Availability
Turbosmart Gen-V Comp-Gate electronic wastegates are built on the successful, class leading Gen-V Comp-Gate 40 architecture. Starting with a Turbosmart Gen-V wastegate body, you can be confident the mounting orientation will match your existing manifold and outlet hardware. The Gen-V Comp-Gate 40 already had class leading flow capacity and heat handling characteristics. There are no springs, no hoses and no boost reference signal, nor any of the limitations associated with any of them. Gone, are minimum boost levels associated with base spring pressure or the heat related issues with hoses. If your manifold priority is good enough, you can set boost anywhere from zero up to "all of it" from your laptop or tuning interface. Additional features: * Aluminum and cast stainless steel construction * Black anodized finish on top cap * Nitronic 40 valve guide and high-temperature 347 SS body * Liquid cooled, electronic actuator * Strap-type V-band clamps * 1/8 in. NPT * User adjustable actuator position * Onboard analog 0-5 V wastegate position sensor * Onboard analog 0-5 V actuator temperature sensor
Not Yet Reviewed
$981.95
Turbosmart Gen-V electronic anti-lag valves are perfect for motorsport and high-performance applications featuring fully electronic actuation, removing the need for the solenoids and tanks of traditional pneumatic systems. They feature a 40mm valve diameter and purpose designed actuator housing. Multiple fittings are also supplied for ease of fitment and fabrication. The fresh air valve allows incoming charged fresh air from the turbo to be diverted safely into the exhaust manifold pre-turbine wheel with throttle at low opening angles. This allows for safer spooling of the turbocharger without potentially damaging the throttle based late combustion event style anti-lag that can induce high engine stresses and break connecting rods. For engineered performance, choose Turbosmart.
Not Yet Reviewed
$1,091.95
Turbosmart's much anticipated Gen-V electronic wastegates are available in Hyper-Gate (45mm, 120 psi) and Power-Gate (60mm, 80 psi) models. The Gen-V external line introduced modular architecture, allowing a rotatable diaphragm housing, optional water cooling, and the ability to swap actuator housings between gate sizes. These new models offer all the flow and interchangeability—with the kind of control never seen before, independent of any reference signal, without the need for compressed gas or boost lines. They're fully adjustable from your tuning interface; no need for changing springs. Boost control is completely adjustable from your laptop. As boost control strategies become more complex, Turbosmart engineers wanted a solution that maintains all the performance and reliability of the Gen-V range—and adds truly infinite control. These electrical wastegates operate on a current draw while providing fast and efficient boost control against up to 80 psi drive pressure (for the eWG60) and over 120 psi (for the eWG45). As with the Gen-V range, there is a provision for optional water cooling. Order the Gen-V model that best suits your performance needs.
Not Yet Reviewed
$1,023.95
On Sale
When you need an emergency engine shutdown system, these BD Diesel positive air shutdown valves are the solution. Some industries, such as mining, oil refinery, forestry, mobile welding, septic removal, and refueling, require some vehicles to have an emergency engine shutdown in place. The most effective method for this is to cut the air supply to the diesel engine, causing fuel ignition to cease. With these BD Diesel positive air shutdown valves, an inline butterfly valve is placed in the air intake line and, when activated by the included heavy-duty electrical solenoid, the engine will shut down within seconds. The butterfly valve design reduces the number of parts and the overall size, as compared to other competitive units. BD Diesel positive air shutdown valves feature aluminum and stainless components, plus weatherproof electrical connectors that are used to prevent corrosion. Installation is simple--by utilizing the innovative bead boot locks, no welding is needed for the hose retaining beads. Valves are available in automatic or manual switching mode; manual switching models do not include electronic overspeed protection modules.
Not Yet Reviewed
$996.95
The Tuning School Atlas Max boost controllers are positive displacement boost controllers that install easily with plug-and-play connections. They take all the features of the Atlas, and put you in control. With the turn of a dial you can control how quickly boost ramps in and by how much. The controller modifies the bypass valve control, utilizing boost/vacuum reference and a MAP sensor, as well as a smart processor, adjusting the ramp in rate of the positive displacement blower. A few simple plug-and-play connections and a small mounting bracket to hold the Atlas in place is all it takes. Turn the dial down and create a slower, smoother transition into boost--great for daily driving. Turn the dial up, and ramp into boost more quickly for that sportier feel. The fine-tuning controls can be mounted inside the cabin, for on-the-fly instant adjustment. Order The Tuning School Atlas Max boost controller designed for your supercharger.
Not Yet Reviewed
$849.00
—
$899.00
On Sale
Holley Sniper EFI Autolite 1100 fuel injection systems let you convert your classic Autolite 1100 carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI! You can also use the Sniper EFI to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature a 100 lbs./hr. fuel injector capable of supporting 175 hp on naturally aspirated engines. For your high performance needs, look to Holley! Standard Sniper EFI system features: * Bolt-on Autolite 1100 carburetor replacement * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); no laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion kit for 1963-67 Inline 6-cylinder Ford engines from 144 ci. to 300 ci.
