Availability
Showing In Stock Items. Show All 284 Items.
On Sale
For maximum power with exceptional drivability, transplant the power of fuel injection into your vehicle with Painless Performance fuel injection harnesses. All kits include straightforward instructions and TXL high-temperature, color-coded, and labeled wire for ease of installation. All fuel injection harnesses are 100 percent quality-tested on OmniScanners to ensure the viability of the circuits. Harnesses for both GM and Ford applications are available and they use genuine original equipment connectors for trouble-free installation and operation.
( 94 )
$299.99
—
$564.99
$269.99
—
$508.49
On Sale
Convert to a more convenient spin-on style filter and lower your ongoing filter maintenance costs with Fleece Performance underbed fuel filter assemblies. They upgrade your factory filtration with an anodized billet aluminum filter base and Donaldson spin-on canister-style filter, along with Water-In-Fuel (WIF) sensor, and integral high-flow fuel heater option. There are no additional lines to route, cut, or install, mounting in the factory location and mating directly to all factory fuel lines and WIF sensor circuitry. The Donaldson filter offers improved efficiency at low micron levels, while enduring peak water separation. Select the Fleece assembly designed for your vehicle.
Not Yet Reviewed
$299.00
—
$379.00
$254.15
—
$322.15
On Sale
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$345.99
—
$524.99
$317.99
—
$474.99
On Sale
These SLP Performance cold air induction systems increase power by replacing your restrictive stock air box assembly. The systems include a composite air box, an oversized high-flow reusable air filter, an intake tube, and hardware.
( 9 )
$349.99
$314.99
On Sale
K&N 77 Series high-flow performance cold air intake kits are aftermarket air induction kits designed for trucks and sport utility vehicles. They include a free-flowing, mandrel-bent intake tube (various materials and color options) with a Million Mile Warranty. K&N 77 Series cold air intake kits replace your restrictive factory air filter and intake housing, maximizing your power and acceleration. They include a washable, reusable air filter and offer guaranteed performance for their vehicle applications.
( 479 )
$399.99
—
$524.99
$349.99
—
$474.99
On Sale
Spectre muscle car cold air intake kits deliver the power-increasing technology that race cars and modern cars have employed for some time. A company rooted in racing with a definite bias toward early muscle cars and speed, Spectre has designed simple, universal cold air intake systems for your specific ride. Available for many applications, these intake kits let you choose the location to draw the cold air from—the wheel wells, cowls, front gravel shields, or even the high-beams—with the optional headlight scoops. The more cold air you take in, the more power you make. Spectre cold air intake kits help to reduce the incoming air temperature by introducing fresh cold air to the engine for incredible power gains; and since your engine won't need to work as hard, there's the added benefit of improved gas mileage. Order the model designed for your muscle car application.
( 32 )
$399.99
$374.99
On Sale
These FloPac cold air induction systems from SLP Performance increase power by replacing your restrictive stock intake lid. They include a new high-flow lid, a reusable air filter and cold air induction scoop, and hardware.
( 14 )
$369.99
—
$389.99
$332.99
—
$350.99
On Sale
Edelbrock Performer RPM 5.8 EFI upper plenums are powdercoated light titanium gray and the plenum cover is removable to allow easy runner access. These Edelbrock Performer 5.8L plenums are designed for truck engines and feature a modular design that incorporates the latest air-flow technology for maximum torque gains in the mid-range. Will not fit vans.
