Availability
Showing In Stock Items. Show All 100 Items.
Nitrous Express 4-bolt plate systems for GM LS-style engines feature a billet 90mm or 102mm nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive. Power levels can be adjusted between 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The systems are pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system down the road. (Special note: These kits will work on 2010 and newer Camaros if you rotate the throttle body 180 degrees.) Order the model best suited for your setup. Systems include: * 90 or 102mm nitrous plate * Choice of no bottle, 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Stainless bottle brackets (except no bottle system) * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation
( 3 )
$857.57
—
$945.66
Nitrous Express 3-bolt plate systems for GM LS-style engines feature a billet nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive on all LS car and truck intakes with a 3-bolt throttle body. Power levels can be adjusted between 50, 100, 150, 200, 250, 300 and 350 horsepower. Order the system preferred for your setup. Systems include: * Billet nitrous plate * Choice of 5 lb., 10 lb., 12 lb., or 15 lb. aluminum bottle * Stainless steel bottle brackets * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation
( 6 )
$857.57
—
$945.66
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$752.93
—
$912.93
On Sale
Summit Racing™ induction kit Pro Packs have an Edelbrock Performer RPM intake manifold designed to produce an excellent balance of broad torque, upper-rpm horsepower, and throttle response for the street, with a maximum performance of 1,500-6,500 rpm. To top them off, we've added an Edelbrock Performer 600 cfm carburetor, a 14 in. chrome steel Summit Racing™ air cleaner, zinc plated Summit Racing™ carb studs, a set of ARP black-oxide coated chromoly intake manifold bolts, and a Fel-Pro Printoseal intake manifold gasket set.
( 1 )
$945.86
$861.78
On Sale
NOS Sniper nitrous oxide systems are just what you need for extra horsepower without the high extra cost. Depending on the kit you choose, they're available with jetting for an additional 100 to 250 hp. These systems use a standard industrial-grade type valve on the bottle, have a natural aluminum finish on the carburetor plate, and are available for popular carburetors—including Holley 4150 square bore, 4500 Dominator, and Quadrajet spread-bore styles. NOS Sniper nitrous oxide kits include a distinctive, bright orange 10 lb. capacity nitrous bottle, mounting brackets, aircraft-quality stainless steel braided hose, an injector plate, solenoids, and all other electrical and mounting hardware needed for a complete installation.
( 9 )
$899.95
LS Classic Series classic air cleaner kits come with everything you need to install a GM LS 4-bolt 92mm throttle body (not included) and a 14 in. round chrome air cleaner onto manifolds that have a standard 4150 carburetor square bolt pattern. These kits include a high-quality, cast-aluminum air cleaner base, vintage air cleaner top, 4150 carb adapter plate, throttle body to air cleaner clamp assembly, mounting fasteners, and white paper air cleaner.
Not Yet Reviewed
$790.95
—
$848.95
Standard Motor stock replacement remanufactured turbochargers use quality components to ensure maximum performance. These units are automaker- and vehicle-specific for easy fitment and installation. Most turbos include OEM electro hydraulic control valves, eliminating the need to purchase separate parts. Find the model recommended for your application, then save money with a pre-owned and re-vitalized turbocharger from Standard Motor.
Not Yet Reviewed
$868.99
Summit Racing™ introduces its MAX-efi 500 Fuel Injector System, the most efficient way to convert your carbureted engine to premier EFI performance. These self-tuning throttle body units bolt directly to most 4-barrel manifolds; then, through their wideband oxygen sensor, the systems continually adjust fuel delivery to provide the optimum air/fuel ratio under all climate and altitude conditions. MAX-efi will support up to 500 hp, and the self-learning ECU allows for easy tuning. With safety in mind, these systems are also designed with a self-adjusting "limp home" mode to protect your engine if a sensor fails. In addition, they include a data-logging feature to track the system while it's running to ensure optimal performance. Other features of the Summit Racing™ MAX-efi 500 Fuel Injector Systems: * Powered by the most advanced self-learning technology available * 4-injector system is capable of supporting stock to 500 hp engines * High-flow aluminum throttle body with four 45mm diameter throttle bores * OE-quality wideband 02 sensor and TPS sensor included * Color touch screen hand-held controller * Billet aluminum anodized fuel rails * Compact external ECU for easy mounting * OE-style harness is clearly marked for easy installation and durability in extreme conditions * All sensors except the wideband 02 sensor and coolant temp sensor are integrated on the unit * Uses commonly available sensors for easy replacement if necessary * System uses a Temperature Manifold Absolute Pressure (TMAP) sensor instead of a MAP sensor, reading both air pressure and temperature * Fits square bore or spread bore intake manifolds. (Spread bore manifold requires an inexpensive plate to avoid leaks. See SUM-G1420) * Works with original carb-type distributor, factory-style throttle linkage, and most 4-barrel intake manifolds
( 69 )
$899.99
Edelbrock Performer intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer aluminum intake manifold, an intake gasket set, intake manifold bolts, a carburetor stud kit—and an Edelbrock Performer Series 600 cfm electric choke; a Thunder AVS 650 cfm electric choke; or a Thunder AVS 800 cfm electric choke (depending on your engine C.I.D.). The EnduraShine bright silver chrome finish is optional and resists discoloration from heat; it features a top clearcoat to enhance abrasion and chemical resistance. Edelbrock Performer intakes are designed to deliver improved throttle response over stock intakes. Are you ready for a change? Edelbrock Performer intake manifold and carburetor kits are available for small block and big block muscle car, hot rod, truck, and street vehicle applications.
