Availability
Showing In Stock Items. Show All 84 Items.
On Sale
Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold
Not Yet Reviewed
$1,299.95
$844.95
DeatschWerks top-feed conversion fuel rails are designed to convert side-feed applications to top-feed. Many performance vehicles manufactured between 1991 and 2006 came from the factory with side-feed injectors. The benefit of the modern top-feed injectors is that they are easier to tune, less expensive, and flow more fuel than side-feed alternatives. These vehicle-specific fuel rails are sold in pairs. DW also offers upgrade conversion kits that come with injectors ranging from 750cc to 2200cc and are engineered as a system where injector, rails, and mounting hardware that work together to integrate flawlessly into the OE manifold and mounting points. Select the fuel rails or the upgrade conversion kit recommended for your application.
Not Yet Reviewed
$799.00
—
$989.00
Fit your racer with ATL Sports Cell fuel cells—they offer fire safety in the advent of an on-track incident. These Aero Tec fuel cells feature a molded, seamless hard rubber FT3-rated bladder with excellent resistance to most fuels, and they have safety-foam baffling for slosh and explosion suppression. A powdercoated, 20-gauge steel box holds the bladders, also acting as an impact deflector and flame shield. Contain your fuel load with Sports Cells from ATL—the safety people whose priority is helping you to walk away and race another day! Other product features include: * A variety of dimensional sizes, capacities, fittings, add-ons, and colors to fit your needs * Deformable, crash-resistant bladder with composite nut-ring * Billet aluminum cap with flap-type roll-over valve * -6 AN vent-check roll-over valve and return fitting * (2) "duck foot" pick-ups with fuel traps and filters
( 1 )
$939.99
—
$1,063.99
Performance Design Carbon HR intake manifold lids offer owners of the Holley Ram intake models a lightweight. carbon fiber plenum upper. These top sections reduce weight, reduce heat soak, and add a unique engine aesthetic with the exposed weave cloth. Constructed from high-strength carbon fiber with high-temperature epoxy and bonded with high-temperature aerospace structural adhesive, each unit saves approximately 3 lbs. of mass versus the cast original lid. With a matching bolt pattern, the carbon plenum uppers will bolt to any existing Holley Hi-Ram, Mid-Ram, or Lo-Ram cast lowers. The throttle is moved up and rear-ward to improve the flow transition into the plenum and facilitate the carbon process. Order the model designed for your application needs. Other product features and specifications include: * Billet throttle body flange (90-105mm) * Plenum can be reversed on the Holley Ram lower * Carbon fiber-wrapped foam core plenum flange
Not Yet Reviewed
$899.99
Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life
( 8 )
$819.00
—
$850.50
Shoot for best-in-show quality under your hood with the addition of March Performance Revolver billet air cleaners. These finely crafted billet aluminum cleaners are available in a choice of finishes to match and complement your other Revolver components. An air filter and billet hold-down are included with each air cleaner. You're sure to score top honors with your stylish March Revolver billet air cleaners.
( 1 )
$907.99
—
$1,013.99
Keep your show-quality style on track with the addition of March Style Track billet air cleaners. What better way to top your Style Track engine bay than with a matching air cleaner? These exceptionally styled cleaners are designed in billet aluminum with a choice of finishes. An air filter and billet hold-down are included with each air cleaner. It's a beautiful billet show every time you pop the hood thanks to March Style Track air cleaners.
( 4 )
$779.99
Precision Turbo and Engine high-quality, yet economical PTE wastegates are perfect for the automotive enthusiast looking to get the most from their turbocharged car, truck or any other vehicle. They're available in several relief diameters. Order the PTE wastegate suited to your application. Key features and benefits include: * High-grade, high-temperature stainless steel and billet aluminum for the best in strength, style and functionality at an affordable price * Stainless investment cast valve bodies provide consistent performance without fatigue or failure, while also allowing for accurate boost control * An internal nickel chromium alloy valve * Different 17-7 precipitation hardened springs for further adjustment of boost levels (not water-cooled wastegate) * Standard bolt-style or clamp-style flange (depending on model) configuration for easy mounting * A satin black anodized finish with 6061 aluminum billet cap * May be direct replacement. All are compatible with most aftermarket manual or electronic boost controllers for ease of use * All clamps necessary for installation (not with PW39 model)
( 3 )
$761.59
Injector Dynamics ID1300x fuel injectors are high-flow models with characteristics specific to the needs of motorsport tuners. You get superior flow without sacrificing idle and cruising performance in low fuel demand situations. This perfect balance between reliability and performance makes the 1300x Series one of the most popular options in today's motorsports. These injectors not only work with gasoline, but any ethanol fuels your engine is tuned for. The stainless internals prevent corrosion, add durability, and provide dependable flow in high performance engines. Order the ID1300x fuel injectors recommended for your vehicle.
