Availability
Designed as a bolt-on replacement for GM's venerable Quadrajet, Holley's 4175 carburetors utilize a front-mounted fuel bowl fitting, allowing you to reuse the stock fuel line. Other features include vacuum secondaries, power valve blowout protection, a spread bore flange, and a choke.
( 4 )
$799.95
On Sale
Replace your old carburetor with original Holley performance 4160 carburetors. Budget-minded enthusiasts, like you, will be rewarded with maximum performance from your stock or mildly-modified engine. These Holley 4160 carburetors are easier to tune than full race carburetors with temperamental secondary metering blocks and dual pumps. Plus, they're available in your choice of universal or direct-fit OE replacement versions with all emission provisions. Bolt-on installation and improved performance; no wonder when car guys think of carburetors, they think of Holley 4160 carburetors!
( 260 )
$849.95
Classic Holley carbs have been a staple for rodders around the world for decades. They're the perfect performance upgrade for stock to mildly modified vehicles and have that classic Holley look. Dual feed fuel inlets assure you get all the fuel you need while its vacuum secondaries and electric choke make it amazingly universal. Plus, it is gold dichromate coated for durability and classic Holley looks. Don't trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years.
( 74 )
$899.95
Holley 4160 marine carburetors include all of the same features as their street cousins--plus a few more that make them adaptable and legal for marine use. Primary differences include fuel bowl vent tubes, sealed throttle shafts, and universal marine calibration. Plus, they are designed to meet flooding and backfire requirements as defined by the U.S. Coast Guard. Other than that, they're typical Holley quality all the way, with a square bore flange, vacuum secondaries, single or dual fuel inlets, an electric or manual choke, 30cc accelerator pumps, and a 5 in. airhorn (unless noted otherwise). And last but not least, you can choose between universal or direct fit OE replacement versions.
( 10 )
$899.95
On Sale
Holley Ultra Street Avenger carburetors take your ride from street to strip with amazing out-of-the-box performance. They feature ultra-light aluminum construction for less weight with billet metering blocks and base plates for ultra strength versus cast pieces. With glass fuel level windows in the bowls, vacuum secondaries, and precise fuel metering, these Ultra Street Avenger carburetors offer you ultra-easy, no-trouble adjustments. Amazing performance under the hood deserves an amazing look as well, and the Holley Ultra Street Avenger carburetors, with their shiny tumble-polished finish, along with anodized metering blocks, base plates, and hardware, are the ultimate in cool. Dare to go beyond the limits--power your machine with Holley Ultra carburetors.
( 17 )
$899.95
$808.95
The carburetor gurus at Holley built these carbs with off-roading in mind. Features include maximum low-end torque and horsepower output, steep angle idle, spring-loaded needles and seats, four vacuum ports, and off-road vacuum secondaries. Their one-piece fuel bowl vent tube eliminates fuel spillover during extreme maneuvers, and their unique metering block provides flood-free operation. You'll have exceptional fuel control over rough terrain with the Holley Truck Avenger carburetor best suited for your off-road needs. Other product features include: * Aluminum-construction models available * Gold dichromate finish * Single-feed fuel inlet for ease of installation * Factory, preset electric choke for effortless startups or manual (cable-driven, hand-operated) choke for precise cold start control (depending on application) * Compatible with GM, Chrysler, and Ford A/T kickdown linkage (additional parts may be required) * 100 percent wet-flow tested assuring it arrives ready-to-run
( 15 )
$799.95
On Sale
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 48 )
$999.95
$853.95
—
$949.95
EFI conversions made easy--FiTech Go Street EFI 400 hp systems are true carburetor replacements. And the price is a "Go" as well! Good for up to 400 hp, these 4-injector throttle bodies simply swap out your current 4-barrel carburetor for EFI performance. You don't have to mess with the ignition at all. It's too easy not to go for it--FiTech Go Street EFI 400 hp systems. Features include: * Self-tuning fuel injection * Latest Bosch 4.2 wideband oxygen sensor * ECU is mounted on throttle body * Universal base fits any 4-barrel manifold * Throttle linkage suits most transmissions * Three fuel inlet connections * Voltage control fuel pump control * Wet flow technology * Swirl spray annular discharge design * Built-in fuel pressure regulator * Designed for applications making at least 6 in. of vacuum at idle
( 219 )
$869.00
—
$1,054.99
When it comes to fuel injection versus carburetors, new school is just too cool. FiTech Go EFI 4 600 hp self-tuning fuel injection systems have the ECU mounted on the throttle body for greater self-containment, clean installation, and easy setup. These trick systems fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 600 hp. They feature a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it—and the ability to change air/fuel ratios and ignition timing on the fly. Each system has a hand-held controller with a touch screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. FiTech Go EFI 4 600 hp self-tuning fuel injection systems leave the guesswork behind. Order the model with options best-suited for your application. Additional features: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Adjustable fan control switch * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors * Wet Flow swirl spray annual discharge obtains complete atomization * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor * Designed for applications making at least 6 in. of vacuum at idle
( 257 )
$999.00
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 16 )
$827.95
—
$1,047.95
On Sale
Holley Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (red, blue, or black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs. less than a comparable zinc carburetor. Holley Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as 4 corner idle for precise idle control, mechanical secondaries for great performance, clear fuel level sight plugs for easy, no mess fuel level adjustments, Ford automatic transmission kickdown for use on popular Ford transmissions, four vacuum ports for all necessary vacuum accessories, and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with red, blue, or black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track.
