Availability
On Sale
Get super performance from Mr. Gasket! These Grade 5 hex head bolts are black coated plated for protection and appearance. They feature a generous underhead radius for added strength, and hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
( 4 )
$31.44
$28.30
On Sale
These Grade 5 hex head and socket head intake manifold bolts are bright zinc plated for protection and appearance. Kits include hardened flat washers for uniform torque and to prevent galling on aluminum intake manifolds.
( 14 )
$17.60
—
$22.94
$15.84
—
$20.65
On Sale
These special Grade 8 intake manifold bolts from Mr. Gasket feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They're ideal for use where space is minimal, typical on larger runnered race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
( 1 )
$36.83
$33.15
On Sale
MSD LS Airforce intake fastener kits serve as high-quality bolt replacements, specifically designed for the MSD Airforce intake manifolds (2701 and 2702 models). The Allen head style bolts are made from stainless steel with a natural finish and come with washers to facilitate fuel injection throttle body attachment.
( 1 )
$249.95
$137.95
On Sale
FASS Fuel Systems banjo bolt removal kits allow you to replace fuel pump fittings on a variety of engine applications. These kits include various sizes and quantities of straight and 90 degree steel fittings, as well as fuel hose. Order the model recommended for your vehicle.
( 5 )
$51.30
$46.17
On Sale
JET Quadrajet bolt kits are designed to properly fit various Quadrajet and Rochester Quadrajet carburetors. They include two long bolts, two studs, and the accompanying washers and nuts. JET Quadrajet bolt kits are standard hex-style, stainless steel with a polished finish.
( 3 )
$14.21
$12.79
On Sale
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$774.86
$706.98
On Sale
Summit Racing™ intake manifold and installation Pro Packs are now all in one part number. With Summit Racing™ intake manifold and installation Pro Packs, you can get your satin-finished, square-bore intake, plus all of the installation items that you need to finish the job, and save time and money! These Pro Packs also include Loctite black RTV sealant.
( 42 )
$330.89
—
$568.89
$303.80
—
$520.20
On Sale
Updating your racing fuel system to EFI is so simple! Holley Sniper presents their latest diecast fuel cell EFI pump modules designed to drop in as a direct replacement for your existing 6- or 12-bolt flange fuel cell cap assembly. The diecast aluminum top flange includes an -6AN inlet port, a -6AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 11 in. deep. The EFI modules are available with single 340 lph fuel pumps in both return and returnless system designs. These fuel cell EFI fuel pump module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line. Features include: * Easy way to update your fuel cell to EFI * Designed to drop right into your existing 6-bolt flange fuel cell * Diecast aluminum top flange housing includes a -6AN inlet and -6AN outlet port and a fuel filler cap * Pump depth is fully adjustable for fitment in the most popular cell sizes 7.5 in. to 11 in. * EFI modules are available with single 340 lph fuel pumps in both return and returnless system designs
( 9 )
$424.95
$381.95
On Sale
Summit Racing™ induction kit Pro Packs have an Edelbrock Performer RPM intake manifold designed to produce an excellent balance of broad torque, upper-rpm horsepower, and throttle response for the street, with a maximum performance of 1,500-6,500 rpm. To top them off, we've added an Edelbrock Performer 600 cfm carburetor, a 14 in. chrome steel Summit Racing™ air cleaner, zinc plated Summit Racing™ carb studs, a set of ARP black-oxide coated chromoly intake manifold bolts, and a Fel-Pro Printoseal intake manifold gasket set.
