Availability
Showing In Stock Items. Show All 679 Items.
When replacing your carburetor, make sure to install new studs for a good seal to the manifold. These Summit Racing™ carburetor stud kits include four studs, four washers, and four nuts.
( 140 )
$5.99
—
$7.99
Cover the hole left behind from your mechanical fuel pump with Summit Racing™ steel block-off plates. These chrome plates are not only functional, but also nice looking.
( 122 )
$9.99
Designed for carbureted systems, our precision-welded fuel filters are rated to handle pressures up to 100 psi and trap particles as small as five microns. They are made from high-quality stainless steel and polished to a show-quality finish.
( 68 )
$4.99
—
$9.99
Safer than single-spring types, our Summit Racing™ dual carb return springs are required by most race sanctioning bodies.
( 52 )
$8.99
Quiet down that rattle at the gas tank with Tanks Inc. fuel tank mounting strap liners. They're specially-cut, anti-squeak rubber strips that are installed between the fuel tank and the mounting straps beneath your chassis. .
( 16 )
$7.99
Summit Racing™ air cleaner stud adapters mate your air cleaner to your carburetor. Our adapters permit you to fit air cleaners with a 1/4 in. stud and wing nut on carburetors with a 5/16 in. mounting hole. These stud adapters are made from steel and are given a zinc oxide coating for corrosion resistance. Add your air cleaner assembly with the assistance of Summit Racing™ air cleaner stud adapters.
( 45 )
$5.99
Fuel filters are often forgotten--yet the gasoline, diesel, or biodiesel fuels we put into our vehicles typically contain contaminants such as dirt, rust, scale, and water. Such impurities can plug fuel injectors and carburetors, resulting in serious engine problems. The contaminants often originate from dirty and rusty storage tanks, and as the vehicle ages, from corrosion within the fuel system. While important for gasoline-fueled engines, fuel filters for diesel engines are especially critical. All diesel fuel contains some water--and removing it is crucial. The primary fuel filter for any diesel engine should always be a fuel/water separator and all WIX fuel filters for diesel engines feature Quickvent water removal capabilities. Biodiesel fuels have a solvent quality and a tendency to attract even more water, and increase the need for proper fuel/water separation. Whether gasoline or diesel, help your engine run cleaner, healthier, and longer with WIX fuel filters.
( 196 )
$3.99
—
$9.99
Holley offers their accelerator pump diaphragms for all of their carburetors. These quality pieces ensure that the job is done right and help to keep your carb functioning like new.
( 119 )
$6.04
To achieve the throttle return response needed with your high performance carburetor, order Dorman replacement throttle return springs. They're available in a variety of sizes, finishes, and quantities. Constructed from high-quality materials for long-lasting durability, Dorman throttle return springs will keep you in control of the accelerator!
( 31 )
$3.99
—
$6.99
Rebuilding your carburetor? Summit Racing™ accelerator pump diaphragms are just what you need if you answered yes. Perfect for rebuilds or general replacement our accelerator pump diaphragms are offered in rubber and GFLT, so they're compatible with gasoline and alcohol, for both 30cc and 50cc pumps.
( 32 )
$5.99
—
$9.99
Summit Racing™ offers 4-window power valves for a wide range of Holley and Quick Fuel carburetor applications. These single-stage, high-flow replacements are available in a variety of primary stage opening vacuum points, from 2.5 in. Hg to 10.5 in. Hg. Gaskets are included with each valve. Dial in your power valve opening point with economical units from Summit Racing™.
( 3 )
$8.99
If your engine isn't wanting to idle down, Allstar Performance universal dual throttle return spring kits can help correct that annoying problem. These dual throttle return spring kits consist of two springs and a mounting bracket to allow for proper throttle actuation.
( 15 )
$8.99
ARP durable fuel pump bolts are rated at 170,000 psi, which is a lot stronger than Grade 8 hardware. They come in your choice of black oxide chromoly steel or rustproof stainless steel, and are available in either conventional hex or compact 12-point style heads. All kits come complete with washers.
( 58 )
$5.99
—
$9.99
Maintaining a clean fuel system has never been easier with help from Summit Racing™. These replacement fuel filter elements will reduce harmful dirt and debris to keep you hot rod running like new. They are designed for Summit Racing™ fuel filters only.
( 65 )
$7.99
—
$9.99
Is it time to hook up your throttle linkage? If so, then you'll need one of these Summit Racing™ carburetor throttle lever studs to get the job done. We include nuts and washers, too. They're available in different sizes and configurations (including swivel) for throttle or kickdown applications.
( 32 )
$4.99
—
$6.99
Summit Racing™ fuel pump mounting plates assist you in installing your mechanical fuel pump properly. Our steel plates have a nice chrome finish that looks good and includes a gasket for a good seal. Put one of our Summit Racing™ fuel pump mounting plates between your block and pump for a leak-free install.
( 6 )
$5.99
These Summit Racing™ air cleaner spacers are designed to fit between your carburetor neck flange and the air filter assembly. They come in different heights to allow the amount of clearance you need for your application.
( 78 )
$4.99
—
$5.99
Summit Racing™ power valve plugs will block the power valve from enriching the carburetors main circuit. Some racers prefer to run like this, requiring them to increase jet sizes which compensates for the power valves elimination.
( 5 )
$3.99
Summit Racing™ offers a range of quality T6063 aluminum air intake tubing: straight tubes, mandrel, and tight radius welded angles available in a variety of lengths and diameters. Choose the style for your specific application needs to help complete your project.
( 90 )
$4.99
—
$9.99
These Summit Racing™ air filter assembly studs are what you need to top off that new carburetor installation. Available in straight or offset designs to suit your needs.
( 3 )
$6.99
—
$8.99
Our Summit Racing™ carb adapter plates allow you to bolt a different bolt pattern carburetor to your existing intake manifold. They come available in several configurations.
( 162 )
$9.99
FAST fuel injector O-rings help you maintain leak-free performance. These small but vital components will ensure your fuel injectors do their job efficiently by delivering a tight seal at the intake manifold. Damaged rings could be hazardous; replace yours with FAST fuel injector O-rings.
( 3 )
$7.95
—
$8.95
Fram Extra Guard air filters help keep damaging particles from entering your engine and causing increased wear. They feature a dry paper element with a standard screen for durability. These air filters are designed to keep your engine running at peak performance under any driving conditions. When you're ready to replace your present air filter, order the Fram Extra Guard air filter designed for your year, make, and model.
( 82 )
$5.69
—
$9.99
Our Summit Racing™ needle and seat hardware kits include a adjusting nut, lock screw with gasket, and o-ring. everything you need to replace the existing hardware on fuel bowls with center hung floats.
( 13 )
$6.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
