Availability
Showing In Stock Items. Show All 17 Items.
On Sale
Fluidyne heat exchangers and intercoolers are designed to keep your turbocharged or supercharged engine working at optimum levels. A cooler intake charge means more power from your engine. These units are made from aluminum and precision-welded for maximum efficiency and durability. The coolers use mounting tabs welded to the outer case for a simple installation. Order the size or model recommended for your application.
( 9 )
$467.00
—
$1,054.00
$396.95
—
$948.60
On Sale
Holley boost control solenoids are designed for optimal performance when using the boost control function of Holley EFI. Some setups require two solenoids and some require one. They're driven by a Pulse Width Modulated (PWM) output of the ECU. It is advised NOT to use the PWM+ outputs on a Holley HP ECU, but rather use the PWM- outputs. If you have a Holley Dominator ECU, use either the PWM- outputs or a PWM+ output on the J2B connector.
( 4 )
$182.95
$118.95
On Sale
Summit Bucks
Summit Racing™ Performance turbochargers have the latest in compressor aero technology with quick-spooling, yet free-flowing turbines. Starting with 66mm inducer sizes and working up to 79mm, the SUM-2600 Series turbos are reliable and a great value. The SUM-2700 Series are true race turbos starting at 76mm and go up from there. T4, T6, and V-band turbine housings are available. These are specially designed, balanced, and precision assembled in North America for class leading racers. They feature 2618 billet forged compressor wheels that offer superior flow and dependability at high boost.
( 7 )
$1,199.99
—
$1,695.99
$999.99
—
$1,594.99
On Sale
Frostbite can chill your turbo project with one of their universal intercoolers. Their bar and plate design is most efficient and durable, while still offering affordability. These intercoolers are available in several of the most common sizes. Order the application suited to your needs. Features of frostbite universal intercoolers include: * All aluminum construction * Available in polished aluminum or black painted finish * Available in 2.5 in. inlet/outlet or 3 in. inlet/outlet applications * Universal mounting bungs welded-on * Slip-fit inlets and outlets * Air-to-air cooling
( 17 )
$325.95
$179.95
On Sale
Keep your turbocharged vehicle operating at its best with Edge accessory system turbo timers. These devices ensure that your engine continues to run after shutoff so that it can go through the cool-down period required to prevent premature turbo wear and failure. They require an Edge Accessory System cable, sold separately, to connect to the CS or CTS monitor. Features include: * Ensures that your engine keeps running after shutoff for a preset period of time or until a specific EGT is reached * Prolongs turbo life by making vehicle go through cool-down stage * Allows lubricating oil to properly circulate
( 2 )
$285.95
$158.95
On Sale
Replace your failure prone rubber hose, plastic pipe, and worm clamps with one of these APR charge pipe and hose kits. APR offers the charge pipe and hose kits as a comprehensive upgrade for the 2.0T EA888 Gen 4 engine that addresses each component between the turbocharger and intercooler, and from intercooler to throttle body. This system increases air flow through smooth an uninterrupted airflow paths, and provides increased performance, turbocharger sound, and reliability by upgrading each of the factory components. Kits do vary, and each kit is comprised of multiple components otherwise sold on their own, which in turn saves you time and money. Order the kit designed to fit your application needs. Charge hose features: * Direct replacement parts * Increases performance through smooth airflow paths and reduced boost leak points * Multi-Ply silicone hose construction resists swelling and tearing * Fluorosilicone interior hose surfaces for oil degradation resistance * Strong Clampco T-bolt clamps for a secure high-boost connection * EZ-Flow stepped interior lips for a smooth airflow path * Full 60mm setup * Black finish * Emissions friendly Charge pipe features: * Direct replacement parts * Increases performance through smooth airflow paths and reduced boost leak points * Strong aluminum pipes that resist cracking and melting like OEM components * Billet aluminum meth/sensor bung with NPT tap (TB inlet pipe) * Billet aluminum MAP sensor bungs (TB inlet pipe) * Removes the restrictive and failure prone throttle body inlet internals (TB inlet pipe) * No-slip bead rolled pipe ends * TIG-welded mounting brackets * Full 60mm setup * Satin black finish * Emissions friendly Turbo muffler pipe and hose features: * Direct replacement parts * Complete system replaces the factory turbo muffler and outlet hose * Increases outlet cross sectional area 66 percent by replacing both parts * Reduces outlet restriction * Increases performance through increased size, smooth airflow paths, and reduced boost leak points * Enhanced turbocharger sound * Faster turbocharger spool with better power delivery * CNC-machined billet aluminum muffler pipe * Integrated PCV vent path * Satin black finish on the turbo muffler pipe * Multi-ply silicone hose construction resists swelling and tearing * Fluorosilicone interior hose surfaces for oil degradation resistance * Strong Clampco T-bolt clamps for a secure high-boost connection * EZ-Flow stepped interior lips for a smooth airflow path * Full 60mm setup * Black finish on the hose * Emissions friendly
