Availability
Showing In Stock Items. Show All 25 Items.
On Sale
Nitrous Outlet X-Series nitrous oxide systems are the perfect solution for racers on a budget. They're made of the same high-quality parts as other Nitrous Outlet systems, and are available in universal and application-specific kits. Choose your nitrous delivery style, wet or dry, desired horsepower increase, jet sizes, and other options. X-Series nitrous oxide systems include everything you'll need for a clean installation and enhanced performance at the track!
( 26 )
$563.99
$479.39
On Sale
Aeromotive has a regulator that's ideal for switching to a carbureted fuel system. Aeromotive EFI to carb conversion fuel pressure regulators work with OE return-style EFI systems. They provide an adjustable bypass pressure of 8-16 psi and have adjustable regulated pressure to the carb from 5-9 psi. These regulators have a 3/8 in. return, and inlet and outlet ports for regulated flow. Aeromotive EFI to carb conversion fuel pressure regulators combine new school and old school.
( 17 )
$390.95
$351.86
On Sale
Holley Sniper HyperSpark plug-and-play main wiring harnesses were designed to make upgrading your ignition on a Sniper EFI-equipped engine easy. When this harness is installed concurrently with a new Sniper EFI system, the combination creates the easiest to install EFI conversion on the market—only four flying lead connections required! Key features: * Harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power * Pre-terminated connectors and a built in 40A relay provides power to all of the components within the system * With the included Sniper EFI main harness, you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay * Just route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in
( 2 )
$320.95
$288.85
On Sale
Holley Dominator billet fuel pumps feature a patent-pending twin-pump design. It allows you to use one pump for cruising and both pumps when you activate the nitrous switch or start building boost. By staging the second pump, you eliminate the unnecessary recirculation and heating of extra fuel, which can lead to poor performance and hot fuel issues. They can also be wired for full-time duty to get the maximum performance and are proven with an 18 V compatibility at pressures of up to 80 psi. At only 5.1 lbs., they weigh half a pound less than other 1,000 hp pumps, and yet they have twice the features. Features include: * Billet aluminum construction with anodized finish * -10 AN O-ring inlet/outlet for high flow and superior sealing * Excellent for use with carburetor or EFI applications * Compact for easy installation on frame rails or other tight spaces * Proven durability beyond 3,000 hours in gasoline or diesel fuels * Fully sealed, can be submersed if necessary
( 13 )
$549.95
$493.95
On Sale
Aeromotive VaporWorx ReturnX return-type PWM controllers have everything needed to provide a standalone fuel pump speed control system. Available for single or dual pump, naturally aspirated or supercharged applications, no switches, relays, or Hobb's switches are needed when using these ReturnX systems. Controllers have primary and secondary output with the primary providing sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. This leader/follower arrangement delivers a smooth ramp-up in pump speed until both pumps are at full output. For carbureted and EFI applications, simply attach the supplied standalone MAP sensor hose to a manifold vacuum source (naturally aspirated) or past the supercharger/turbocharger and make at-idle controller adjustments--the VaporWorx controller will do the rest. Select the single or dual naturally aspirated or supercharged version needed for your setup. Key features: * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent * Standalone MAP-based fuel pump speed control * Carburetor and EFI capability Benefits: * Everything needed electrically to drive the fuel pump(s) * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 40 to 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating range -- Can be used with voltage boosters -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition
( 1 )
$502.90
$452.61
On Sale
Pop your bottle for power—from your driver's seat—with Nitrous Outlet remote nitrous bottle openers. These openers are switch activated, feature thumb-twist screws to easily remove the opener if needed, and include all wiring and hardware. They were designed to work with Nitrous Outlet bottles, but are compatible with most other brand bottle valves, as well. Getting out of the driver's seat to open the bottle can be a hassle. Instead, open and close your nitrous bottle with a simple flick of your Nitrous Outlet remote openers.