( 81 )
$1,049.95
$808.95
—
$949.95
On Sale
By popular demand, Holley is expanding the draw-thru supercharger carburetor line to now include the 4150 XP Series. Like the existing HP line, these carbs are available in 600, 750, and 950 cfm flow rates—and standard polished with black accents. The feature-laden XPs include a contoured venturi inlet for balanced airflow, screw-in air bleeds for precision-tuning capabilities, high-flow billet metering blocks, billet base plate, and Dominator-style fuel bowls which allow plumbing from either side. Supercharger XP carburetors also have a unique capability that allows their power valves to reference the intake manifold vacuum below the supercharger. This enables the power valve to operate as it should, based off intake manifold vacuum. A power valve provides further enrichment to the main metering system under load (low vacuum) conditions. Holley XP carburetors are the standard for square bore race carburetors. Race-Ready out of the box! Order the model with options preferred for your vehicle. Product details: * Tumble polished shiny finish for good looks * Application-specific blower calibration * Contoured venturi inlet offers balanced airflow for increased horsepower * Screw-in air bleeds for precision-tuning capabilities * Dual accelerator pumps for additional fuel under initial acceleration * Dual feed fuel inlets for constant high-volume fuel delivery * 4-corner idle allows you to precisely control your idle system * Mechanical secondaries for perfect off-the-line launches * Boost referenced power valve for proper enrichment under acceleration * Throttle lever cut off for clearance on a sideways application * 100 percent wet-flow tested by Holley technicians to assure it arrives ready to run
( 1 )
$1,099.95
$988.95
Designed with street and bracket racers in mind, AED HO-Series carburetors offer crisp throttle response, great drivability, and killer acceleration. These carbs feature CNC-machined and deburred main body surfaces, high-flow boosters and metering blocks, four corner idle, a milled choke horn, dual accelerator pumps and vacuum ports, and non-stick, reusable gaskets. All AED carburetors are tested and tuned before shipping, employing their state-of-the-art, planet-leading, computerized "wet-flow bench." They'll provide you with properly matched and balanced fuel delivery and a controlled metering signal and strength, no matter what your speed. HO-Series carburetors are available for aspirated engines, alcohol, blower, and marine applications. AED HO-Series carburetors unite "off-the-shelf" high performance with an affordable price.
( 67 )
$799.95
—
$974.95
On Sale
Holley aluminum Street HP carburetors make tire-smoking performance affordable! They utilize the best features from Holley's Race Bred models but are tamed for street and light competition use, weighing up to 40 percent less and are even easier on your wallet. Each Street HP carburetor features an aluminum contoured main body design with a tumble polished shiny finish and screw-in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability, and maximum performance. A street HP base plate is used so there is plenty of vacuum ports for power brakes, PCV, etc.