( 1 )
$945.86
$861.78
On Sale
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 39 )
$249.95
—
$349.95
$192.95
—
$288.85
On Sale
Holley throttle body angle adapters resolve problems. The considerable angle of the LT intakes can cause issues routing inlet plumbing and clearance to aftermarket accessory brackets. These adapters level the throttle body for swap applications without changing the flow the GM design intended. Other four-bolt intakes with routing issues can also benefit from this adapter. Features and benefits of Holley throttle body angle adapters: * Billet aluminum construction * Maintains proper throttle body blade orientation * Eliminates drivability issues associated with inverting the throttle body * Allows clearance to aftermarket accessory brackets or other clearance and routing issues * No harness rerouting or extending required * Works with both truck and car LT intake bolt patterns * Works with all 4-bolt LS intake bolt patterns * Works with up to 95mm intakes and throttle body openings * Works with common LS and LT 104 x 70mm bolt pattern throttle bodies * Adapts common LS 104 x 70mm bolt pattern throttle bodies to LT 5.3L truck intakes * Works with Holley 92/95mm Hi-Ram and Mid-Ram intakes * Allows use of cable-operated and other throttle bodies on Gen V 5.3L intakes
( 5 )
$90.39
$81.35
On Sale
Summit Racing™ induction kit Pro Packs have a GM Performance Parts intake manifold designed to produce an excellent balance of broad torque, upper-rpm horsepower, and throttle response for the street. To top them off, we've added a Holley Street Avenger 770 cfm carburetor, a 14 in. chrome steel Summit Racing™ air cleaner, zinc plated Summit Racing™ carb studs, a set of ARP black-oxide coated chromoly intake manifold bolts, and a Fel-Pro Printoseal intake manifold gasket set.
Not Yet Reviewed
$1,328.36
$1,257.36
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$1,125.51
—
$1,157.51
$1,021.51
—
$1,050.51
On Sale
These intake manifold bushings are included with all Professional Products small block Chevy manifolds (except Vortec models) and permit the use of these manifolds on 1987-95 cylinder heads. Straight and angled versions are available .
( 14 )
$15.99
$14.39
On Sale
Holley fuel cell EFI pump module assemblies are the easy way to upgrade your racing fuel system! And even though the name includes EFI, the modules can also be used as an upgrade for carbureted systems, with the proper regulator. Designed as drop-in direct replacements for your existing 6 or 12-bolt flange fuel cell cap assembly, the billet top flange includes an 8 AN inlet port, a 10 AN outlet port, and a fuel filler cap. They offer a fully adjustable fuel pump depth from 7.5 in. to 12 in. deep, and the modules are available in single or dual 255 lph and 450 lph fuel pump configurations. Holley fuel cell EFI pump module assemblies include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Order the model that best suits your application.
( 6 )
$565.95
—
$828.95
$311.95
—
$745.95
On Sale
Holley Sniper EFI throttle lever extensions bolt directly onto your current throttle lever, increasing the mechanical advantage of your throttle cable, or rod. This results in a significantly decreased pedal effort, and smoother pedal feel, especially at low throttle input, such as when you are leaving a stoplight. They are ideal if a stiffer throttle pedal is noticed after an EFI conversion. Features: * Direct bolt-on installation * Hardware included * Decreases pedal effort for smoother driving characteristics * Corrects poor throttle cable/rod geometry
( 64 )
$19.97
$17.97
On Sale
MSD Atomic AirForce throttle body adapters are designed to attach an OEM LS1/LS6 factory throttle body to an MSD Atomic AirForce polymer intake manifold. They're made from quality materials and install onto the MSD Atomic AirForce with no modifications.
( 1 )
$77.85
$58.39
On Sale
Holley EFI Dominator throttle bodies are the ultimate air valves for your hotrod's powerplant. These billet aluminum 2,550 cfm throttle bodies are loaded with features that will make them at home on even the largest displacement engines. They showcase roller bearing throttle shafts for ultra-smooth throttle action, non-contact magnetic throttle position sensors (TPS) sensors, and index-able throttle levers. Their lightweight construction also features dual throttle blades for maximum airflow and they are available with and without supplemental injector provisions (four injectors per throttle body and rails). Want to maximize your engine's power? Whether you have a turbo, supercharger, or a big cam engine pumping massive gulps of air, Holley EFI Dominator-flange throttle bodies will make the most of your fuel injection.
