Availability
Showing In Stock Items. Show All 31 Items.
On Sale
These Aeromotive 340 Stealth fuel cells feature a built-in Aeromotive 340 Stealth fuel pump are capable of supporting big power in an OE-style pump configuration. They provide a number of performance advantages, including quiet, cool operation for the fuel pump by keeping it submerged through innovative baffling, even in extreme driving conditions. Their ease of installation is unmatched, with no drilling, tapping, bulkheads, sumps, or welding required. Simply strap these Aeromotive 340 Stealth fuel cells in, hook up your lines and wires, and you're done. They also save you a bundle (space, time, and cash) by eliminating all of the pre-pump plumbing usually required to run fuel cells. Fuel cell features include: * Aeromotive Stealth 340 lph internally mounted fuel pump * Pre-pump filter sock assembly * Innovative baffling system * ORB-08 outlet port * 1 AN-08 male return line port * 2 AN-08 vents with roll-over valves * Standard flush mount lid assembly * Natural aluminum finish * Optional 0-90 ohm fuel level sending unit
( 10 )
$1,115.10
—
$1,272.10
$1,003.59
—
$1,144.89
On Sale
Aeromotive 340 Stealth fuel tanks conceal impressive power components. Hiding inside the tank is the high-output electric fuel pump mounted to a quality material hanger assembly and boasting an impressive 340 lph flow! They also feature an innovative baffling/tray system to control fuel slosh and keep the fuel pump submerged. Their design provides superior EFI street performance with OEM fitment while also supporting daily driving down to very low levels of fuel in the tank. Order the Aeromotive 340 Stealth fuel tank best suited to match your vehicle's specifications for enhanced fuel storage and delivery!
( 43 )
$1,127.30
—
$1,227.00
$1,014.57
—
$1,104.30
On Sale
If you are adding nitrous or boost to your 2010-2015 Camaro race car, Holley has the fuel pump upgrades for you, like these dual in-tank pumps. The fuel pump module design starts with a billet pump flange assembly and connects it to dual 340 or 450 LPH fuel pumps for maximum fuel delivery. The module also includes two HydraMats to eliminate fuel starvation under hard acceleration or cornering. The integrated jet pump assembly allows retention of factory drivers side fuel pickup. A new level sensor is included and pre-installed. Installation is as simple as removing factory module and replacing with Holley module. Select the dual in-tank pump model that's designed for your application. Features and benefits: * Machined, billet, anodized, laser-etch components for durability and good looks * -8AN ORB inlets and outlets (return fitting included) * Two HydraMats, one for each pump * Integrated jet pump assembly allows retention of factory drivers side fuel pickup * Have been tested to deliver stable fuel pressure down to low fuel indicator warning light * Brand new level sensor included and pre-installed to make installation as simple as removing factory module and replacing with Holley module * Outlet fitting included to connect to factory feed line * Secondary ORB port machined into flange for easy AN plumbing of feed line * Module is return-style only so a regulator must be installed
Not Yet Reviewed
$1,249.95
$1,123.95
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 26 )
$1,249.95
—
$1,499.95
$1,123.95
—
$1,348.95
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 9 )
$1,349.95
—
$1,599.95
$1,213.95
—
$1,438.95
On Sale
Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? The new Holley Sniper 2 fuel injection upgrade kits are designed to do exactly that! Included with each Sniper 2 plug-and-play upgrade system is an adapter solution that connects your existing Sniper EFI wiring harness to a Sniper 2 throttle body in minutes. Simply remove your Sniper EFI throttle body from the intake manifold, unplug all connectors, reinstall the Sniper 2 throttle body, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choice, and enjoy the benefits of Sniper 2 EFI. The #1 EFI conversion system just got better! Introducing Sniper 2 EFI—a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion simpler, more reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will self-tune with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Four total upgrade kits are available: polished and black, with or without external fuel pressure regulator (required for Sniper 2). Upgrade kit features: * Update your Sniper EFI to the new, improved Sniper 2 in less than one hour! * Eliminates the need to rewire your existing installation; one step, plug-and-play upgrade to a Sniper 2 * Improve your ride with the Sniper 2, including wireless connectivity, smooth throttle feel, improved RF resistance, and a hidden wiring harness. * Reuses existing coolant temperature and oxygen sensors * Female -6 AN O-ring fittings for a tight seal * Overall height is only 3.280 in. to fit under most hoods * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI of regulated fuel supply * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Sniper 2 is part of the Sniper EFI complete ecosystem * Available with fuel system kits: that include an adjustable external regulator, fittings, and a 3 ft. section of fuel hose, allowing you to easily mount your regulator in the engine bay Additional NEW features: * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 21 )