( 1 )
$936.60
—
$966.00
On Sale
Brothers Trucks fuel tanks are the result of a creative solution for an easy under bed gas tank conversion when you want to move the classic or vintage stock setup from in or near the cab. They combine a Brothers tank with appropriate hardware for easy installation. While modifications are required for the new fill neck location, in most cases, the rear frame crossmember is unaffected by this installation. Increase the safety factor of your classic truck or SUV with an assist from Brothers Trucks fuel tanks. More product features and specifications include: * Classic applications model includes straps, lock ring, and hardware * Vintage applications model includes special mounting brackets and will require an application-specific sender (original spare tire crossmember removal may be required)
( 1 )
$875.95
DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.
( 66 )
$819.00
Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.
Not Yet Reviewed
$789.95
Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!
( 2 )
$789.95
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
Edelbrock Performer intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer aluminum intake manifold, an intake gasket set, intake manifold bolts, a carburetor stud kit—and an Edelbrock Performer Series 600 cfm electric choke; a Thunder AVS 650 cfm electric choke; or a Thunder AVS 800 cfm electric choke (depending on your engine C.I.D.). The EnduraShine bright silver chrome finish is optional and resists discoloration from heat; it features a top clearcoat to enhance abrasion and chemical resistance. Edelbrock Performer intakes are designed to deliver improved throttle response over stock intakes. Are you ready for a change? Edelbrock Performer intake manifold and carburetor kits are available for small block and big block muscle car, hot rod, truck, and street vehicle applications.
( 34 )
$971.95
—
$1,062.95
Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings
( 2 )
$999.95
—
$1,049.95
Old school looks, modern performance, and advanced manufacturing all rolled into one—Trick Flow's® R-Series Tunnel Wedge intake manifold for Ford 390-428 delivers just that. Part of the original Tunnel Wedge's cool factor was its appearance, so Trick Flow® took special care to match the looks of the legendary OEM version while improving upon its performance. Trick Flow® was able to maintain the original carburetor locations—but on the inside of the manifold, Trick Flow® overhauled the port design for more airflow and incorporated a new O-ring sealed bottom plate. Cast in premium-grade A319 aluminum, the manifold is topped with carb flanges machined for original Ford FE Tunnel Wedge-style square bore carburetors. Mounting hardware is included.
( 4 )
$999.99
Today's aftermarket world makes it easy to pick up the phone and order 1000 HP for your street car. This has created several challenges for fuel delivery, ranging from hot fuel handling to pump noise. Aeromotive Dual Phantom Fuel Systems have been designed to solve this problem. They come loaded with two Aeromotive Stealth 340 lph fuel pumps, an additional set of electrical bulkheads, and a larger capacity foam and bladder. The pumps provide opportunity for supporting big power (see power ratings below) while remaining OEM quiet. Separate electrical bulkheads allow for an "on demand" fuel system, which reduces the amount of returned fuel and reduces the tank temperature, making vapor lock and cavitation a thing of the past. Also, this feature is a must when a redundant (back up) pump is needed in extreme conditions, such as off-road, desert, and endurance racing. The larger capacity foam and bladder combat fuel slosh while retaining enough fuel to feed the dual pumps. And the best feature is all of this done from your stock tank with no welding or fabrication! Features: * Two 340 lph Stealth fuel pumps * Supports up to 1400 HP EFI with forced induction, 1700 HP EFI naturally aspirated, 1700 HP Carbureted with forced Induction and 2000 HP carbureted naturally aspirated * Black anodized top hat * Four ORB-06 Ports – two supply, one return, one vent * Larger capacity fuel resistant baffle/basket (includes foam and bladder) * Two universal high flow pre-pump filters * Modular design can be cut to height to fit almost any fuel tank * EFI or Carbureted * Turbine pump mechanisms increase durability
( 7 )
$851.00
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$786.95
—
$949.95
On Sale
