Availability
Showing In Stock Items. Show All 69 Items.
On Sale
Nitrous Outlet FAST intake solenoid brackets are custom-made to fit the best mounting location in your engine compartment—for an easy and professional installation. Built from water-cut anodized aluminum to withstand engine vibration, the brackets hold your solenoids securely in place, while giving the system a custom finish. All hardware is included.
Not Yet Reviewed
$37.99
—
$85.99
$32.29
—
$73.09
On Sale
Nitrous Outlet FAST intake dual mount solenoid brackets are custom-made to place the solenoids to the right and left side of the throttle body, putting them in the most ideal location in the engine compartment. This design makes your nitrous install clean, easy, and professional. They are built strong enough to withstand engine vibration to keep your solenoids securely in place and are specifically designed for the FAST 102mm intake manifold running a dual stage system, providing you with the highest level of performance possible.
Not Yet Reviewed
$69.99
$59.49
On Sale
Nitrous Outlet solenoid mounting brackets can attach to any side of the intake to clear almost anything. They're specifically designed for carbureted or carbureted-style EFI intakes with a 4150 flange. The brackets are built strong enough to withstand engine vibration, keeping your solenoids securely in place—while giving your system a custom, water-cut anodized aluminum show-quality finish.
( 2 )
$55.99
—
$71.99
$47.59
—
$61.19
On Sale
For higher horsepower levels, proper nitrous flow into the airstream is critical for even cylinder to cylinder distribution. Holley Hi-Ram nitrous spacer plate systems are equipped with nitrous and fuel discharge ports that completely saturate the air intake charge with the best atomized mixture possible. The spacer plates are available in single and dual stage kits, complete with everything you need to spray up to 300 hp. (With additional jetting, the single stage can spray up to 400 hp, and the dual stage can spray up to 800 hp.) They include all electrical, hardware, gasket, brackets, and jetting for 50-100-150-200-250-300 hp.
Not Yet Reviewed
$2,032.99
—
$3,762.99
$1,728.04
—
$3,198.54
On Sale
Nitrous Outlet MSD Atomic Airforce solenoid mounting brackets are vehicle-specific brackets custom-made to fit the most ideal solenoid mounting location in the engine compartment, making install easy and professional. These solenoid brackets are built strong enough to withstand engine vibration to keep your solenoids securely in place, while giving your system a custom finish. Nitrous Outlet MSD Atomic Airforce solenoid mounting brackets are specifically designed for any vehicle using the MSD Atomic Airforce intake.
Not Yet Reviewed
$56.99
$48.44
On Sale
Nitrous Outlet Holley Hi-Ram all-in-one solenoid mounting brackets are designed to mount directly to your Holley Hi-Ram. These brackets are built strong enough to withstand engine vibration to keep your solenoids securely in place, while giving your system a custom finish. Nitrous Outlet Holley Hi-Ram all-in-one solenoid mounting brackets are capable of mounting both solenoids to the front or back of your intake, giving you the choice you want.
Not Yet Reviewed
$52.99
$45.04
On Sale
Nitrous Outlet MSD Atomic AirForce nitrous oxide plate systems feature pre-bent hard lines constructed of 3/16 in. stainless steel. They're designed to work with Nitrous Outlet bottom exit solenoids and intake-specific solenoid brackets—to create the cleanest looking install possible. These nitrous oxide plate systems are made specifically for the MSD Atomic AirForce intake with a 102mm plate and Nitrous Outlet's LS intake-specific solenoid brackets.
Not Yet Reviewed
$1,015.99
—
$2,454.99
$863.59
—
$2,086.74
On Sale
Nitrous Outlet solenoid center-rear mounting brackets are specifically designed for carbureted or carbureted-style EFI intakes with a 4150 flange. These brackets hold two fuel and two nitrous solenoids in the rear center of the intake, keeping the solenoids out of the way of fuel logs or anything else that may be on the front side of the intake. Nitrous Outlet solenoid center-rear mounting brackets are designed to place the solenoids slightly lower than the intake inlet, and are good for use with the Nitrous Outlet dual stage systems and dual nozzle systems.
( 1 )
$60.99
—
$61.99
$51.84
—
$52.69
On Sale
Nitrous Outlet X-Series nitrous oxide systems are the perfect solution for racers on a budget. They're made of the same high-quality parts as other Nitrous Outlet systems, and are available in universal and application-specific kits. Choose your nitrous delivery style, wet or dry, desired horsepower increase, jet sizes, and other options. X-Series nitrous oxide systems include everything you'll need for a clean installation and enhanced performance at the track!
