Availability
Showing In Stock Items. Show All 24 Items.
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 56 )
$204.99
—
$379.99
$199.99
—
$339.99
On Sale
Bolt a carburetor onto your LS engine using Holley LS mid-rise carbureted intake manifolds. These intake manifolds work on all GM LS, Gen III, or Gen IV engines equipped with rectangular or cathedral port cylinder heads. Available in a single or dual plane design, these manifolds use an O-ring cylinder head mounting flange to provide an OEM seal and make installation a snap. You'll also receive mounting bolts, washers, and pipe plugs for the manifold vacuum and MAP sensor ports.
( 46 )
$415.95
—
$573.95
$302.95
—
$470.95
On Sale
Holley EFI LS single plane mid-rise intake manifolds are great for your higher horsepower engine. Featuring cast aluminum construction, these manifolds are also great for centrifugal blower, turbocharged, or NOS mild power adder applications. The efficient casting design is lightweight--11.5 lbs.--with consistent wall thickness and strong mounting flanges. The optimized runner layout and constant cross sectional area offer a broad torque curve, with the best vehicle performance from 2,500 to 7,000 rpm. The mid-rise design offers minimum carb mounting flange height--without sacrificing power--and is another plus for vehicles with minimum hood modifications. Holley EFI LS single plane mid-rise intake manifolds include zinc-plated hex head cap mounting bolts and washers, pipe plugs to block manifold vacuum and MAP sensor ports, and Viton® O-ring cylinder head mounting flange gaskets for an OEM-style seal.
( 9 )
$479.95
—
$549.95
$430.95
—
$493.95
On Sale
Holley EFI LT1 Gen V Hi-Ram intake manifolds provide the ultimate performance with GM direct-injected Gen V 6.2L LT1 engines. The modular design allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper and cross-sectional area to perform in a wide variety of engine configurations. When you look for the pinnacle of performance, price, and quality, look to Holley Hi-Ram intake manifolds for your LT1 application. Features include: * Available with injector bosses on the intake runners that provide increased performance potential by using additional injectors and the factory direct injection * Removable top * Large plenum volume * Intakes with injector ports include fuel rails with dual mounting * Fuel rails are anodized, laser-etched, and machined for -8 AN O-ring fittings at each end * Rear of plenum machined for MAP sensor and three vacuum ports * Head flange has clearance for fuel supply to a high-pressure pump * Increased runner wall thickness for custom porting at the plenum to runner entry on each runner * O-ring seals at cylinder heads and plenum top * Easy assembly with top-mounted screws on plenum top (except front two screws) * Several top options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or blank flange for custom throttle bodies * 3,500 to 8,000-plus rpm power band
( 2 )
$949.95
—
$1,299.95
$853.95
—
$1,168.95
On Sale
Holley LS split design carbureted intake manifolds are single-plane racing units designed with performance in mind. They feature a race-bred, 2-piece split feature that was previously only found on the most expensive race intakes. The manifolds will fit GM LS Gen III engines with cathedral port heads—and are intended for 4150-style square bore flanged carburetors or throttle body EFI. The LS Race single-plane intake manifold was designed for high performance/racing engine applications, 5.3 to 6.2+ liter displacement—and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the rpm spectrum, while providing maximum performance up to 7,000 rpm. Features include: * Maximum performance race design with hood clearance consideration * Lighter than other split race intakes * Split feature allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap * Shoulder bolt locators and O-ring seal make reassembly simple and precise * 33 to 50 percent the price of other split race intakes * Vacuum port options: Two 1/8 in., one 1/4 in., and one 3/8 in. NPT ports at the carb flange
( 6 )
$649.95
—
$725.95
$583.95
—
$652.95
On Sale
FiTech Nitro-Port Series cast intake manifolds are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. These manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
Not Yet Reviewed
$715.00
$572.00
On Sale
Holley Pro-Jection intake manifolds are designed for Holley 2-barrel Pro-Jection systems. The high-rise, dual-plane manifolds are perfect for powerband ranges from idle to 6,000 rpm. With these manifolds, there is no need for manifold-to-TBI adapters. To make installation easy Holley utilizes late model alternator and A/C bracket mounting bosses and include provisions for an EGR valve and vacuum taps off of the runners. Power is made easy with Holley Pro-Jection intake manifolds.
( 6 )
$433.95
—
$504.95
$328.95
—
$389.95
On Sale
FiTech Nitro-Port cast LS3 750 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.
