Availability
Showing In Stock Items. Show All 47 Items.
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 45 )
$204.99
—
$257.99
$199.99
—
$242.99
On Sale
Blue electric fuel pumps from Holley feature an improved design for street and strip applications, a new lower housing casting for enhanced fuel flow, and a tumble-polished billet look with the distinctive blue logo. These pumps have a 110 gph flow rate, draw only 3 amps, and have a maximum pressure of 14 psi. They weigh only 3 lbs., and include a mounting bracket.
( 303 )
$239.95
$179.95
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 348 )
$138.95
—
$230.95
$104.95
—
$150.95
On Sale
Summit Racing™ fuel pump and regulator Pro Packs consist of proven performance fuel pumps and regulators. Just select your brand, flow rate, and pressure requirements, and one part number gets you everything. We've even included a relay kit with the electric fuel pump combos. Economical and convenient, Pro Packs are available for virtually any application from the 1950s and up.
( 60 )
$271.94
—
$280.90
$200.90
—
$211.94
On Sale
Weiand high-rise/dual-plane Speed Warrior intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrel carburetors and make power from 1,500 to 6,700 rpm. That makes Weiand Speed Warrior intake manifolds the perfect choice for your street/strip vehicle. To make more power you have to get more air to your engine. Look to Weiand as your power source! Features include: * Permanent mold castings * Precision CNC-machined * Available with exhaust crossover for improved street drivability * Also available with isolated runners to reduce intake charge heating * Available finishes: as cast; polished; black ceramic coating; Everbright * Offered for standard small block Chevy heads, non-EGR 262 c.i.d. to 400 c.i.d. heads, and Vortec (L31) or non-Vortec heads
( 51 )
$299.95
$224.95
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 31 )
$349.99
$249.99
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 48 )
$328.99
—
$340.99
$228.99
—
$240.99
On Sale
These AEM Electronics high-flow in-tank electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a prefilter, hose, clamps, and flying lead.
( 50 )
$162.95
$105.95
On Sale
Do you want a better fuel pump option? Mr. Gasket meets your fuel needs with high performance electric fuel pumps. These reliable, lightweight fuel pumps are 100 percent pressure-tested for high-flow applications. Mr. Gasket high performance electric pumps are universal inline-style rotor/vane fuel pumps that are compatible with all carbureted engines and feature 3/8 in. inlet/outlet connections. The pumps are available with or without a regulator. Options are good. Get a better fuel pump at a better price with Mr. Gasket high performance electric fuel pumps.
( 17 )
$154.95
—
$211.95
$100.95
—
$137.95
On Sale
Holley Sniper stock replacement fuel tanks are designed to meet or exceed the quality of your factory original. Whether you have a track or street car, or a car you're restoring, Sniper has the high-quality fuel tanks you're looking for. Start your fuel system project fresh with a Holley Sniper stock replacement fuel tank—order the model designed for your application. Features include: * The steel fuel tanks have a galvanized finish for corrosion protection and good looks * Stock replacement fuel tanks are made to OEM specifications for a great fit * Perfect companions with Holley muscle car EFI modules or Retrofit EFI pump modules * Tank sending unit lock ring is included
( 61 )
$212.95
—
$286.95
$117.95
—
$157.95
On Sale
Holley Dominator billet fuel filters are precision CNC-machined from 6061-T6 billet aluminum for maximum strength and durability. They feature a black bright dip anodized body and clear bright dip anodized ends for superior corrosion resistance and good looks. Holley Dominator billet fuel filters flow an outstanding 260 gph, have -12 AN O-ring connections, and come available in your choice of 10, 40, or 100 micron ratings.
( 8 )
$154.95
$100.95
On Sale
Holley boost control solenoids are designed for optimal performance when using the boost control function of Holley EFI. Some setups require two solenoids and some require one. They're driven by a Pulse Width Modulated (PWM) output of the ECU. It is advised NOT to use the PWM+ outputs on a Holley HP ECU, but rather use the PWM- outputs. If you have a Holley Dominator ECU, use either the PWM- outputs or a PWM+ output on the J2B connector.