( 2 )
$304.99
—
$461.99
$259.24
—
$392.69
On Sale
Nitrous Outlet ProMax Dual-Channel Progressive Controllers incorporate the system activation and safety functions of the WinMax—but adds numerous tuning and traction features that help you get the most out of your nitrous system. With the ProMax you can set rpm, time-based, or boost referencing progressive ramps for multiple stages while integrating wideband inputs. Additional features and benefits include: * Inputs for vehicle speed, trans-brake, MAP sensor, two wideband oxygen sensors, two nitrous pressure sensors, and one fuel pressure sensor * Two built-in 70 amp solenoid drivers can control two stages independently, or can be configured for closed-loop fuel control based on wideband oxygen input—with nitrous on one output and fuel on the second output * Progressive stage controls allow: adjustable frequency output of 10-30 Hz (by 1 Hz) for driving solenoids * Ability to be configured to vary solenoid duty cycle as a function of time, throttle percent (TPS), engine rpm, vehicle speed, manifold pressure (MAP) * Ability to set response of stage based on secondary arm switch input (arm/disarm) * Resume and restart feature option for controller—to resume an interrupted time-based ramp or start over based on TPS going out of range * Built-in rpm window switch with gear lockout feature * TPS or WOT switch activation * Data logging capable * Updateable Firmware * CAN Bus output * Two ignition retard outputs * Simple USB connection to PC/laptop * Optional 4.3 in. full touch screen display allows viewing of real-time data * Saved data logs can only be viewed on PC/laptop * Can save up to five different tuneups * Controller can be programmed via PC/laptop or optional display
Not Yet Reviewed
$600.99
$510.84
On Sale
Earl's Performance Dominator in-line billet fuel pumps are for those of you who are in need of a fuel pump that can support serious horsepower. Have a nitrous system, turbo or supercharger? No problem! These fuel pumps feature a twin-pump design that allows you to use one pump for cruising and both pumps when you activate your nitrous switch or start building boost. The second pump allows you to eliminate the unnecessary recirculating and heating of fuel that can lead to poor performance and hot fuel issues. Earl's Performance Dominator in-line billet fuel pumps also have an added benefit for hard core enthusiasts that run events like the Hot Rod Power Tour or the Baja 1000; that extra pump brings you peace of mind that you'll always finish what you've started. Features include: * Billet aluminum construction for durability and good looks * -10 AN O-ring inlet/outlet for high flow and superior sealing * Suitable for use with carbureted or EFI applications * May be fully submerged in-tank for custom applications, space savings, and reduced plumbing * Compatible with 12 V to 18.5 V systems at pressures up to 80 psi for street or race use * For hardcore race use, both pumps can be wired for full-time duty * Only 7.66 in. long x 5 in. wide x 2.5 in. tall for easy installation on frame rails or other tight areas * Patent pending dual-pump technology * Proven durability beyond 3,000 hours * Weighs only 5.1 lbs.--half a pound less than competitive 1000+ hp pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.
( 1 )
$626.95
—
$699.95
$344.95
—
$384.95
On Sale
Aeromotive VaporWorx Ally PWM fuel pump controller kits allow a second pump to be added to an OEM fuel system control module without causing overloading of the stock FSCM. They are compatible for use with positive trigger OEM fuel system control modules when using an aftermarket standalone fuel pump. For clarity, there are many names for the modern OEM fuel pump driver/fuel computer, but all basically do the same thing; communicate with the ECM to drive the fuel pumps at the speed needed to provide the requested fuel pressure. Most aftermarket ECMs do not have this capability and unfortunately, many OEM fuel system control modules (FSCM) can handle one high-power pump, but not two or more. So, in the search for more power, and to keep the FSCM working, it needs help. That's where VaporWorx Ally PWM fuel pump controller kits come in. These Ally kits allow positive pulse FSCMs to control the primary pump, while the VaporWorx Ally Auto-On controller "piggybacks" and takes care of the other pump(s). The controllers do not turn on the other pumps until approximately 3 to 4psi of boost by using the engine MAP sensor or a VaporWorx standalone MAP sensor as the turn-on trigger. The Ally solution provides