( 5 )
$1,099.95
$988.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$1,049.95
$763.95
—
$999.95
On Sale
Holley electronic fuel injectors deliver the performance and quality that you expect when you see the Holley name. They're available either as replacement items to take the place of failed or damaged parts, or as upgrade and tuning items to boost fuel flow when you're cranking up the power in your engine. Many different options are available, including more than a dozen lbs./hr. advertised flow rates. Select the model best suited for your application.
( 44 )
$849.95
—
$999.95
$763.95
—
$898.95
Nick Williams Performance drive-by-wire throttle bodies are precision CNC-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX and LTX performance engines. These throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installed. There is no need to disassemble your factory throttle body. Order the model designed for your vehicle and engine application.
( 21 )
$899.99
—
$959.00
On Sale
These Edelbrock Super Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.
( 10 )
$995.95
—
$1,068.95
These Edelbrock Victor Jr. LS1 carbureted intake manifold packages are capable of supporting up to 600 hp. They accept a standard 4-barrel square bore carburetor. They include an electronic timing control module that picks up MAP, crank position, and cam position in order to drive the stock coil-on-plug ignition system.
( 1 )
$1,077.95
Precision Turbo and Engine high-quality, yet economical PTE wastegates are perfect for the automotive enthusiast looking to get the most from their turbocharged car, truck or any other vehicle. They're available in several relief diameters. Order the PTE wastegate suited to your application. Key features and benefits include: * High-grade, high-temperature stainless steel and billet aluminum for the best in strength, style and functionality at an affordable price * Stainless investment cast valve bodies provide consistent performance without fatigue or failure, while also allowing for accurate boost control * An internal nickel chromium alloy valve * Different 17-7 precipitation hardened springs for further adjustment of boost levels (not water-cooled wastegate) * Standard bolt-style or clamp-style flange (depending on model) configuration for easy mounting * A satin black anodized finish with 6061 aluminum billet cap * May be direct replacement. All are compatible with most aftermarket manual or electronic boost controllers for ease of use * All clamps necessary for installation (not with PW39 model)
( 3 )
$761.59
Precision Turbo and Engine's high-quality yet economical Pro Series Gen2 wastegates are designed specifically for use with CO2-based boost control systems. The wastegates offer quicker response time, accuracy, and durability under the high-pressure demands of CO2 actuation, when compared to standard wastegate designs. The Pro Series Gen2 external wastegates are fully adjustable and features the following: * High-grade, high-temperature stainless steel and billet aluminum construction for strength, style and functionality at an affordable price * A 347 stainless investment cast valve body provides consistent performance without the worry of fatigue or failure, while also allowing for accurate boost control * An internal nickel chromium alloy valve * Three individual ports (2 on the bottom can and 1 on the top can) * Comes complete with stainless steel inlet and outlet flanges * Unique, stabilizing precision pins prevent the inlet/outlet flange from spinning * Several different 17-7 precipitation hardened springs for further adjustment of desired boost levels * Compatible with most aftermarket manual and electronic boost controllers for ease of use * Includes clamps necessary for installation Note: As an added bonus, each Precision Turbo external wastegate is warranted to be free from manufacturer is defect for a period of 12 months or 12,000 miles!
Not Yet Reviewed
$772.79
On Sale
NOS EFI nitrous oxide systems are the easiest path to enhanced performance for your electronically fuel-injected vehicle. Each system is engineered for the exact application and is fully compatible with OEM equipment. These kits are offered in either wet or dry configurations, and will not affect day-to-day driving, fuel economy, or reliability. Premium gasoline or unleaded racing fuel is required. Many options are available; order the system best suited for your vehicle and engine application.
( 2 )
$1,049.95
$943.95
On Sale
These Edelbrock Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.
( 2 )
$1,049.95
On Sale
Choose EFI main power wiring harnesses from Holley to meet your needs. Several choices are offered—TBI, LS applications, multi-point, and un-terminated harnesses—to feed and carry your engine's electrical supply. Get wired for electronic fuel injection with Holley EFI systems main wiring harnesses.
Not Yet Reviewed
$849.95
$763.95
—
$949.95
The FAST Blackout nitrous systems are unprecedented for their looks, performance, and power potential. They incorporate the most technically advanced performance features available, including the patented FAST active fuel control. This feature automatically adjusts nitrous fuel enrichment so that your engine never runs too rich or too lean. FAST Blackout nitrous systems feature a throttle-by-wire compatible electronic TPS switch for system activation at wide-open throttle. Power settings vary for each application-specific kit, and they come complete with the appropriate tuning jets, as well as fuel tap fittings, solenoids, filters, and necessary activation electronics. FAST Blackout nitrous systems feature all-new black powdercoated bottles, carbon-fiber look hoses, and fittings for a variety of carbureted and fuel injected applications. They are perfect for street/strip and all-out drag racing applications. Order your kit today!