( 2 )
$583.95
$467.16
On Sale
Fleece Performance auxiliary heated fuel filter and line kits come with everything you need to properly route, plumb, and filter fuel for your diesel, including an integral high-flow fuel heating element and Water-In-Fuel (WIF) sensor. They will improve accessibility to the fuel filter, as well as reduce your ongoing maintenance cost with a lower cost Donaldson filter. Choose the kit designed for your Cummins engine. Kit includes: * Donaldson 3 micron fuel filter and water separator * Fuel filter base with integral heater and mounting hardware * Push Lock hose and all necessary AN and barb fittings * CP3 Feed fittings for 5.9L and 6.7L * Water-In-Fuel (WIF) sensor and adaptation harness
Not Yet Reviewed
$449.00
$381.65
On Sale
Fleece Performance auxiliary fuel filter and line kits include everything you need to properly route, plumb, and filter fuel for your Cummins. They will improve accessibility to the fuel filter, as well as reduce your ongoing maintenance cost with a lower cost Donaldson filter. Choose the kit designed for your Cummins engine. Kit includes: * Donaldson 3 micron fuel filter and water separator * Filter base with integral mounting * Distribution filter block/filter coupler * Push Lock hose and all necessary AN and barb fittings * CP3 Feed fittings for 5.9L and 6.7L (not included in all kits)
Not Yet Reviewed
$349.00
$296.65
On Sale
SLP Performance Blackwing cold air induction packages will help to maximize your ride's potential. Factory air boxes can restrict airflow, choking your engine and its efficiency. These induction systems will fix that problem by eliminating the factory location and moving the intake closer to the cooler, denser outside air. The reusable high-flow, conical air filter aids in gathering and transferring more air—and is quick and easy to clean. SLP Performance offers these Blackwing cold air induction packages for numerous make/models, delivering extra power and fuel economy. Order the assembly designed for your vehicle application.
( 12 )
$439.99
$395.99
On Sale
AMS Performance Alpha air filters offer you a simple upgrade for big power release—and more air intake equals more horsepower out! These high-flow filters feature CNC-machined billet aluminum construction with anodized coating to ensure they'll look and perform great for years to come. The smooth and strong mounting surface for the Alpha air filters deliver a tight seal. Couple that with a purpose-built, synthetic high-flow dry media filter, meaning you won't have to buy those cheap factory paper filters down the road. To renew the Alpha air filters' performance, simply remove and blow off the filter with compressed air periodically or wash out and let it dry. No messy oils or special chemicals are needed. Exclusive features of Alpha air filters: * Increased horsepower * Uses factory ducting for cooler air charge and maximum power * Reduces turbo lag * Smooth transition for best airflow * High-flow, low-maintenance dry media filter (no filter oil required) * Includes CNC billet aluminum adapter plate for those who wish to retain the stock air box lid and plastic inlet
Not Yet Reviewed
$399.95
$339.96
On Sale
Earl's Performance Dominator in-line billet fuel pumps are for those of you who are in need of a fuel pump that can support serious horsepower. Have a nitrous system, turbo or supercharger? No problem! These fuel pumps feature a twin-pump design that allows you to use one pump for cruising and both pumps when you activate your nitrous switch or start building boost. The second pump allows you to eliminate the unnecessary recirculating and heating of fuel that can lead to poor performance and hot fuel issues. Earl's Performance Dominator in-line billet fuel pumps also have an added benefit for hard core enthusiasts that run events like the Hot Rod Power Tour or the Baja 1000; that extra pump brings you peace of mind that you'll always finish what you've started. Features include: * Billet aluminum construction for durability and good looks * -10 AN O-ring inlet/outlet for high flow and superior sealing * Suitable for use with carbureted or EFI applications * May be fully submerged in-tank for custom applications, space savings, and reduced plumbing * Compatible with 12 V to 18.5 V systems at pressures up to 80 psi for street or race use * For hardcore race use, both pumps can be wired for full-time duty * Only 7.66 in. long x 5 in. wide x 2.5 in. tall for easy installation on frame rails or other tight areas * Patent pending dual-pump technology * Proven durability beyond 3,000 hours * Weighs only 5.1 lbs.--half a pound less than competitive 1000+ hp pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.