Holley LS Modular Lo-Ram EFI intake systems have a top-feed plenum entry configuration, designed to allow the currently available Hi-Ram 105mm plenum tops to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications and was conceived to package with an air-to-water plenum-mounted intercooler—with a shorter overall height than is possible with other existing intake manifolds. Using a modular design, the top-feed plenum configuration with 105mm top keeps the overall height at just 9.07 in.! Additional features and specs include: * Cast aluminum construction * Modular design allows the use of the included top-feed plenum entry * Designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads * Will also work with OE or aftermarket cylinder heads * Designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000 to 8,000 rpm, depending on application * Low height to aid the packaging of a plenum-mounted air-to-water intercooler in a top-feed configuration (or to fit under a stock or mildly modified hood in the front-feed configuration) * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits come with two sets of brackets—a set for long (usually standard length) fuel injectors, and a set for short (such as Pico or LS7) fuel injectors
( 1 )
$1,049.95
Trick Flow® R-Series A460 Tunnel Ram Intake Manifolds were developed for all 8,000 plus rpm applications such as drag racing and tractor pulling. They feature a 2-piece design with interchangeable top covers so you can mount either single or dual Dominator-style carbs. They're made from thick-wall A319 aluminum for durability and the lower manifold feature bosses for nitrous and fuel injection nozzles. The lower manifold and top covers are sold separately; both pieces are required to make a complete manifold assembly. R-Series A460 manifolds can only be used with Trick Flow® PowerPort® A460 series cylinder heads.
( 2 )
$849.99
On Sale
Holley fuel cell EFI pump module assemblies are the easy way to upgrade your racing fuel system! And even though the name includes EFI, the modules can also be used as an upgrade for carbureted systems, with the proper regulator. Designed as drop-in direct replacements for your existing 6 or 12-bolt flange fuel cell cap assembly, the billet top flange includes an 8 AN inlet port, a 10 AN outlet port, and a fuel filler cap. They offer a fully adjustable fuel pump depth from 7.5 in. to 12 in. deep, and the modules are available in single or dual 255 lph and 450 lph fuel pump configurations. Holley fuel cell EFI pump module assemblies include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Order the model that best suits your application.
( 6 )
$799.95
—
$828.95
Holley EFI LS Hi-Ram intake manifold bases are cost-effective alternatives to fabricated sheet metal for high performance applications where induction system height is not limited. Coupling these cast aluminum Hi-Rams with the high flowing LS-style cylinder heads has outstanding potential for N/A and forced induction applications at a budget-minded cost. These modular lower manifolds accept a wide range of carbureted and EFI tops, making them attractive to builders and fabricators as the perfect foundations for custom induction systems. Fuel rails are included and machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. The aggressive, bold, race-bred styling of Holley GM LS modular Hi-Ram lower manifolds will make bad intentions clear for drag race, muscle car, marine, off-road, sand rails, pulling trucks, track, and street-rod applications.
( 1 )
$899.95
aFe Track Series Red Kevlar® Carbon Fiber Pro 5R air intake systems are the pinnacle of innovation in open-element intakes. Designed using cutting-edge technology and crafted with premium materials, they undergo rigorous testing to ensure peak performance, and showcase a one-piece housing that shields from elements and heat, while seamlessly fitting into the engine bay. The highlight of the Track Series is their meticulously CAD-designed carbon fiber intake tubes. The tubes in these aFe kits have a unique red Kevlar® twill weave carbon fiber that is visually striking and lightweight, delivering exceptional performance and a captivating induction sound. Along with the massive Pro 5R 36-degree radial flow air filter and the one-piece XLPE polymer housing, the aFe Track Series Red Kevlar® Carbon Fiber Pro 5R air intake systems have the performance and style you'll love. Features and benefits: * Dyno-proven gains * Outflows factory intakes * Unique carbon fiber with red Kevlar® intake tube * XLPE (cross-linked polyethylene) polymer housing minimizes warm engine air for maximum performance * Open element design showcases air filter and delivers an aggressive air intake sound * Built-in air intake scoop to capture cold air directly from the top of radiator support * Washable and reusable black Pro 5R air filter for maximum performance with carbon fiber top * Premium stainless steel clamps and silicone couplings provide a secure seal * Utilizes factory mounting locations for an easy and secure installation
Not Yet Reviewed
$940.80
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