Not Yet Reviewed
$796.95
—
$1,106.95
Trick Flow® TFX™ fuel injectors have so many features, it's no wonder that they are considered one of the best aftermarket injectors available! They atomize fuel better, resist clogging, are quieter, and require less energy to operate than other injectors. Low magnetic stainless steel bodies help prevent moisture contamination, and OEM-style clip grooves eliminate possible fuel leaks. Other features include electronically drilled and machined disc-type fuel control valves, improved nozzles and coil windings, and Viton® O-ring seals to prevent air leaks under extreme operating conditions. High-quality, 1/2 micron filter screens keep foreign debris and contaminants from entering the injectors to ensure proper performance and a long life cycle. TFX™ fuel injectors are 100 percent duty cycle tested to ensure reliability and performance. All flow values are at 3 bar (43.5 psi).
( 36 )
$901.99
On Sale
One of the most popular updates for older vehicles is swapping out the carburetor(s) for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and can be difficult to mount properly. Holley Sniper Universal EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They give you the option to install an EFI tank into a vehicle not normally offered. Features include: * Supports up to 550 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Include new tank straps
( 2 )
$949.95
$853.95
—
$876.95
On Sale
FiTech Easy Street 600 hp EFI system fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with one of several inline or in-tank fuel delivery solutions, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Fuel delivery options: * Go Fuel universal in-tank pump modules—255 lph or 340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go Fuel single pump fuel cell module—returnless--340 lph--billet top assembly is machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. The module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware. * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (naturally aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
( 7 )
$1,101.99
—
$1,111.99
$991.79
—
$1,000.79
The Hilborn RAW "Race-And-Win" Injector is the classic racing unit for the standard Gen 1 small block Chevy. Holley offers ram tube kits in D-flared and full-flared versions for Hilborn SBC RAW mechanical and electronic stack fuel injection, as well as other applications requiring a ram tube for 2 3/16 in. and 2 7/16 in. throttle bore injectors. The tubes are available in aluminum (2 1/2 in. I.D.) and steel (2 3/16 in. I.D.) in 8 in. or 12 in. tall sets. Additional notes: * Full-flared inlets for evenly spaced injector throttle bores * Aluminum tube option: Formed from aluminum tubing and tumbled to a dull aluminum finish * Steel tube option: Formed from steel tubing and finished with silver zinc plating
Not Yet Reviewed
$899.95
—
$949.95
Edelbrock Performer Dual-Quad Air-Gap EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator--which are each sold separately.
( 1 )
$779.95
On Sale
The FiTech Ultimate Rebel LS 1000 hp EFI loaded intake manifold kits offer significant performance and convenience benefits for LS engine builds, supporting up to 1000 horsepower. That makes them suitable for both naturally aspirated and boosted applications. The kits are designed to streamline the conversion to electronic fuel injection (EFI), providing a complete, high-performance solution with features like optimized airflow, and precise fuel delivery. Plus, these conversion kits are easy to install. Key benefits of the FiTech Ultimate Rebel LS EFI System: * High-Performance—supports up to 1000 horsepower, making it suitable for both naturally aspirated and boosted applications * Includes all necessary components for a streamlined installation, such as the intake manifold, throttle body, injectors, wiring harness, and sensors * Optimized power delivery—features a long runner intake manifold designed to enhance power in the 1500-6500 rpm range * Increased airflow—the 102mm throttle body ensures ample airflow for improved performance * Precise engine management, sequential fuel and spark control, along with dual wideband O2 sensors, provide accurate monitoring and optimal performance * Boost/Nitrous compatibility—the 3 BAR MAP sensor supports boosted applications up to 30 psi * Enhanced appearance—the redesigned fuel rail bracket and overall cleaner profile contribute to a more refined engine bay appearance * User-Friendly installation—kit is designed for ease of installation, minimizing downtime and complexity * Improved fuel efficiency—optimizes fuel delivery for better fuel economy * Better throttle response—provides a more responsive and engaging driving experience Specific features: * Thicker gauge manifold reduces injection noise for a quieter operation * Redesigned fuel rail bracket enhances the visual appeal of the engine bay * Handheld monitor allows for real-time adjustments and tuning * Magnetic handheld mount provides convenient storage and access to the monitor * Oxygen sensor bung kit for proper sensor installation * Throttle cable brackets ensure proper throttle linkage setup
Not Yet Reviewed
$995.00
$845.75
Sophisticated and technologically advanced, the Turbosmart e-boostHP boost controllers produce a new, increased boost level in six boost groups. They can be correlated to gear, rpm, or elapsed time, plus an auxiliary output such as methanol or nitrous injection. In addition, their high-range MAP sensor design incorporates push lock fittings and high-pressure hoses to ensure durability and relentless performance under a wide range of extreme boost pressures. Electronic boost controllers offer a greater flexibility and countless features, and the eboostHP is capable of handling up to 120 psi of boost pressure with extreme precision.
Not Yet Reviewed
$750.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