( 1 )
$626.95
$344.95
On Sale
The LML Duramax was not originally equipped with a fuel heater, making it prone to fuel gelling in cold temperatures. Fleece Performance auxiliary heated fuel filter kits mount in the factory location, providing for a direct factory replacement and the peace of mind to tackle the coldest of days with a high-flow fuel heater. These kits replace the factory fuel filter housing with a new filter base, integral high-flow fuel heater, Water-In-Fuel (WIF) sensor, and Donaldson spin-on canister style filter. The filter base eliminates the factory fuel primer bulb and is intended for use with a positive pressure lift pump, such as Fleece's PowerFlo lift pump or alternative frame mounted pump. Kit includes: * Fuel filter base with integral fuel heater and fittings * Donaldson 3 micron fuel filter and water separator * Pre-formed hose and hose clamps * Wiring harness and fuse taps * Water-In-Fuel (WIF) sensor and adaptation harness
Not Yet Reviewed
$399.00
$339.15
On Sale
Airaid Performance MXP cold air intake kits represent the ultimate in Airaid's cold air induction kits to deliver superior horsepower and acceleration gains for high performance gas and diesel vehicles. MXPs are simple to install, yet extremely sophisticated intake systems—specifically engineered to increase airflow, while maintaining proper air-to-fuel ratios. This eliminates the need for recalibration after installation. Airaid MXP cold air intake kits are available for a wide range of vehicle-specific applications. Features, specs and parts include: * Constructed of one-piece roto-molded air box and high-density polyethylene tube * Unique inlet track and filter combination is substantially less restrictive when compared to production-type OEM air boxes * Replaces stock intake tubing, air filter, and air box (where applicable) * High-airflow premium air filter * Washable and reusable filter media * Backed by the Airaid no-hassle Lifetime Warranty
( 4 )
$367.99
$317.99
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$532.95
—
$575.95
$426.36
—
$460.76
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$571.95
—
$617.95
$457.56
—
$494.36
On Sale
BD Diesel Premium Performance Plus fuel injectors are OE-quality stock replacements. They're assembled with the same exacting standards as BD's highest performance injectors, using Bosch procedures, and are fully calibrated and tested to ensure optimum operation. New Premium line injectors are built with new Bosch solenoids, nozzles, and control valves. Enjoy the extra 5-15 hp these flow-matched injectors deliver for around the same price as set of OE replacements would cost you. Order the model recommended for your vehicle application. Additional details: * Great for street, towing and performance * Precision-calibrated and flow-matched to a tolerance of 2 percent * Manufactured by Bosch trained technicians with over 30 years of experience * All injectors tested and validated on a Bosch 815 test bench
Not Yet Reviewed
$429.95
—
$515.95
$386.96
—
$464.36
On Sale
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$482.95
$386.36
On Sale
Summit Bucks
Mishimoto performance air intakes are engineered to be a direct-fit for your vehicle and an excellent upgrade to replace the stock air box. They're guaranteed to boost your automobile's torque and horsepower, and feature Mishimoto's lifetime warranty. The aluminum or silicone tubes are available in a variety of finishes; and an efficient cotton gauze filter is included. Order the model designed for fitment on your vehicle application.
( 1 )
$277.95
—
$563.95
$250.16
—
$499.46
On Sale
Scott Drake offers reproductions of the extremely rare 1967-68 Early Mustang 390 GT High Performance air cleaners. These concours-correct models are available with or without the Emissions Control Tube, and they include a blue base and chrome lid. The air cleaners are an excellent stock-appearing performance upgrade for the very restrictive 1968-70 390-428 air cleaners. Some early production 1968 390 GTs may have come from the factory with this air cleaner.
Not Yet Reviewed
$514.95
$462.95
On Sale
Edelbrock Performer RPM LS1 intake manifolds are manifold-only packages that allow you the opportunity to use a carburetor on these originally computer-controlled engines. Edelbrock LS1 intake manifolds are manufactured from aluminum and offer you the ability to maximize torque and increase the power curves of your engine. Are you going back to the traditional carburetor? Rely on Edelbrock Performer RPM intake manifolds.
( 12 )
$605.95
$484.76
On Sale
K&N 63 Series aircharger high performance inlet tubes run from the air intake to the turbo, increasing airflow by removing the restrictive sections of your stock inlet tubes. The increase of airflow to the turbos guarantees faster spooling and more power, plus pairing these inlet boost tubes with a K&N intake will deliver even more performance benefits to your vehicle. Choose the tubes designed for your vehicle. Features: * High-density cross-linked polyethylene construction * Stainless steel clamps * Less pressure drop at turbo inlets * Retains all OEM fittings and connections * Compatible with OEM and K&N intakes for any application * All required hardware is included
( 3 )
$419.99
$369.99
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$571.95
$457.56
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
