Availability
On Sale
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$774.86
$706.98
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$724.93
—
$734.93
On Sale
Summit Racing™ intake manifold and installation Pro Packs are now all in one part number. With Summit Racing™ intake manifold and installation Pro Packs, you can get your satin-finished, square-bore intake, plus all of the installation items that you need to finish the job, and save time and money! These Pro Packs also include Loctite black RTV sealant.
( 42 )
$568.89
$512.89
—
$744.34
Rhodes Race Cars fuel pump modules will convert your fuel setup to fuel injection or switch to an internal pump—and they do it with style. These pump modules from RRC are easy to install; simply unbolt your cap, install the module, hook up your power and ground wire, plumb your fuel system, and you're ready to go. There's no need for any modifications to your fuel cell. Rhodes Race Cars fuel pump modules are available in different LPH with attractive black, red, or blue caps—and will include all necessary hardware and full instructions. Choose either single or dual-style module with or without pump.
( 7 )
$599.95
On Sale
Holley fuel cell EFI pump module assemblies are the easy way to upgrade your racing fuel system! And even though the name includes EFI, the modules can also be used as an upgrade for carbureted systems, with the proper regulator. Designed as drop-in direct replacements for your existing 6 or 12-bolt flange fuel cell cap assembly, the billet top flange includes an 8 AN inlet port, a 10 AN outlet port, and a fuel filler cap. They offer a fully adjustable fuel pump depth from 7.5 in. to 12 in. deep, and the modules are available in single or dual 255 lph and 450 lph fuel pump configurations. Holley fuel cell EFI pump module assemblies include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Order the model that best suits your application.
( 6 )
$828.95
$583.95
—
$745.95
Garrett turbine housings can restore the efficiency of your turbo. When your housing shows signs of wear and tear, to avoid damage to other turbocharger components and loss of performance, replace it. Garrett offers a considerable selection of turbine housings in different volute types, materials—and in a variety of A/R and flange configurations to effectively direct exhaust gases into the wheel to gain the performance you desire. Whether you're replacing or upgrading, switching inlet/outlet options or changing A/R sizing, you can count of Garrett turbine housings to assist with your engine-boosting power project.
Not Yet Reviewed
$552.73
—
$590.29
You can give small block Chevys the nostalgic look of days gone by, as well as a healthy dose of performance, with Edelbrock's Three-Deuce intake manifolds. The balanced, 180 degree firing order arrangement of their port runners produces a broad power band that runs from idle up to 5,500 rpm, for power where you need it. In addition, they have a cast-in exhaust-gas heat riser and a front boss for an oil filler tube.
( 4 )
$545.95
On Sale
Edelbrock Ford flathead intake manifolds are designed to give your flathead engine more power. They are made of aluminum and feature a natural finish. The intakes are available for dual carburetor 1938-48 engines or in a single 4-barrel version for 1949-53 engines.
( 1 )
$519.95
—
$703.95
These Mishimoto intercooler hose kits have been designed for making connecting your intercooler easy. They feature hoses manufactured from a combination of high-grade silicone and heat-resistant embedded fibers to handle high temperatures and additional boost pressure. Each hose has a smooth interior surface to deliver increased airflow to your intercooler. The kits are available in black, red, or blue and retain OEM fitment, while providing increased pressure tolerance, for the ultimate upgrade in performance and style.
( 3 )
$708.95
Offenhauser 360 Degree Equa-Flow intake manifolds are a unique model often used as replacements in classic cars from the 1950s and '60s. As noted, these aluminum dual-quad units can be drilled to accommodate 3- or 4-bolt carburetors.
Not Yet Reviewed
$651.99
These BD Diesel intercooler hose kits will bolt directly onto your intercooler and truck without any modifications. BD Diesel intercooler hose kits include silicone hose couplers and aircraft-style T-bolt clamps to hold the hose in place. The kits are available for the Dodge Cummins, Ford Powerstroke, and GM Duramax diesel engines. If you're looking to install an intercooler, choose one of these BD Diesel intercooler hose kits to complete the job.