( 4 )
$182.95
$118.95
On Sale
MSD Atomic EFI billet fuel rails are the perfect complement for your Atomic AirForce intake manifold. Whether you're looking for just rails, or complete kits with all the necessary plumbing--these fuel rails will have you looking for any excuse to pop the hood. They feature a bright dip, black anodized finish with laser-etched logos and a 5/8 in. diameter fuel passage flow capacity for high-horsepower applications. Make your engine look as good as it performs with MSD Atomic EFI fuel rails. Features, specs, and parts may include: * Fuel rails are machined to accept large -8 (3/4 in.-16) O-ring fittings * Includes mounting brackets and hardware * Includes four -6 to 3/4 in.-16 O-ring adapters
( 1 )
$249.95
—
$338.95
$137.95
—
$186.95
On Sale
The amazing HydraMat fuel pickups feature Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks, as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. The Holley HydraMat fuel pickups are the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. Holley HydraMats are available in various sizes and shapes to fit a wide variety of stock fuel tanks and/or race fuel cells. Features and benefits: * Patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells * Greatly reduces the potential for air to enter into the fuel system which can result in poor engine performance and/or engine stalling * Perfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions * Surface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered * As an area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available * Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions * Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity * Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump * Can be folded and compressed for easy installation through a variety of fuel cell openings * HydraMats are also available in other sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells * Not for use with diesel fuels
( 64 )
$199.95
$109.95
—
$129.95
On Sale
Summit Racing™ fuel tanks are designed to meet or exceed the quality of factory fuel tanks. Whether you have a track car, classic car, or car you're restoring, Summit Racing™ has the high-quality fuel tanks you're looking for.
( 222 )
$204.99
—
$271.99
$184.49
—
$244.79
On Sale
Bring retro-styling back to the top of your engine with Holley Vintage Series air cleaner assemblies. Their diecast aluminum construction comes in a variety of finishes and logos. Holley Vintage Series air cleaners also include a carburetor air horn gasket and mounting hardware to complete the installation. Order the size, shape, and other options best suited for your vehicle. Product features include: * Your choice of a replaceable paper or a reusable premium cotton gauze (red) air filter element * Premium cotton gauze filter elements are pre-oiled * Color-matched, stamped steel SureFlo-style bases with knock out provisions for a fresh-air adapter * Filter care instructions
( 61 )
$211.95
—
$219.95
$116.95
—
$120.95
On Sale
Quick Fuel fuel pressure regulators are made with premium materials throughout and include a broad range of styles with bodies made from cast aluminum or machined aircraft-grade billet aluminum. Offered in a variety of anodized and powdercoated body and top finishes for added durability and reliable performance, they are all designed to provide smooth, consistent, and repeatable performance.
( 74 )
$256.95
$141.95
On Sale
Install Holley VR Series billet fuel filters in-line before the pump and eliminate issues before they begin. Fuel isn't a perfect liquid--it has particles floating around, some large enough to cause problems. These prefilters are CNC-machined from 6061-T6 billet aluminum and combine black anodized bodies and clear anodized ends for strength, corrosion resistance, and style. They're available in three different micron depths to best meet your EFI or hot street/race carb needs. Keep your vehicle's fuel pump happy with Holley VR Series billet fuel filters.
( 5 )
$184.95
$120.95
On Sale
Holley water/methanol injection pumps help to increase the power of your engine. They make great replacements for most water/methanol kits. Or you can use them when creating your own special setup. The pumps are designed with high-quality diaphragms and EPDM seals to withstand the harshest of alcohol mixes.
( 1 )
$411.95
$226.95
On Sale
Contaminated fuel translates into poor results on the race track and an often-sluggish ride on the highways. Earl's Performance billet inline fuel filters are built for high-flow and high-filtration efficiency. Precision CNC-machined from durable 6061-T6 aluminum, each housing is anodized clear and black for a modern look, as well as resistance to corrosion. These filters are available with options for both flow rate and micron rating. Replacement elements are available, sold separately. Features include: * 175 gph filters include female -8 AN O-ring inlets and outlets * 100 gph filters are built with female -6 AN O-ring end fittings * 260 gph and 460 gph filters feature female -12 AN O-ring inlets and outlets * 10 micron filters are recommended for use as a post-filter in EFI systems * 40 micron filters are for use as a post-filter in carbureted systems * 100 micron filters can be used as a prefilter in either type of system * 40 and 100 micron filters include a woven mesh stainless steel element * 10 micron versions feature a depth media element
( 5 )
$186.95
$102.95
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 138 )
$399.95
$219.95
On Sale
MSD LS Airforce intake fastener kits serve as high-quality bolt replacements, specifically designed for the MSD Airforce intake manifolds (2701 and 2702 models). The Allen head style bolts are made from stainless steel with a natural finish and come with washers to facilitate fuel injection throttle body attachment.
( 1 )
$249.95
$137.95
On Sale
Holley electric in-tank fuel pumps provide the extra fuel required after completing other engine modifications, such as adding performance camshafts, headers, larger injectors, and so on. They use a proven gerotor-type pump and are compact enough to fit existing hanger assemblies. They're also designed for easy installation and come complete with instructions and all necessary parts, including a new strainer-type fuel filter. Dozens of models and options are available; order the fuel pump recommended for your vehicle.
( 11 )
$273.95
—
$362.95
$178.95
—
$199.95
On Sale
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 39 )
$349.95
$192.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