( 26 )
$563.99
—
$887.99
$479.39
—
$754.79
On Sale
Nitrous Outlet nitrous oxide plate systems come out of the box ready to deliver superior atomization. They spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max flow 400 hp * 400+ hp solenoids * Anodized black aluminum plate and bottle (if included) * Wide-open throttle activation switch * Hardware, electric, and jetting included * E85 compatible with different jetting * Jetting included for 50 to 200 hp
( 3 )
$853.99
—
$3,221.99
$725.89
—
$2,738.69
On Sale
Nitrous Outlet nitrous oxide hardline plate systems arrive out of the box ready to deliver superior atomization. These systems come with a hardline from the solenoids. Like the softline systems, they spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max-flow 400 hp billet aluminum plate * Wide-open throttle activation switch * Black powdercoated aluminum or steel bottle with bracket (included in some packages) * Hardware, hardlines, electric, and jetting included * E85-compatible with different jetting * Jetting included for 50-100-150-200 hp
Not Yet Reviewed
$1,040.99
—
$2,474.99
$884.84
—
$2,103.74
On Sale
Nitrous Outlet vehicle-specific solenoid mounting brackets are custom-made to place the solenoid in the right location in your engine compartment—for a clean, easy, and professional nitrous install. They're built strong enough to withstand engine vibration to keep your solenoids securely in place, while giving your system a custom-anodized, show-quality finish. The brackets are available in a variety of styles.
Not Yet Reviewed
$43.99
—
$94.99
$37.39
—
$80.74
On Sale
If you think the torque of that monster diesel is something to brag about, then you should feel it with the extra power of NOS diesel nitrous kits. These kits work with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring, and complete instructions. Give your ride the kick it needs with NOS diesel nitrous kits. Features: * Specially designed for diesel engines, including Duramax, Cummins, and Power Stroke * Adjustable horsepower settings * Gains up to 75 hp on stock applications * Upgrade your fuel system or computer for additional 60 to 150 hp * Higher horsepower gain with computer modifications * Available with or without mini 2-stage controller * Choice of 10 or 15 lb. blue bottle
Not Yet Reviewed
$1,299.95
$714.95
On Sale
If you're big into performance, we can't stress enough the major importance of jetting your nitrous system. Many racers casually assume that a jet is a jet--that all are created equally. However, Nitrous Outlet suggests that precision manufacturing and the jet design can make a huge difference in performance. These flare jet packs are the most common type. They're offered in many configurations to accommodate virtually every nitrous system; plus, each jet is stamped with the orifice size for easy identification and selection. To meet your power and tuning needs, use Nitrous Outlet jets!
( 2 )
$163.99
$139.39
On Sale
NOS Cheater nitrous oxide systems are designed with the serious racer in mind. They feature larger nitrous and fuel solenoids than the Powershot systems and can be adjusted in a matter of seconds to add an additional 150 to 250 hp, simply by changing fuel and nitrous jets. They use a thin, 1/2 in. injector plate that fits between your carburetor and intake. Highly accurate spray bars within the plate simultaneously inject both nitrous and fuel into the manifold, creating a smooth rush of extra power on demand. Kits are also available without the bottle or injector plate. They are not recommended for intake manifolds with a separate inlet for each carburetor throttle bore, except for 3 x 2-barrel setups. Racing fuel is recommended. Most kits come complete with: * Unfilled nitrous bottle * Cheater nitrous and fuel solenoids * Injector plate * Filters * Fittings * Four stages of jets * Switches * Aircraft-quality stainless steel braided hose * All other necessary hardware for a complete installation
( 11 )
$1,099.95
$988.95
On Sale
Nitrous Outlet 4150 Stinger plate conversion kits come out of the box with everything you need to spray up to 600 hp. They feature a large, unique cone shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat, and they have 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4150 Stinger plate conversion kits include the 2nd generation 4150 Stinger plate, gasket, and 50-600 hp jetting. Overview: * 600 hp max flow * Single-entry * 4150 flange * 360 degree discharge pattern * Anodized billet aluminum stinger plate * Bracket, gasket, jetting, and hardware * E85 compatible with different jetting
Not Yet Reviewed
$960.99
—
$1,003.99
$816.84
—
$853.39
On Sale
What's the buzz about at the track? Nitrous Outlet 4500 Hornet race dual-entry plate systems have larger "stingers" for more precise atomization! The larger conical cone with 15 discharge ports for nitrous and 15 for fuel saturates the air intake charge as it enters the intake plenum for even distribution. Then there's the dual-entry ... yes, two inlets for nitrous and fuel, so you can spray huge shots of nitrous, or have two stages. The Hornet plates are CNC-machined from 6061 billet aluminum, and feature a black anodized body with a red anodized stinger. They're engraved with the Nitrous Outlet logo and come out of the box with everything you need to spray up to 700 hp. Models are available with or without nitrous bottles and brackets. The word's out: Nitrous Outlet 4500 Hornet racing plate systems inject stinging performance into your system!