( 11 )
$525.95
On Sale
FASS Fuel Systems Titanium Signature Series fuel/air separation systems are a beneficial upgrade for your diesel engine. Titanium systems feature compact designs, powerful motors for improved fuel flow, and advanced filtration that's far superior to your factory fuel filter. Their diesel fuel lift pumps are engineered to be top performing, reliable, long-lasting units—and are backed by a limited lifetime warranty on all light-duty diesel applications. The Signature Series also features FASS revolutionary Whisper Technology that effectively and drastically reduces the sound levels of these diesel systems to a "whisper," while at the same time increasing fuel flow rates. Whether stock or highly modified, FASS Titanium Signature Series diesel fuel systems are available to handle your engine's horsepower. Features and benefits: * Systems available with flow rates up to 290 gph * Advanced filtration removes water, air, vapor, and debris with a filtration rating of 2 micron * Smoother engine idle * Protects and extends the life of your injectors * Whisper Technology (FWT)—reduces noise levels without reducing flow rates * Performance Radius Cuts (PRC)—advanced machining technique creates smooth cuts within aluminum housing * Improved fuel volume delivery * Mass Flow Return (MFR)—technology used to continually "polish" your fuel by keeping positive pressure on fuel being delivered to your engine, guaranteeing the cleanest fuel possible. Also prevents cavitation, along with galling and scoring. * Improved cold weather starts * Decreases carbon monoxide and carbon dioxide emissions * Easier bolt-on bracket mounts do not require any drilling or welding to mount new pump * 1/2 in. fuel lines and ports * Fuel mileage improvement * 30,000 mile filter life expectancy
( 58 )
$669.00
—
$729.00
$602.10
—
$656.10
On Sale
Replace your old carburetor with original Holley performance 4160 carburetors. Budget-minded enthusiasts, like you, will be rewarded with maximum performance from your stock or mildly-modified engine. These Holley 4160 carburetors are easier to tune than full race carburetors with temperamental secondary metering blocks and dual pumps. Plus, they're available in your choice of universal or direct-fit OE replacement versions with all emission provisions. Bolt-on installation and improved performance; no wonder when car guys think of carburetors, they think of Holley 4160 carburetors!
( 260 )
$599.95
—
$728.95
Halltech Killer Bee MF103 cold air intake kits offer bolt-on horsepower and torque for your C6 Corvette. These performance induction systems require no additional tuning, however, if you choose to tune, you can expect 31 to 35 RWHP. Killer Bee systems include Halltech's Beehive heat shield that isolates the air filter and MAF sensor from the incredible heat of the engine bay, and they feature a forward design of the mass airflow sensor and velocity stack for improved idle manners. Halltech CAD-designed, plug-and-play Killer Bee induction systems also feature strong and durable XLPE poly construction. They are offered in black or red to complement your red fuel rail covers, and come with stock (OEM size) throttle body and connector hose with PCV hole, or you may choose NW (Nick Williams) throttle body and connector hose with or without PCV hole. Killer Bee systems also work with Corvette Carbon Editions.
( 3 )
$619.99
Summit Racing™ drive-by-wire throttle bodies are a perfect upgrade for any late model LS/LSX engine. They're precision-machined from 6061 billet aluminum and come in multiple finishes. The unique blade design allows these throttle bodies to bolt right up to any factory or aftermarket LS/LSX intake manifold—and they utilize the original late model GM 6-pin connector. Their larger bore size allows for increased airflow, which results in fast, smooth acceleration across all RPM ranges. The proprietary electronics and stepper motor allow these throttle bodies to be used on both naturally aspirated and forced induction engines. Tuning is required for installation.
( 7 )
$601.99
—
$621.99
On Sale
FiTech has partnered with TANKS Inc. to make your EFI upgrade even easier with a comprehensive line of new FiTech Go EFI fuel tank kits. Fuel injection demands higher pressure from an electric fuel pump, and the best place to mount a pump is in the gas tank. FiTech's in-tank module is supplied with a 340 lph fuel pump to support up to 800 hp. The fuel pumps bolt directly into the tank's recessed mount, providing a modern EFI solution for hot rods, classic trucks and muscle cars. FiTech Go EFI fuel tank kits also include the following: * Direct-fit tanks feature internal baffles for constant fuel delivery * In-tank pump module secures the supplied 340 lph pump in the tank * -6 AN inlet/outlet that provides leak-free fuel line connections * Recessed sending unit and pump mount that provides added clearance
( 23 )
$638.00
—
$713.00
$574.20
—
$641.70
On Sale
Holley LS split design carbureted intake manifolds are single-plane racing units designed with performance in mind. They feature a race-bred, 2-piece split feature that was previously only found on the most expensive race intakes. The manifolds will fit GM LS Gen III engines with cathedral port heads—and are intended for 4150-style square bore flanged carburetors or throttle body EFI. The LS Race single-plane intake manifold was designed for high performance/racing engine applications, 5.3 to 6.2+ liter displacement—and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the rpm spectrum, while providing maximum performance up to 7,000 rpm. Features include: * Maximum performance race design with hood clearance consideration * Lighter than other split race intakes * Split feature allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap * Shoulder bolt locators and O-ring seal make reassembly simple and precise * 33 to 50 percent the price of other split race intakes * Vacuum port options: Two 1/8 in., one 1/4 in., and one 3/8 in. NPT ports at the carb flange