( 53 )
$849.95
$763.95
On Sale
To ensure smooth, positive response from your watercraft fuel system, Quick Fuel Technology introduces Black Diamond Marine Series carburetors. The proper blend of air and fuel is critical when you're cruising miles from shore, and the innovative team at QFT has engineered carbs for every street and race application imaginable. Trust their expertise for your boat needs, as well. Depending on the Marine Series carburetor model selected, you can choose single or dual fuel inlets, vacuum or mechanical secondary, primary and secondary jet sizes, and inner and outer air bleed sizes. Quick Fuel Black Diamond Marine Series carburetors feature: * Aluminum fuel bowls with sight glass windows for quick float adjustment * Changeable idle air and high-speed bleeds * PTFE-coated throttle shafts with PTFE bearing ribbons and stainless steel plates * J tubes to prevent spillage * Black Diamond high-temperature satin coating on main body and fuel bowls for enhanced corrosion protection and appearance; coating also provides a 6 percent reduction in fuel temperature * 4-corner idle adjustment (except M-600) * Billet metering blocks with changeable primary idle feed and power valve channel restrictions (except M-600)
( 15 )
$999.95
$898.95
—
$999.95
On Sale
Don't let the budget-friendly price fool you--these Quick Fuel Brawler Street Series carburetors are focused on the performance you want and not the pretty box that it comes in. They feature black anodized billet metering blocks with the latest technology in air/fuel calibrations for today's street or race engine demands. The carburetors also come with black anodized billet throttle base plates for superior durability and throttle shaft stability. Quick Fuel Brawler Street Series carburetors offer all of the options and tunability that you would find from more expensive carburetors in the market, including an electric choke, a beautiful finish, and 4-corner idle adjustment on all mechanical secondary models. They come available in both vacuum and mechanical secondary versions to meet your engine's needs.
( 217 )
$899.95
$808.95
Finally, an affordable high performance race carburetor! Proform's new Race Series mechanical secondary carburetors are hand-assembled in the U.S.A., utilizing a Proform high-flow carburetor main body. Features include adjustable screw-in air bleeds, high performance down-leg boosters, a high rate airflow section design, a solid billet throttle baseplate, and an adjustable secondary airflow cam bracket. They also have timed and full vacuum tubes for accessories and ease of tuning, a welded throttle shaft, button Torx head throttle plate screws, power valve blowout protection, slip link mechanical linkage, and more. What does all this add up too? Easy--dyno proven horsepower and torque gains without breaking the bank!
( 67 )
$794.95
The FiTech Go Street EFI 400 hp self-tuning fuel injection systems with Go Fuel in-tank modules makes it easy to convert your carbureted engine to self-tuning fuel injection at budget-friendly pricing. Good for up to 400 hp, these 4-injector throttle bodies simply swap out your current 4-barrel carburetor for EFI performance on your gas- or E85-powered vehicle. You don't have to mess with the ignition at all. This FiTech system comes with the latest Bosch 4.2 wideband O2 sensor, throttle linkage that suits most transmissions, three fuel inlet connections, and a built-in fuel pressure regulator. This system is designed for applications making at least six inches of vacuum at idle. To make getting fuel easier these FiTech Go Street EFI 400 hp kits also include FiTech's Go Fuel In-Tank fuel pump module. The unique universal design allows you to install the pump in most tanks ranging from 6 to 15 inches deep. The supplied 340 lph fuel pump is compatible with gasoline, E85, ethanol, methanol and alcohol based fuels. Kits include a billet aluminum module with -6AN O-ring boss fittings, 2 different styles of filters, hardware, seals, and terminals.
( 2 )
$1,063.99
On Sale
Does your engine seem like it's always out of breath? Give it a new lease on life and gain some horsepower with Holley high--flow EFI throttle bodies. Made from CNC billet aluminum, they're designed to use the stock TPS and IAC to simplify installation. They include all vacuum ports and linkage required for installation.