( 34 )
$971.95
On Sale
Holley Sniper EFI Autolite 1100 fuel injection systems let you convert your classic Autolite 1100 carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI! You can also use the Sniper EFI to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature a 100 lbs./hr. fuel injector capable of supporting 175 hp on naturally aspirated engines. For your high performance needs, look to Holley! Standard Sniper EFI system features: * Bolt-on Autolite 1100 carburetor replacement * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); no laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion kit for 1963-67 Inline 6-cylinder Ford engines from 144 ci. to 300 ci.
( 5 )
$1,099.95
$988.95
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
Designed as a bolt-on replacement for GM's venerable Quadrajet, Holley's 4175 carburetors utilize a front-mounted fuel bowl fitting, allowing you to reuse the stock fuel line. Other features include vacuum secondaries, power valve blowout protection, a spread bore flange, and a choke.
( 4 )
$799.95
The Trinity Series intake manifolds is BTR's latest offering in high-quality cast aluminum intake manifolds for LS7 engines. Their short runner, 3-piece design allows for the ultimate in application flexibility and is similar in concept to billet intakes costing thousands more. Optimum operating range is 6000-8500 rpm and is primarily intended to bridge the gap between N/A and Boosted applications. These intake manifolds utilize the high LT1 throttle body position and accepts DBW or cabled throttle bodies, yet will fit in the tight confines of the C7, C6, C5 Corvette, as well as the popular F-body platforms. BTR Trinity Series intake manifolds come semi-assembled and includes all hardware required to bolt it on. Additional features: * Available in choice of silver or black satin texture powdercoat finishes * Design incorporates two runners and an interchangeable plenum * Both the port mouth radius and the port match are CNC-machined * Seal is generated by eight entrapped O-rings at the runner/plenum interface and is clamped by M6 stainless steel socket head cap screws * Port seals are achieved SAE O-rings seated in a dovetailed O-ring groove * Incorporates two ports on the side of the throttle body boss and on the rear * Runners and plenums can be purchased separately
( 1 )
$824.99
—
$999.99
On Sale
Replace your old carburetor with original Holley performance 4160 carburetors. Budget-minded enthusiasts, like you, will be rewarded with maximum performance from your stock or mildly-modified engine. These Holley 4160 carburetors are easier to tune than full race carburetors with temperamental secondary metering blocks and dual pumps. Plus, they're available in your choice of universal or direct-fit OE replacement versions with all emission provisions. Bolt-on installation and improved performance; no wonder when car guys think of carburetors, they think of Holley 4160 carburetors!