Not Yet Reviewed
$2,245.99
—
$3,377.99
$1,909.09
—
$2,871.29
On Sale
Nitrous Outlet plumbers kits upgrade your soft lines. These kits have plenty of hard line and hardware to convert your system to a clean, professional-looking setup. They can be bent tightly to stay close to your intake, and out of the way of moving parts. Each kit includes 3/16 in. hard line, black and red -3 AN B-nuts, and -3 AN sleeves. Whether you have a 4, 6, 8, or 10-cylinder, it's time to get the job done right with these Nitrous Outlet plumbers kits.
( 2 )
$115.99
—
$1,380.99
$98.59
—
$1,173.84
On Sale
NOS Powershot nitrous oxide systems are an excellent way to increase the horsepower of your engine. They use a thin, 1/2 in. injector plate that fits between your intake and carburetor. Highly accurate spray bars within the plate simultaneously inject both nitrous and fuel into the manifold, creating a smooth rush of extra power on demand. They're easy to install and are factory-preset to provide 125 hp for V8 applications or 90 hp for V6s. Kits come complete with: * Nitrous and fuel solenoids * Fuel filters * 12 ft. of -4 AN stainless braided supply line * Switches * Wiring * All necessary hardware
( 4 )
$649.95
—
$799.95
$583.95
—
$718.95
On Sale
If you're looking to upgrade your plate or add a second stage, Nitrous Outlet nitrous stinger plates are available by themselves or in a conversion package. The new Stinger has a larger conical cone shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat and is capable of delivering up to 600 hp of fuel and nitrous. They have 15 discharge ports for nitrous and 15 for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. These systems come out of the box with everything you need.
( 3 )
$398.99
—
$461.99
$339.14
—
$392.69
On Sale
Nitrous Outlet dual-stage nitrous plate conversion kits will work with any wet system and offer precision atomization. They're dual-stage plates that can spray two different horsepower ratings without the need for another nozzle, plate, or spray bar. These injection plates have six specially designed nitrous and fuel discharge ports that completely saturate the air intake charge with the best atomized mixture possible. That results in proper distribution into the air stream and supports higher horsepower levels. Nitrous Outlet plates are machined from billet aluminum and feature a black anodized finish with CNC engraving. They are all flow-tested to ensure proper function—and include necessary hardware, gaskets, and jetting to convert a single nozzle system to a plate system.
Not Yet Reviewed
$340.99
—
$418.99
$289.84
—
$356.14
On Sale
Nitrous Outlet offset solenoid mounting brackets are specifically designed for carbureted or carbureted-style EFI intakes with a 4500 flange. Two solenoids mount in the front and rear of the intake offset on either side. They are built strong enough to withstand engine vibration to keep your solenoids securely in place, while giving your system a custom-anodized, show-quality finish. Nitrous Outlet offset solenoid mounting brackets are designed to place the solenoids slightly lower than the intake inlet and are good for use with the Nitrous Outlet Puck, spraybar, and single-nozzle systems.
( 2 )
$62.99
—
$72.99
$53.54
—
$62.04
On Sale
Nitrous Outlet Stinger Plate nitrous oxide systems feature a second generation Stinger plate designed to work with either 4150 or 4500 flanged carbureted-style intake manifolds. The new billet aluminum Stinger plate has a larger conical cone than the previous version and is based off of the same technology as the Nitrous Outlet Nitrous Puck, enabling them to delivering up to 600 hp with proper jetting. The plate features 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet Stinger Plate nitrous oxide systems include nitrous and fuel solenoids, solenoid brackets, a main feed line, relay, harness, jetting, hardware, and wiring.
Not Yet Reviewed
$1,294.99
—
$2,777.99
$1,100.74
—
$2,361.29
On Sale
Nitrous Oxide Systems Pro Shot Fogger custom nitrous plumbing kits include nozzles, fuel solenoids, nitrous solenoids, steel tubing, and 300 hp jets. They are offered for those needing only the intake manifold plumbing components for a direct port injection kit.
Not Yet Reviewed
$1,149.95
$1,033.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