Not Yet Reviewed
$699.95
—
$799.95
$299.95
—
$324.95
On Sale
XDR blow-off valve kits integrate external blow-off valves allowing you to vent excess boost pressure into the atmosphere. Thus, eliminating compressor surge and strain on turbochargers and creating that popular turbo swoosh sound. You can even use the adjustable knob on top to either extend the swoosh sound, or make it a quick, short burst of air. Boost your performance and thrill the crowd with XDR blow-off valve kits. Features, parts, and specs may include: * Serviceable Delta Force synthetic filter (stops mud, dirt, and debris from entering exhaust port) * CNC-machined aluminum construction * All necessary hardware * Detailed instructions for easy at-home installation * Easy disassembly for cleaning and maintenance * Lifetime limited warranty
( 3 )
$155.95
—
$209.95
$85.95
—
$115.95
On Sale
APR carbon fiber intercooler ducts for the Porsche 992 3.0T dramatically lower intake air temperature (IAT) by increasing airflow through the ambient air path of the intercooler cores. In doing so, the engine makes more power and sustains power levels for longer—as IAT is kept away from the knock threshold of the engine and IAT-based power reduction safety routines of the factory ECU. Multiple back-to-back wide-open-throttle acceleration tests proved APR intercooler ducts reduced IAT as much as 9.6 degrees C (17.3 degrees F) or 15 percent better than stock! The APR intercooler ducts are made from carbon fiber, allowing the cooling ducts to be formed to the exact shape necessary to fit into the tight engine bay within the 992's rear-end. The vents allow for maximum flow through the system, while continuing to connect the system to the rest of the factory ducting. Everything simply slides into place with no extra hardware required. A gorgeous matte finish with a gloss APR logo adorns the system, giving it a motorsport-inspired feel, which is unfortunately tucked out of view with the rear bumper installed. Testing: The 911 must be tested on the street, rather than a dyno, to capture real world cooling data. This is especially true because of the rear engine design. In real world driving, air is forced through the cooling ducts differently than it is on a stationary dyno, even with excellent cooling fans. During development, APR engineers fully instrumented the engine to find the limitations of the factory hardware. It was quickly determined the factory intercoolers struggled with airflow through the ambient cooling paths. By redesigning the cooling ducts, more high-pressure ambient air could be forced through the system to maximize effectiveness of the coolers. To illustrate their importance, wide open throttle acceleration tests were conducted for roughly 11 seconds, both with stock cooling ducts and APR cooling ducts. IAT was measured post-intercooler with high-quality thermocouples. Ten back-to-back tests were conducted with each setup, and the results were averaged together. With the stock ducts in place, IAT rose to 66.2 degrees C (151.2 degrees F). This is above the factory knock threshold of 60 degrees C (140 degrees F) and is approaching the ECU power reduction limiter at 70 degrees C (158 degrees F). Once this IAT threshold is crossed, the ECU will begin aggressively reducing engine power to protect the engine. By simply swapping to the APR intercooler ducts, IAT dropped 15 percent, or 9.6 degrees C (17.3 degrees F), leveling off at 56.6 degrees C (133.9 degrees F). This is below the knock threshold and safely away from the power reduction threshold! APR Intercooler ducts are a simple and cost effective upgraded to the 992 3.0T and should be considered by any customer, at any stage of performance, looking to maximize the performance of their 911! Product features: * Improved intake air temperature (IAT) by 15 percent over stock * Organic matte carbon fiber design with gloss APR logo * Lightweight material and design * No extra hardware required * Plug-and-play upgrade * Retains factory intercooler post-housing ducting * Excellent performance per dollar upgrade for the Porsche 911 * Emissions compliant
Not Yet Reviewed
$699.95
$384.95
On Sale
Putting together the most advanced feature sets ever seen in boost controllers, AutoMeter has redefined the category. These AutoMeter electronic boost controllers are packaged in a familiar and easy-to-install 2 1/16 in. gauge housing. They offer some of the most powerful functions ever assembled for safely extracting the most performance possible from your forced-induction application, and the level of precision, response, and durability that racers have come to trust within the AutoMeter performance instrument range. Intuitive programming menus operated right through the controllers (no separate software or interface modules are required) make setup and use incredibly easy. Power is nothing without control. They are specifically designed for turbocharged gasoline engine combinations running up to 30 psi of boost pressure. AutoMeter electronic boost controllers feature: * High/low boost modes: pre-program and set two different configurable boost settings that can be switched between on-the-fly with the push of a button, perfect for performance track day cars and racing applications * Boost by rpm/boost