( 260 )
$849.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$1,049.95
$763.95
—
$999.95
On Sale
Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings
( 2 )
$999.95
$898.95
On Sale
FiTech Easy Street 600 HP self-tuning fuel injection systems deliver high performance—and style! Their gold finish is the perfect way to spice up that monster motor, giving it an old-school look. And, like all FiTech EFI systems, the Easy Street 600 HP is a self-learning, plug-and-play system that features an ECU mounted directly to the throttle body for simplified wiring and an easy installation. Examine the options and select the model best suited for your vehicle. Features of the Easy Street EFI-600 HP system include: * Annular discharge * Windshield mount for control * Four 80 lb. flow matched injectors * Extreme self-learning for a wide range of super-fast dial in connections * Suitable for crate engines and performance engines * Pre-programmed with bolt-n-go technology for out-of-the-box performance with minimal input required * Easy Tach input, reads Tach signal from COIL, HEI, CDI, and many other ignition brands (no timing control) * For non-boosted engines; natural aspirated applications only * Wide band oxygen/ sensor with mounting kit * On-board fuel pump driver with PWM * Hand-held module for performance tuning * One fan control * Compatible with E-85 gasoline
( 35 )
$926.00
$833.40
On Sale
Performance Design XS intake manifolds break the mold of existing intake manifold architecture to maximize available space under the hood. When designing the optimum intake runner length and shape, the fuel rail gets in the way—so they moved it—inside the intake manifold! Those billet fuel rails feature an external quick-disconnect near the stock location. Testing proved these models, featuring injection-molded, glass-reinforced nylon construction, made horsepower and torque gains on a stock engine—with increasing gains as the engine got more aggressive with camshaft and exhaust upgrades! Other product features and specifications include: * Modular runners with three staggered lengths for best performance * Forward-facing throttle body flanges (90-101mm, 103mm, and 112mm) * Full assembly can be reversed on the engine * Fits under the cowl hood of a C6 Chevy Corvette * Factory MAP sensor location * PCV and canister purge solenoid OEM connections * Accepts standard EV6 LS3/LS7-style injectors * Injector extension wires pass through sealed grommets * Maximum recommended boost is 20 psi * Carbon fiber center bolt cover * Includes stainless steel hardware for installation * Includes molded port, plenum, and throttle seals
( 1 )
$999.99
$899.99
Halletch Hornet cold air intake kits are designed for the C8 Corvette Stingray Coupe. These direct CAI replacements require no modifications and no tuning. They're dyno-tested for a 17+ increase in horsepower and 25+ increase in torque. Additional product details: * The stainless backplate ensures all harness fasteners and the antenna are attached in their factory locations * You will reuse your stock t/b connector hose, pcv fitting, left and right inlet ducts, and mounting bolts * The huge filter has nearly 1,000 square inches of filtration * Our molded-in velocity stack and reverse flow partition ensures laminar flow at the MAF sensor * Filter box is made from military-grade XLPE * Patent pending * Engineered and designed for the coupe (will not fit the hard top convertible without slight modifications to the cover under the trunk carpet)
( 1 )
$795.00
On Sale
FASS Fuel Systems Titanium Signature Series fuel/air separation systems are a beneficial upgrade for your diesel engine. Titanium systems feature compact designs, powerful motors for improved fuel flow, and advanced filtration that's far superior to your factory fuel filter. Their diesel fuel lift pumps are engineered to be top performing, reliable, long-lasting units—and are backed by a limited lifetime warranty on all light-duty diesel applications. The Signature Series also features FASS revolutionary Whisper Technology that effectively and drastically reduces the sound levels of these diesel systems to a "whisper," while at the same time increasing fuel flow rates. Whether stock or highly modified, FASS Titanium Signature Series diesel fuel systems are available to handle your engine's horsepower. Features and benefits: * Systems available with flow rates up to 290 gph * Advanced filtration removes water, air, vapor, and debris with a filtration rating of 2 micron * Smoother engine idle * Protects and extends the life of your injectors * Whisper Technology (FWT)—reduces noise levels without reducing flow rates * Performance Radius Cuts (PRC)—advanced machining technique creates smooth cuts within aluminum housing * Improved fuel volume delivery * Mass Flow Return (MFR)—technology used to continually "polish" your fuel by keeping positive pressure on fuel being delivered to your engine, guaranteeing the cleanest fuel possible. Also prevents cavitation, along with galling and scoring. * Improved cold weather starts * Decreases carbon monoxide and carbon dioxide emissions * Easier bolt-on bracket mounts do not require any drilling or welding to mount new pump * 1/2 in. fuel lines and ports * Fuel mileage improvement * 30,000 mile filter life expectancy
( 58 )
$799.00
—
$849.00
On Sale
Holley EFI Coyote Hi-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on Ford Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finishes, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The aggressively designed Hi-Ram is constructed in a two-piece design to accommodate for air to water intercoolers and feature up to 20 percent more plenum volume versus Ultra Lo Rams. This manifold design is only offered in an oval throttle body configuration. Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup * Two 1/8 NPT ports on all manifolds. Two 3/8 NPT ports on all manifolds
( 1 )
$899.95
—
$927.95
$799.95
—
$834.95
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
—
$949.95
$799.95
—
$853.95
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$780.00
—
$959.00
ICT Billet intake manifold adapters mate cylinder heads to intake manifolds or supercharges. They are offered to adapt a variety of cylinder heads and intakes. The plates are made from aerospace-grade 6061 T-6 billet aluminum. The kits come with adapter plates and O-ring seals. Depending on the specific application, different length intake manifold bolts may be required (not included).
( 8 )
$839.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