$1,149.95
—
$1,399.95
$1,033.95
—
$1,258.95
On Sale
Holley Sniper EFI Quadrajet self-tuning fuel injection systems are ideal replacements when you're tired of rebuilding the 50-plus-year-old Rochester Quadrajet (Q-jet) on your classic ride. They're the first bolt-on, spread-bore, EFI throttle-body systems not requiring any additional adapters, sealing plates, or intake manifold swaps. They retain the same great features as the 4150 Sniper EFI version (four 100 lbs.-hr. injectors; built-in timing control; high resolution 3.5 in. full color touchscreen; etc.). Their throttle body will support naturally aspirated power up to 500 hp. In addition, they offer multiple fuel inlet configurations that allow for a stock-appearing installation and fit most stock air cleaners. Modernize your Q-jet-powered classic vehicle with a Holley Sniper EFI Quadrajet self-tuning fuel injection system. They are offered individually or in Master kits with external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank. Features, items, and specs: * Designed to deliver the signature "Rochester Roar" at wide-open throttle! * Throttle body-mounted ECU–no extra boxes to mount * Only 4 wiring connections required (battery positive and negative, switched ignition, and rpm) * Transmission provisions on throttle lever for TH350/TH400 and 200R4/700R4 * Universal throttle and transmission kick-down bracket * Brake booster adapter (if required) * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required) * Internal fuel pressure regulator preset to 58.5 psi * 20 ft. of 3/8 in. Vapor Guard fuel hose * Fuel pump and filters * Necessary hardware and bulkhead fitting to return fuel to the tank * Genuine Bosch LSU 4.9 wide-band oxygen sensor provides real-time fuel map learning * OEM-style throttle position sensor (TPS) and idle air control (IAC) for years of dependable service * Clamp-on oxygen sensor kit ensures leak-free oxygen sensor installation with stainless steel T-bolt clamps and weld-ready oxygen sensor flange * United States Coast Guard approved (certified to ISO 8846, SAE J1171 requirements) * Available in three finishes--Classic Gold, Shiny, and Black Ceramic
( 7 )
$1,649.95
$1,483.95
On Sale
Holley Sniper BBD 2-barrel fuel injection systems offer not only exceptional throttle response and outstanding power gains over a carburetor, but you can also gain timing management. Put an end to cold start issues, hesitations, vapor lock, and flooding. Enjoy all the benefits of EFI by upgrading to this Holley Sniper system—with performance and economical pricing Jeep owners want! Features include: * Bolt-on BBD carburetor replacement * Engineered specifically for 1971-1986 Jeep CJ's with 258ci 6-cyclinder engines * Supports up to 350 hp with two 100 lb./hr. injectors * Throttle body mounted ECU (no extra boxes to mount) * Only four wiring connections required (battery+, battery- , switched ignition, and rpm) * Integrated ignition timing control * Simple calibration wizard * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Internal fuel pressure regulator (preset to 58.5 psi) eliminates the hassle of plumbing an external unit * Self-tuning ECU * OEM-style TPS/IAC and fuel pressure regulator * Bosch LSU 4.9 wideband oxygen sensor (provides real-time fuel map learn) * Clamp-on oxygen sensor kit and all hardware for installation
( 6 )
$1,349.95
$1,213.95
On Sale
Aeromotive A1000 Stealth fuel cells feature a built-in Aeromotive A1000 fuel pump and a 100 micron stainless steel prefilter. They can be mounted anywhere in any car. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and you're done. You won't have to search any longer for a place to mount your fuel pump and pre-pump filter. Through an innovative baffling system inside of the cells, the fuel pump inlet always has a constant column of fuel. In addition, the Aeromotive A1000 Stealth fuel cells' baffling keeps fuel at that same point, even during extreme driving conditions, making them perfect for off-road vehicles, drag racing, and even autocross and drifting. Plus, the pump is inside of the cells, so noise is drastically reduced, and the fuel pump runs cooler longer, ensuring longevity and drivability. Additional features include: * Available in 15 or 20 gallon capacity * All-aluminum construction * TIG-welded * Flush mount lid assembly * Two -8 AN rollover valves * Universal 0-90 ohm built-in fuel level sending unit * -8 AN return fitting for bypass line from the fuel pressure regulator
( 6 )
$1,293.85
—
$1,439.20
$1,164.46
—
$1,295.28
On Sale
Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.
