Availability
Showing In Stock Items. Show All 12 Items.
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$1,049.95
$763.95
—
$999.95
On Sale
Holley Sniper EFI fuel tank systems will complete your EFI swap. They fit and look like an OE tank, but each Sniper tank is a direct-fit for your application, which means no modifications for you to perform. The tanks are powdercoated galvanized steel for corrosion resistance and lasting good looks. Your Holley Sniper EFI fuel tank kit will include the tank, fuel pump, fuel level sender, and internal baffling. Some kits may also include filler neck and tank straps. Sniper EFI tanks feature: * Fuel pump (255 lph) with hanger assembly gives you the fuel you need with in-tank quietness * Sender has 1/4 in. NPT supply and return line ports for easy connection and a barbed vent fitting * Fuel level sender has the correct ohm range for your factory gauges * Fuel pump and sender are recessed in the tank to provide an easy installation * EFI-style tank baffling includes a large 4.3L internal fuel tray to prevent fuel pump starvation
( 23 )
$999.95
$763.95
—
$999.95
aFe Magnum Force Pro Dry S Stage 2 Si air intake systems feed your engine clean, cool air—and lots of it! These systems feature fully sealed intake housings that keep out warm air under the hood and bring in cooler outside air for a denser intake charge. They're fitted with a heat-insulating molded plastic intake tube and a unique turbo adapter that funnels air into the turbo for improved volumetric efficiency and maximum performance, while lowering intake air temperatures. And, keeping the air clean is the patented 360 degree Pro Dry S performance cone filter. With three layers of fine mesh synthetic oil-free media and polyurethane construction, these conical filters will last a long time and through multiple cleaning cycles. Assembly and installation are easy, as these systems use factory mounting points. Flow maximum oxygen to your engine with these Magnum Force Pro Dry S Stage 2 Si air intake systems from aFe.
( 3 )
$836.00
aFe Track Series carbon fiber Pro Dry S air intake systems are open-element designs displaying massive air filters and carbon fiber intake tubes. Laid out to fit each specific make and model available, the systems outflow factory intakes, deliver a more aggressive sound, and add plenty of style for under your hood. aFe Track Series carbon fiber systems may feature: * Lightweight high-gloss, clearcoated 100 percent twill weave carbon fiber tubes * Large oil-free Pro Dry S 3-layer washable/reusable high performance air filter * Stainless steel clamps, silicone couplers, and hardware * Housings made from XLPE (cross-linked polyethylene) polymer minimize warm engine air for maximum performance * Aluminum heat shields are one-piece, lightweight, and powdercoated black—block performance-robbing engine heat * Unique (patent-pending) filter-to-housing interface using fewer parts than traditional systems for a hassle-free installation
( 2 )
$908.25
—
$940.80
On Sale
APR intercooler systems result in repeatable performance—even in the most demanding of situations. These massive front-mounted upgrades dramatically reduce intake air temperature (IAT), minimize heat soak, and provide increased performance in easy-to-install, direct bolt-on designs. The superior effectiveness and performance of APR systems is focused around core selection, end tank design, and specific install location for each application. Balancing all the necessary characteristics, APR's engineers perfected units with exceptional cooling and lowered pressure loss across the core, while maintaining critical airflow to components behind the system—delivering maximum performance and far exceeding the capabilities of factory intercoolers. Features may include: * Aluminum construction * Large bar-and-plate design with densely packed staggered and louvered fins * Smooth cast aluminum end tanks engineered for low turbulence/restriction and maximum flow * Pressure tested to prevent power robbing boost leaks * Full directions and APR world-renowned customer support * Some systems may include CNC-bent and TIG-welded mounting brackets, high-quality multi-ply silicone inlet and outlet hoses, T-bolt clamps, and billet MAP sensor housings
Not Yet Reviewed
$999.95
$898.95
—
$999.95
aFe Track Series carbon fiber Pro 5R air intake systems are open-element designs displaying massive air filters and carbon fiber intake tubes. Laid out to fit each specific make and model available, the systems outflow factory intakes, deliver a more aggressive sound, and add plenty of style for under your hood. aFe Track Series carbon fiber systems may feature: * Lightweight high-gloss, clearcoated 100 percent twill weave carbon fiber tubes * Large pre-oiled Pro 5R 5-layer washable/reusable high performance air filter * Stainless steel clamps, silicone couplers, and hardware * Housings made from XLPE (cross-linked polyethylene) polymer minimize warm engine air for maximum performance * Aluminum heat shields are one-piece, lightweight, and powdercoated black—block performance-robbing engine heat * Unique (patent-pending) filter-to-housing interface using fewer parts than traditional systems for a hassle-free installation
( 3 )
$908.25
On Sale
Dinan carbon fiber air intake systems force-feed the engine with greater volumes of cool, oxygen-rich air for substantial power gains. These kits are so effective that the carbon fiber inlet air temperature is a full 40 degrees F cooler than the incoming air from the stock inlet. Due to the increased airflow, the power-curve is extended into the higher rpm for a noticeable change. Dinan carbon fiber air intake systems are direct replacements for the factory air box lid. They employ a hand-crafted carbon fiber unit--including a secondary carbon fiber intake tube that captures cool air from the lower grill. Shielding is provided for the conical filter to insulate it from power-robbing engine compartment heat. Order the model designed for your vehicle and engine application.
( 4 )
$999.95
$898.95
Rhodes Race Cars offers several direct-fit fuel cells. They are made from .100 thick, 5051 aircraft aluminum alloy to ensure the best quality material and craftsmanship. Designed with your safety in mind, most options are internally baffled, will include a factory-style, standard, or sumped pickup, and are available with or without a single or dual internal fuel pump. Select the Rhodes vehicle-specific fuel cell needed for your ride.
Not Yet Reviewed
$889.95
—
$999.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