sufficient power for all fuel pumps while maintaining the FSCM full CAN feedback and diagnostics, and all pumps will effectively be under the control of the FSCM. Kits are available for naturally aspirated and supercharged applications. Select the kit best suited to your setup. Features: * Everything needed electrically to drive additional fuel pumps -- No hard-to-get connectors, multiple fuses, Hobb's switches, etc. * A 2/3 reduction in power to the fuel pump during idle and cruise vs. traditional systems means long OEM pump life expectancy * 50-amp minimum continuous power rating in a compact controller package * Progressive 2/3 pump ramping strategy lowers the load on the FSCM to reduce MIL codes * Soft-start feature to reduce initial pump-on pressure spikes * Can use either the engine MAP sensor or a VaporWorx standalone MAP sensor * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * Cross-linked polyethylene wiring * UL94 rated components used throughout * Allows all the OEM ECM priming and safety systems to remain functional * Can be used with one or two extra/auxiliary pumps * 10 to 22 V operating capacity
Not Yet Reviewed
$577.15
$519.44
On Sale
Nitrous Outlet X-Series Core EFI plumbing kits include everything you need for a single-nozzle nitrous kit from the main feed line forward. This system is ideal to replace the main components of an existing system or to fill in the gaps if you're trying to piece together a system. It's capable of spraying up to 200 hp! Core Systems come with just the basics; they do not include bottle, bottle brackets, WOT switch, fuel rail adapter, hardware, or wiring. Plumbing kits include: * 90 degree wet nitrous nozzle and fittings * 192 in. 4 AN hose main nitrous feed line * 2 x 24 in. 3 AN hose * 18 in. 4 AN hose * .155 in. fuel solenoid * .078 in. nitrous solenoid * Nitrous and Fuel Jet Pack with one each of the following jets: .014, .016, .017, .018, .019, .023, .024, .028, .030, .031, .035, .036, .041, .052, .062, .078. This jet pack allows for horsepower settings 35, 50, 75, 100, 150, and 200 hp with 45-55 psi fuel pressure * The Core system can be used to upgrade your existing nitrous components, allowing you to retain your existing bottle
( 1 )
$423.99
$360.39
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$399.95
$259.95
On Sale
Nitrous Outlet dry-to-wet conversion kits are neat and simple packages that include the parts you need to make the switch and eliminate any guesswork on your part. The conversion is reliable, effective, and easy to use. Each kit includes a 400 hp fuel solenoid, 250 hp 1/8 in. NPT wet nozzle, nozzle adapter, hoses, hardware, solenoid bracket, and jetting for 35 to 200 hp. It's easy to change with these all-in-one Nitrous Outlet dry-to-wet conversion kits.
( 1 )
$340.99
$289.84
On Sale
Nitrous Outlet diesel nitrous single nozzle dry systems are available for both gasoline and diesel fuel setups. Most feature a boost activation switch that you can set between 1.5 and 20 lbs. This will allow you to control when the nitrous system is activated and spray up to 500 hp with additional jetting. These kits include everything you need to safely and easily install a dry nitrous system on your vehicle, such as hardware, electrical, jetting solenoid, lines, and more. They come with jetting for 35-50-75-100-150-200 hp.
Not Yet Reviewed
$588.99
$500.64
On Sale
Nitrous Outlet dual nozzle nitrous systems flow with power! Out of the box, these systems are ready to safely add big horsepower to your vehicle—but with additional jetting the dual-stage, dual-nozzle systems can add even more. These complete universal systems include everything you need for an easy, clean install. You have a choice of bottle capacities or no bottle with your kits. All include dry nitrous nozzles, nitrous solenoids, hardware, wiring, wide open throttle switch, solenoid brackets, main feed line, and dual nozzle jetting for 35-50-75-100-150-200 hp.
Not Yet Reviewed
$636.99
$541.44
On Sale
Nitrous Outlet nitrous distribution ring systems are ready for performance right out of the box! They include everything you need to spray up to 200 hp, but can spray up to 500 hp with additional jetting. These universal dry systems are available with two sizes of distribution rings to fit your small or large cone-style filters—and will require additional fuel to be added through the injectors using engine management software. Your complete Nitrous Outlet nitrous distribution ring system will come with a ring, a .122 nitrous solenoid, hardware, wiring, wide-open throttle switch, and brackets.