( 1 )
$999.95
$898.95
On Sale
Holley EFI LT1 Gen V Hi-Ram intake manifolds provide the ultimate performance with GM direct-injected Gen V 6.2L LT1 engines. The modular design allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper and cross-sectional area to perform in a wide variety of engine configurations. When you look for the pinnacle of performance, price, and quality, look to Holley Hi-Ram intake manifolds for your LT1 application. Features include: * Available with injector bosses on the intake runners that provide increased performance potential by using additional injectors and the factory direct injection * Removable top * Large plenum volume * Intakes with injector ports include fuel rails with dual mounting * Fuel rails are anodized, laser-etched, and machined for -8 AN O-ring fittings at each end * Rear of plenum machined for MAP sensor and three vacuum ports * Head flange has clearance for fuel supply to a high-pressure pump * Increased runner wall thickness for custom porting at the plenum to runner entry on each runner * O-ring seals at cylinder heads and plenum top * Easy assembly with top-mounted screws on plenum top (except front two screws) * Several top options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or blank flange for custom throttle bodies * 3,500 to 8,000-plus rpm power band
( 2 )
$949.95
—
$1,049.95
$853.95
—
$943.95
The Tuning School Atlas Max boost controllers are positive displacement boost controllers that install easily with plug-and-play connections. They take all the features of the Atlas, and put you in control. With the turn of a dial you can control how quickly boost ramps in and by how much. The controller modifies the bypass valve control, utilizing boost/vacuum reference and a MAP sensor, as well as a smart processor, adjusting the ramp in rate of the positive displacement blower. A few simple plug-and-play connections and a small mounting bracket to hold the Atlas in place is all it takes. Turn the dial down and create a slower, smoother transition into boost--great for daily driving. Turn the dial up, and ramp into boost more quickly for that sportier feel. The fine-tuning controls can be mounted inside the cabin, for on-the-fly instant adjustment. Order The Tuning School Atlas Max boost controller designed for your supercharger.
Not Yet Reviewed
$849.00
—
$899.00
On Sale
Edelbrock introduces the all-new XTS manifold for the Ford 7.3L Godzilla engine. These intake manifolds feature shorter-than-stock tapered runners tuned for high-RPM gains in engine swap applications. Finished in a highly attractive black powdercoat, the XTS is designed of lightweight, durable sheetmetal. The flanges are of billet construction for strength and consistent sealing with the heads. A horizontal throttle-body mount solves one of the most common swap fitment issues of intake air routing. All standard vacuum takeoff ports are found on the rear of the manifold, and they come complete with the mounting and vacuum takeoff hardware. Additional notes: * Horizontal throttle body positioning makes inlet plumbing engine swap vehicles very easy * Short tapered runners provide significant high RPM gains, especially when matched with a Comp Cams Stage 3 Godzilla camshaft * Two 1/8 and two 1/4 NPT bosses for extra vacuum takeoff points * Team up the XTS manifold (P/N 7483) with a FAST 102mm throttle body (P/N 54106) and COMP Stage 3 camshaft (P/N 405-205-17) to create a 637 hp beast ready to swap into your favorite ride
Not Yet Reviewed
$1,045.95
$836.76
On Sale
APR throttle body inlet system is a comprehensive upgrade to the factory charge pipe system from the intercooler outlet to the throttle body. APR replaces all the components and provide a new, larger, free flowing system that flows roughly 34 percent more than stock. This was achieved by increasing the cross-sectional area of the system and by reducing the tight radius bend directly in front of the throttle body. This system does away with two potential boost leak points thanks to their single cast design. They have upgraded the intercooler outlet hose to a multiply wire-reinforced silicone design with T-bolt clamps that resist boost leak over the stock counterpart. APR's new billet throttle body to manifold adapter provides a convenient boost and vacuum reference point which can be used to for a gauge or anything else that suits your build. Lastly the system comes complete with new throttle body and intake manifold gaskets, which are common leak points many never know to address.
Not Yet Reviewed
$949.95
$853.95
Chevrolet Performance Holley 4150/4160-style carburetors offer street, strip, towing, and off-road performance for your vehicle. For both small block and big block, these larger cfm Holley carburetors from GM utilize dual-feed center hung float bowls for constant, stable fuel control and they look great with their show-car-quality polished finish. The 4150s are offered with mechanical or vacuum secondaries, while the 4160 styles are all-vacuum secondaries, making them great for a wide variety of vehicles. The carburetors include bolts and gaskets, plus features like a quick-change adjustable vacuum secondary, automatic electric chokes for easier warm-ups, power valve blowout protection, and 4-corner idle adjustment for a more precise idle mixture, depending on the model chosen. Budget-minded enthusiasts can't go wrong with Chevrolet Performance Holley 4150/4160-style carburetors.
Not Yet Reviewed
$991.05
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