( 2 )
$1,338.40
—
$1,439.20
$1,204.56
—
$1,295.28
On Sale
Holley Sniper EFI 2GC large bore fuel injection systems let you convert your classic 2GC large bolt pattern carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI. You can also use the Sniper EFI 2GC to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature two 100 lb./hr. fuel injectors capable of supporting 350 hp on naturally aspirated engines. The Sniper EFI systems are also available in a Master Kit option, which includes 20 ft. of fuel hose, two filters, one high-pressure EFI fuel pump, and all required fittings for a complete EFI fuel system conversion. Standard and Master Kit systems are available in a choice of throttle body finishes. Standard Sniper EFI system features: * Bolt-on 2GC large bore carburetor replacement * Universal throttle lever with TH350, 700R4 and 200-4R kickdown provisions * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control (with MSD Pro Billet, Holley Dual Sync, or Holley Hyperspark distributors) * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion for 1974-78 Chevrolet, GMC, Oldsmobile, and Pontiac vehicles that came with a Rochester 2GC large bore carburetor.
Not Yet Reviewed
$1,299.95
—
$1,599.95
$1,168.95
—
$1,438.95
On Sale
Aeromotive Eliminator Stealth fuel cells feature their built-in Eliminator electric fuel pump and a 100 micron stainless steel prefilter. They can be mounted anywhere in any car. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and you're done. You won't have to search any longer for a place to mount your fuel pump and pre-pump filter. Through an innovative baffling system inside of the cells, the fuel pump inlet always has a constant column of fuel. In addition, the Aeromotive Eliminator Stealth fuel cells' baffling keeps fuel at that same point, even during extreme driving conditions, making them perfect for off-road vehicles, drag racing, and even autocross and drifting. Plus, the pump is inside of the cells, so noise is drastically reduced, and the fuel pump runs cooler longer, ensuring longevity and drivability. Additional features include: * Available in 15 or 20 gallon capacity * All-aluminum construction * TIG-welded * Flush mount lid assembly * Two -8 AN rollover valves * Universal 0-90 ohm built-in fuel level sending unit * -8 AN return fitting for bypass line from the fuel pressure regulator
( 1 )
$1,405.25
—
$1,573.45
$1,264.72
—
$1,416.10
On Sale
Aeromotive 3.5 gpm brushless variable speed gear pumps are engineered from the ground up for winning performance. These efficient pumps utilize a spur gear design, paired with a brushless motor, to deliver 3.5 gpm at 60 psi. Their inline flow-through design features contoured port machining and no shaft seals, while offering low amp draw, excellent heat dissipation, and high-pressure capabilities. The units are True Variable Speed (TVS) controlled, offering the advantage of pump speed control via a 0-5 V analog DC input signal. The Pro-Series TVS controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low demand, decreasing an already low current draw, and, therefore, minimizing the introduction of heat even further. Lots of power needs lots of fuel; Aeromotive 3.5 gpm TVS brushless gear pumps will feed your hungry high performance machine. Order the body style preferred for your application.
Not Yet Reviewed
$1,695.45
$1,525.90
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 24 )
$1,649.95
$1,483.95
On Sale
Aeromotive Eliminator brushless variable speed in-tank fuel pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these True Variable Speed (TVS) units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The Eliminator in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,690.15
$1,521.14
On Sale
MSD Power Grid boost controllers let the driver regulate the amount of boost pushing air into the engine. These controllers allow you to devise a timing map based on boost pressure, and map entire runs with advanced View software. Values are based on pressure sensors, including a 4-BAR internal, which is good through 43.5 psi. The units include a safety overboost shut-down feature and boost pressure activation output. (To use any modules with the Power Grid system, users must plug the modules into a 4-connector CAN-Bus hub to be attached to the Power Grid system controller). For optimum control of boost, use MSD Power Grid boost controllers.