Not Yet Reviewed
$1,200.00
$960.00
On Sale
Edelbrock introduces the all-new XTS manifold for the Ford 7.3L Godzilla engine. These intake manifolds feature shorter-than-stock tapered runners tuned for high-RPM gains in engine swap applications. Finished in a highly attractive black powdercoat, the XTS is designed of lightweight, durable sheetmetal. The flanges are of billet construction for strength and consistent sealing with the heads. A horizontal throttle-body mount solves one of the most common swap fitment issues of intake air routing. All standard vacuum takeoff ports are found on the rear of the manifold, and they come complete with the mounting and vacuum takeoff hardware. Additional notes: * Horizontal throttle body positioning makes inlet plumbing engine swap vehicles very easy * Short tapered runners provide significant high RPM gains, especially when matched with a Comp Cams Stage 3 Godzilla camshaft * Two 1/8 and two 1/4 NPT bosses for extra vacuum takeoff points * Team up the XTS manifold (P/N 7483) with a FAST 102mm throttle body (P/N 54106) and COMP Stage 3 camshaft (P/N 405-205-17) to create a 637 hp beast ready to swap into your favorite ride
Not Yet Reviewed
$1,045.95
$836.76
On Sale
FiTech Nitro-Port cast LS1 750 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
Not Yet Reviewed
$1,200.00
$960.00
On Sale
FiTech Nitro-Port cast LS3 500 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.
Not Yet Reviewed
$1,200.00
$960.00
On Sale
FiTech Nitro-Port cast LS3 1000 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.
Not Yet Reviewed
$1,200.00
$960.00
On Sale
FiTech Nitro-Port cast LS1 500 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
Not Yet Reviewed
$1,200.00
$960.00
On Sale
FiTech Nitro-Port cast LS1 1000 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
Not Yet Reviewed
$1,200.00
$960.00
On Sale
Weiand Action Plus intake manifolds are designed for use as stock replacements, with improved power and torque characteristics. They're 180 degree, dual plane types, with a carburetor flange that'll accept either stock or aftermarket performance carburetors. Their effective rpm range runs from idle to 6,000 rpm. With their high-flow runner design and ability to produce increased power with little modification, it's no wonder these manifolds are so popular.
( 65 )
$412.95
$268.95
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 29 )
$449.99
—
$469.99
$349.99
—
$369.99
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$849.95
—
$949.95
$467.95
—
$853.95
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$571.95
$457.56
On Sale
Developed with performance in mind, Holley EFI LS single plane split-design race intake manifolds feature a race bred, 2-piece split design that was previously found only on the most expensive race intakes. These manifolds will fit GM LS Gen III engines with cathedral port heads for high performance/racing engine applications with 5.3 to 6.2 liter displacement and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. The single-plane design provides optimal performance across the rpm spectrum, while the split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, makes custom porting and matching a snap. Shoulder bolt locators and an O-ring seal makes reassembly simple and precise.
( 4 )
$725.95
—
$799.95
$652.95
—
$718.95
On Sale
Our Summit Racing™ high performance intake combos are a great way to build horsepower and save money doing it. These systems are available in single or dual 4-barrel styles and you can take your pick of a variety of intakes. We also included carb studs and all of the intake gaskets you'll need to finish the job.
Not Yet Reviewed
$829.86
—
$875.87
$780.86
—
$821.87
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$824.87
—
$1,157.51
$775.87
—
$1,050.51
On Sale
Summit Racing™ tunnel ram and carburetor Pro Packs are made for horsepower, pure and simple. For folks with smaller cubic inch engines, we offer Weiand tunnel ram intakes with 450 cfm Holleys that'll deliver the horsepower you crave without saddling your rig with too much carb. For big-motor fans, we have the combo with 600 cfm Holleys. We include the linkage, too! Choose the cylinder head style application needed for your specific vehicle, and enjoy the enhanced performance of a Summit™ Pro Pack!
( 6 )
$1,636.84
—
$1,686.84
$1,538.84
—
$1,588.84
On Sale
Summit Racing™ induction kit Pro Packs have a GM Performance Parts intake manifold designed to produce an excellent balance of broad torque, upper-rpm horsepower, and throttle response for the street. To top them off, we've added a Holley Street Avenger 770 cfm carburetor, a 14 in. chrome steel Summit Racing™ air cleaner, zinc plated Summit Racing™ carb studs, a set of ARP black-oxide coated chromoly intake manifold bolts, and a Fel-Pro Printoseal intake manifold gasket set.
Not Yet Reviewed
$1,328.36
$1,257.36
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