Not Yet Reviewed
$2,199.95
$1,429.95
On Sale
Holley RetroFilter air cleaners cleverly hide an LS drive-by-wire throttle body inside to maintain a low height and classic looks. Utilizing a hidden opening in the base to hide unsightly wiring from the throttle body, this trick air cleaner allows you to experience all the benefits of modern technology and keep the vintage look you want. Pair with any Holley intake manifold with a 4150/4610 square bore flange for maximum aesthetics and performance. The opening is 92mm, but any 4-bolt pattern LS throttle body will physically fit. Holley recommends the LS2/LS3/LS7 style but the L33, L76, and L92 should also fit. RetroFilter DBW air cleaners are available in a 16 in. round or 14 in. dual snorkel style with either a black or chrome finish. Choose the one you prefer under the hood of your vehicle. Features: * Allows full EFI functionality stealthily hidden within a traditional looking air cleaner package * Each kit includes a 3 in. tall, pre-oiled, washable, and reusable premium cotton gauze filter element * Adapts to LS-style drive-by-wire throttle bodies found on the LS2, LS3, LS7, etc. * Can be installed on any vehicle running a top mounted 4150/4-barrel EFI capable intake manifold with LS3 DBW wiring components * Stamped aluminum lid and base for optimal durability and lightweight Note: Requires adapter to connect to 4150/4160 square bore flange-style manifold. Holley EFI part no. 17-93 is recommended.
( 2 )
$211.95
—
$263.95
$190.75
—
$237.55
On Sale
Holley Fuel Cell EFI pump module/VR Series brushless fuel pump assemblies are engineered to give you VR fuel pump power inside your cell. Designed as direct drop-in replacements for your existing 6-, 10-, or 12-bolt flange fuel cell cap assemblies, they're made to work on high-boosted race cars, as well as your daily driven weekend endurance car. Built for continuous duty if needed, The VR Series of pumps include 2-step controllers for precise low or full speed pump control and harnesses. Holley Fuel Cell EFI pump module kits include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Features: * Billet top flange includes a -8 AN inlet port, a -10 AN outlet port, and a fuel filler cap * Fuel pump depth is fully adjustable from 7.5 in. to 11 in. deep * Capable of 130 psi, while providing significant flow for forced induction applications where belt-driven pumps are normally used * Billet aluminum construction for durability and good looks * High-flow and high-pressure with low-amperage draw * Can be fully submerged in the fuel cell or chassis mounted * Maximum amp draw of 38 amps for the VR Series * Single VR1 brushless fuel pump includes one 2-step controller and harness * Dual VR2 brushless fuel pumps include two 2-step controllers to control pumps independently of each other and harnesses * Can be used as an upgrade for carbureted systems with the proper regulator
Not Yet Reviewed
$1,549.95
$1,393.95
On Sale
APR intercooler hose kits include both inlet and outlet hoses to upgrade your failure-prone rubber hose and worm clamp setup with multi-ply silicone and T-bolt clamps. These kits include a multitude of enhancements designed for maximum performance, longevity, and insurance against power-robbing boost leaks. Features include: * Direct OEM replacement: Compatible with OEM/APR intercoolers, OEM throttle body, and all OEM turbochargers * EZ-Flow stepped design creates a smooth airflow path, reducing turbulence over non-stepped designs * Four-ply silicone provides the thickness and strength to support boost levels, and better heat resistance * Fluorosilicone internal lining ensures hose does not rapidly deteriorate over time when exposed to oil and gasoline from the PCV and EVAP systems * Clampco stainless steel T-bolt clamps offer increased strength and decreased hose slippage
( 2 )
$209.95
$188.95
On Sale
These K&N powersports performance air filters are ideal for extended use in dirty and dusty off-road riding and provide clean carburetion, even at high altitudes. As a rule, no jet changes are required with just a K&N filter element. K&N powersports performance air filters are washable and reusable and provide for high airflow with excellent filtration.
( 86 )
$79.99
—
$104.99
$63.99
—
$83.99
On Sale
K&N RK Series air filter assemblies are a remarkable combination of performance and style. They are custom designed for your cruiser, machined from billet aluminum, and offered in two unique styles. These complete, ready-to-use assemblies are also available in a choice of finishes to complement the style of your Harley® motorcycle. If you're looking for an aggressive appearance and a significant increase in airflow that results in more power, than these high-flow filter setups are exactly what you need. Order the K&N RK Series air filter assemblies best suited for your application.
( 10 )
$262.99
—
$314.99
$212.99
—
$264.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