( 1 )
$1,549.95
$1,393.95
On Sale
Efficiency is the name of the game and the COBB Tuning front mount intercooler cores are a winner! They will allow you to get the most out of your stock turbo—and still have plenty left over for future upgrades to go along with it. COBB units are a larger volume, larger core unit that will help reduce intake charge temperatures, especially if you're making more power from the factory. Plus, these intercoolers are a direct drop-in core that arrives ready to install to run with factory intercooler plumbing. If you're looking for an effective solution to eliminate inconsistent power delivery from your turbocharged vehicle, look no further than the all new COBB Tuning front mount intercooler cores! Additional COBB front mount intercooler core features include: * Larger size, front mount intercooler made from high-grade aluminum in choice of black or silver finish * Unique, custom designed fin within the "hot side" endtank helps to evenly disperse incoming air across the entire core * Easiest way to drastically improve power when coupled with tuning from the V3 Accessport * Bar and plate structure * Cast end tanks with the COBB logo * 4-ply black silicone couplers and worm clamps ensure a leak-free connection to the factory charge pipes * No cutting or fabrication required for installation
Not Yet Reviewed
$1,125.00
—
$1,150.00
$1,012.50
—
$1,035.00
On Sale
APR intercooler systems result in repeatable performance—even in the most demanding of situations. These massive front-mounted upgrades dramatically reduce intake air temperature (IAT), minimize heat soak, and provide increased performance in easy-to-install, direct bolt-on designs. The superior effectiveness and performance of APR systems is focused around core selection, end tank design, and specific install location for each application. Balancing all the necessary characteristics, APR's engineers perfected units with exceptional cooling and lowered pressure loss across the core, while maintaining critical airflow to components behind the system—delivering maximum performance and far exceeding the capabilities of factory intercoolers. Features may include: * Aluminum construction * Large bar-and-plate design with densely packed staggered and louvered fins * Smooth cast aluminum end tanks engineered for low turbulence/restriction and maximum flow * Pressure tested to prevent power robbing boost leaks * Full directions and APR world-renowned customer support * Some systems may include CNC-bent and TIG-welded mounting brackets, high-quality multi-ply silicone inlet and outlet hoses, T-bolt clamps, and billet MAP sensor housings
Not Yet Reviewed
$1,399.95
—
$1,499.95
$1,258.95
—
$1,348.95
On Sale
Aeromotive Gen II Stealth fuel tanks utilize patented and award-winning Phantom technology. This enables a quiet, high-flow EFI pump and baffle to maintain ample fuel supply around the inlet of the pump—which, in turn, ensures consistent fuel delivery and drivability even in low fuel conditions. The tanks feature outlet and return ports, along with electrical terminals positioned in the OEM location. This design enables flush installation to the vehicle floor and will not require strap modification or spacers. All Gen II Stealth tanks come out of the box completely assembled. The fuel pump, fuel level sending unit, and fuel/electrical bulkhead are pre-installed. As a true plug-and-play assembly, an Aeromotive Gen II Stealth tank will get you out of the garage and on the road in no time. Order the model recommended for fitment on your vehicle.
( 68 )
$1,280.95
$1,152.86
On Sale
FUELAB Gold fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$1,175.00
$1,057.50
On Sale
Aeromotive offers various brushless A1000 fuel cells, featuring the pump and a 100-micron prefilter which can be mounted anywhere in any vehicle. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and get ready to drive! Through an innovative interior baffling system, the inlet carries a constant column of fuel, keeping it at that same point, even during extreme driving conditions. This quality makes them perfect for off-road vehicles, drag racing, autocross, drifting, and more! Additional features include: * Available in 6, 15, or 20-gallon capacities * In-cell pump reduces noise and prolongs cooler running for longevity and drivability * All-aluminum construction * TIG-welded * Flush-mount lid assembly * (2) -8 AN rollover valves * Universal 0 to 90-ohm built-in fuel level sending unit * Return fitting (-8 AN) for bypass line from the fuel pressure regulator * Brushless pump allows for higher pressure with minimal drop in flow
( 1 )
$1,417.45
$1,275.70
On Sale
COBB Tuning front mount intercooler kits replace your overworked stock units to deliver a drastic increase in cooling and power, especially when paired with tuning from Accessport (not included). Available for several applications, most of these kits feature larger cores with efficient bar and plate designs and cast aluminum end tanks, piping, and more (depending on your application). Escalating intake air temperatures under the hood can overwhelm your factory FMIC with heatsoak and take away power. Put one of these COBB Tuning front mount intercooler kits near the top of your modification list and make your car come alive with new found colder air charge.
Not Yet Reviewed
$1,290.00
$1,161.00
On Sale
Dinan carbon fiber air intake systems force-feed the engine with greater volumes of cool, oxygen-rich air for substantial power gains. These kits are so effective that the carbon fiber inlet air temperature is a full 40 degrees F cooler than the incoming air from the stock inlet. Due to the increased airflow, the power-curve is extended into the higher rpm for a noticeable change. Dinan carbon fiber air intake systems are direct replacements for the factory air box lid. They employ a hand-crafted carbon fiber unit--including a secondary carbon fiber intake tube that captures cool air from the lower grill. Shielding is provided for the conical filter to insulate it from power-robbing engine compartment heat. Order the model designed for your vehicle and engine application.
( 4 )
$1,399.95
—
$1,599.95
$1,258.95
—
$1,438.95
On Sale
APR carbon fiber intake systems let your engine breathe! The stunning carbon fiber design rejects power-robbing heat from your engine bay and efficiently delivers an unrestrictive path for cold, dense air fed from outside the engine bay. These systems use high-flow filters, providing excellent filtration without restrictions—prudently keeping the engine clean and optimizing power delivery. They dramatically outflow your stock intake, sharpening throttle response and lessening strain on the turbocharger. APR carbon fiber intake systems typically install in minutes, look fantastic, instantly deliver a sporty engine note, and are recommended for all stages of performance.
Not Yet Reviewed
$1,399.95
—
$1,499.95
$1,049.95
—
$1,124.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