by gear: integrating AutoMeter's most advanced digital tachometer circuit, your boost curve can be tuned precisely by 500 rpm increments to minimize wheel spin and put more power to the ground * One-touch gear capture: instantly capture each gear with the push of a button; drive normally in your chosen gear and hit the capture button * Peak boost recall: one-touch recall of the highest boost pressure achieved during a given time * Configurable warnings with overboost protection: easy-to-set parameters provide a full face flashing warning if boost pressure moves beyond your settings to quickly alert the driver. The warning doubles in speed if boost pressures exceed your programmed settings by 2 psi or more * Pro control output: using your programmed high and low boost settings, the AutoMeter boost controllers can automatically trigger external devices such as water methanol injection, intercooler sprayers, nitrous solenoids, or other devices that can be activated via relay * Pro control input: can also be controlled by external devices, any ground signal sent to the pro control input will immediately back boost levels down wastegate spring pressure * Display: highly versatile boost pressure reading units represented on the digital LED display can be selected via the user button interface * Data logger output: configurable scale 0-5v analog voltage output in either PSIA or PSIG allows for signal sharing/boost readings with other performance electronics, such as data acquisition systems or engine control units * Tach/speed signal diagnostic: onboard real-time diagnostics to verify the presence and correct operation of both of these inputs
Not Yet Reviewed
$506.99
—
$509.99
$456.29
—
$458.99
On Sale
APR intercooler hoses replace the factory rubber hoses and worm-gear clamps with high-quality multi-ply silicone hoses and strong Clampco T-bolt clamps. The interior of the hoses are smooth and lined with a Fluorosilicone material designed to resist oil degradation and extend component life. EZ-Flow stepped lips within the hoses allow for a smooth connection from hose to pipe for uninterrupted airflow. APR pays close attention to the airflow path and provide as few bends and tight radius turns as possible. Furthermore, the hose material adheres to its mating surface under high temperature to help create a stronger leak and slip free connection. This all results in a more reliable setup and increased performance through a smooth and strong uninterrupted airflow path. Features: * Direct replacement parts * Hoses are compatible with both OEM and upgraded APR charge pipes and intercoolers * Increases performance through smooth airflow paths and reduced boost leak points * Multi-ply silicone hose construction resists swelling and tearing * Fluorosilicone interior hose surfaces for oil degradation resistance * Strong Clampco T-bolt clamps for a secure high-boost connection * EZ-Flow stepped interior lips for a smooth airflow path * Full 60mm setup * Black finish * Emissions friendly
Not Yet Reviewed
$173.95
$49.95
On Sale
APR turbo outlet pipes replace the factory plastic pipe with a high-quality aluminum pipe that is a constant diameter within. APR pays close attention to the airflow paths and provide as few bends and tight radius turns as possible to maximize performance. Unlike the factory plastic pipes, APR's won't melt and crack under extreme conditions. This direct replacement piece additionally deletes the turbo muffler, which is integrated into the pipe on the Golf R/S3 and similar platform vehicles. The pipe features bead rolled connection points to resist hose slippage, and all mounting brackets are TIG-welded to the pipe for a strong connection. Finally, the pipe is finished in an attractive satin black finish. This all results in a more reliable setup and increased performance through a smooth and strong uninterrupted airflow path. Plus, these hoses are compatible with both OEM and upgraded APR charge hoses.
Not Yet Reviewed
$209.95
$99.95
On Sale
Dinan intercoolers elicit impressive power gains and a wider power band, along with astounding cooling characteristics—nearly guaranteeing that "heat soak" is a thing of the past. Heat robs power, and greater power gains are achieved with a larger high performance intercooler. Dinan intercoolers provide a major increase in face area, along with an equally impressive increase in volume—substantially reducing the pressure drop to 0.8 psi, as well as providing for more efficient heat exchange and more consistent output power. The core design allows two separate cores to be working in conjunction with one another at all times. This doubling of resources is directly responsible for the huge improvement in the delta from charge air temperature to ambient temperature. "Cool down" time is also reduced, enabling your car to produce full power under varying driving conditions such as stop and go traffic. This leaves the chances of being susceptible to heat soak nearly non-existent. The systems have been engineered to be as direct a replacement as possible to the stock units, requiring only minor modifications for a clean, factory-like installation. The increased thermal efficiency provided by the Dinan intercoolers will also enhance turbocharger reliability in addition to overall power.
Not Yet Reviewed
$999.95
$649.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