Not Yet Reviewed
$592.99
—
$593.99
$504.04
—
$504.89
On Sale
Nitrous Outlet nitrous oxide plate systems come out of the box ready to deliver superior atomization. They spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max flow 400 hp * 400+ hp solenoids * Anodized black aluminum plate and bottle (if included) * Wide-open throttle activation switch * Hardware, electric, and jetting included * E85 compatible with different jetting * Jetting included for 50 to 200 hp
( 3 )
$594.99
$505.74
On Sale
Aeromotive VaporWorx Ally Returnless PWM (Pulse Width Modulation) electronics kits for the KPM1500 fuel pump include the necessary parts to modify the KPM1500 (not included) to make it work properly for FSCM (fuel system control module)-equipped vehicles and aftermarket ECM/FSCM systems. The weakness of the OEM FSCM is power capability--they can drive one high-power pump, but not two. That's where VaporWorx Ally PWM kits come in. They provide the components needed to drive the second (KPM1500) fuel pump electrically while the FSCM handles the primary. Using pulse width modulation to slow down the pumps is very effective in keeping fuel temperatures down and relieving the electrical system of excessive load. Ally controllers help reduce the amount of power that the FSCM has at higher fuel demand, so at higher duty cycles the VaporWorx controller will start to out-run the FSCM and take more of the pumping power load. These Aeromotive VaporWorx kits are intended to be used as an Ally, or piggyback, system to help the OEM FSCM. No additional relays, Hobb's switches, etc. are needed.
Not Yet Reviewed
$577.15
$519.44
On Sale
NOS Cheater to Dual Shot Cheater upgrade kits allow you to convert your single stage system into a powerful dual stage setup. Kits include: * Two solenoids * Hard tube line * Stainless steel braided hose * Wiring * Inline nitrous filter * New push-button switch * All necessary mounting hardware
Not Yet Reviewed
$523.95
$288.95
On Sale
AEM Electronics water/methanol injection kits allow you to increase boost pressure and advance timing without having to run higher-octane fuel resulting in significant horsepower gains.
( 35 )
$565.95
$508.95
On Sale
Whether you're cruising or running wide-open, Aeromotive billet electric fuel pump controllers are able to sense engine rpms and deliver the correct voltage to the fuel pump(s). An adjustable knob lets you calibrate the desired rpm level, while an LED indicator confirms ignition hookup, verifies the energizing of the manual override circuit, and confirms the circuit is providing full voltage to the pump(s). The fuel pump controller housings are constructed from 6061-T651 billet aluminum and have an anodized finish for great looks and protection. Their low operating temperature allows mounting in any location, and they come complete with everything needed for installation.
( 18 )
$525.15
$472.64
On Sale
Nitrous Outlet heated nitrous bottle brackets can help keep nitrous pressure at optimum levels for a consistent flow, pass after pass. They offer several options, from bottle brackets only to kits with accessories, single or dual brackets, and vertical or horizontal styles. Also, you can choose simple brackets with quick-release clamps and aluminum cradles, or show-stopping machined 6061 billet aluminum brackets with quick-release knobs and rubber insulators. Safely warm your bottle for performance with one of Nitrous Outlet's heated nitrous bottle brackets.
( 3 )
$326.99
—
$327.99
$277.94
—
$278.79
On Sale
Power up your motorcycle or ATV with Nitrous Outlet powersports nitrous nozzle systems. These single stage systems include all of the necessary components needed to install a wet or dry direct port nitrous system on your ride with your choice of an aluminum nozzle, aluminum nozzle with a jam nut, or a stainless steel nozzle. Kits are available with or without aluminum nitrous bottles. Available for single, twin, 3-, and 4-cylinder engines, these Nitrous Outlet Powersports nitrous nozzle systems are designed to be high flowing for instant nitrous delivery and include the highest quality parts available.
Not Yet Reviewed
$481.99
—
$600.99
$409.69
—
$510.84
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
