brackets for modern 3-wire Bosch sensors used in GM LS engines? Aeromotive VaporWorx MAP sensor mounting bracket/blocks can be your solution. Compact and rugged, these kits come with everything needed to remote mount your sensor, including the electrical plug and components. They are ideal for mounting the Bosch-style 3-wire MAP sensor and for dynamometer operators looking for a simple to use and adapt system. Features and contents: * 6061 Type III hard coat anodized aluminum * 3-pin plug, terminals, and seals * Brass barb fitting for 1/8 in. hose x 1/8 in. NPT thread * Sufficient clearance to use larger hoses or AN fittings for vacuum line * MAP sensor hold-down screw * Stainless steel mounting screws * Four feet of vacuum hose
( 1 )
$64.70
$58.23
On Sale
Aeromotive fuel pressure regulator breathers make ideal replacements (where required) for the vacuum/boost ports found on all Aeromotive bypass regulators. They're machined from quality materials and feature male threads. A sintered brass filter allows air to move into and out of the regulator cap as needed while preventing dirt and debris from entering. Aeromotive fuel pressure regulator breathers work perfectly for any application that does not require fuel pressure to be influenced by manifold pressure.
( 3 )
$9.85
$8.86
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