( 6 )
$725.95
$583.95
—
$749.95
When you decide to put a bottle under your hood, you want performance that makes you go fast; you expect durability for consistent, safe performance and, if at all possible, a good value. Proton Plus Series nitrous systems from Nitrous Express combine your wants and needs in a compact and easy-to-mount module. Constantly researching and developing to provide you with safe, reliable nitrous systems, Nitrous Express Proton Plus Series systems will exceed your expectations. These nitrous systems contain high-quality solenoids that are capable of producing 150 hp to the wheels, and their black anodized aluminum housing not only looks great, but it also pulls heat away from the solenoids for extreme durability. Proton Plus Series nitrous systems include jetting for 35, 50, 75, 100, 125, and 150 hp. They are available without a bottle or in three bottle sizes, including a lightweight 10 lb. composite bottle with an aluminum high-flow Lightning 45 bottle valve and stainless bottle brackets. Live and dream nitrous oxide with Nitrous Express--the people who are passionate about nitrous oxide. Additional features include: * Single Shark nozzle * Nozzle adapter * Stainless braided nozzle lines * Extra-long braided stainless feed line * Stainless fuel line * Master arming switch * Wide-open throttle switch * 40 amp relay * Relay harness * Every nut, bolt, and electrical connector needed to complete the installation
( 26 )
$527.86
—
$669.38
BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
( 1 )
$569.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$799.95
—
$949.95
$522.95
—
$718.95
Aeromotive A1000 Stealth fuel pump assemblies provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these assemblies use O-ring clamps to positively seal the provided tube to both the filter pickup and the pump inlet, allowing for perfect placement of the pickup to ensure superior performance! Aeromotive A1000 Stealth fuel pump assemblies are constructed for cool and quiet operation. They feature a 100 micron stainless steel fuel filter, pickup, gaskets, a mounting ring, bolts, and washers for an easy installation.
( 2 )
$735.50
On Sale
Developed with performance in mind, Holley EFI LS single plane split-design race intake manifolds feature a race bred, 2-piece split design that was previously found only on the most expensive race intakes. These manifolds will fit GM LS Gen III engines with cathedral port heads for high performance/racing engine applications with 5.3 to 6.2 liter displacement and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. The single-plane design provides optimal performance across the rpm spectrum, while the split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, makes custom porting and matching a snap. Shoulder bolt locators and an O-ring seal makes reassembly simple and precise.
( 4 )
$821.95
$628.95
—
$738.95
On Sale
FASS Fuel Systems Titanium Series fuel/air separation systems offer benefits your diesel shouldn't be without. Titanium systems feature compact designs, powerful motors for improved fuel flow, and advanced filtration that's far superior to your to your factory fuel filter. Their diesel fuel lift pumps are engineered to be top performing, reliable, long-lasting units and are backed by a limited lifetime warranty on all light-duty diesel applications. These systems also feature FASS Silencing Technology that effectively reduces the noise created from fuel/air separation lift pumps; this is accomplished through machining techniques, tighter tolerances on all gears, and a high-quality military spec coating over the aluminum base. Whether stock or highly modified, FASS Titanium Series diesel fuel systems are available to handle your engine's horsepower. Features and benefits: * Systems available with flow rates up to 260 gph * Advanced filtration removes water, air, vapor, and debris with a filtration rating of 3 micron * Smoother engine idle * Protects and extends the life of your injectors * Silencing Technology (FST)—reduces noise levels without reducing flow rates * Performance Radius Cuts (PRC)—advanced machining technique creates smooth cuts within aluminum housing * Improved fuel volume delivery * Mass Flow Return (MFR)—technology used to continually "polish" your fuel by keeping positive pressure on fuel being delivered to your engine, guaranteeing the cleanest fuel possible. Also prevents cavitation, along with galling and scoring. * Improved cold weather starts * Decreases carbon monoxide and carbon dioxide emissions * Easier bolt-on bracket mounts do not require any drilling or welding to mount new pump * 1/2 in. fuel lines and ports * Fuel mileage improvement * 30,000 mile filter life expectancy
( 3 )
$699.00
—
$729.00
$629.10
—
$656.10
Demon Carburetion Shadow Black Street Demon carburetors redefine the fuel/air mixer with an all-new black ceramic coating which acts as a protective barrier to heat and corrosion. They offer car enthusiasts a straightforward design to deliver stable idle, amazing throttle response, and smooth performance. With optimized calibration and a dual-mounting pattern, they are ready to run … right out of the box! The carburetors feature an integrated fuel bowl/main body design, with the gasket above fuel level, and no plugged passages--eliminating all potential leak paths. They include small 1 3/8 in. primary throttle bores, combined with proven triple-stack boosters, to facilitate crisp throttle response and drivability. Other specs and benefits: * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * 625 cfm airflow * Dual-mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 8 )
$649.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
