Availability
Edelbrock's Performer carburetors feature 2-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves—and the primary venturi booster is a bottom-feed design for smoother acceleration and better drivability. An Owner's Manual is included with every Edelbrock carburetor. The manuals consist of two sections: Section 1, Theory of Operation and tuning procedures which will help you be prepared to develop your own individualized calibration. Section 2, Tuning procedures will take you through a step-by-step procedure that will enable you to achieve a desirable calibration. For added ease of tuning, a Calibration reference chart for your model of carburetor is also included. Performer carburetors are available with a variety of options; select the model that best suits your needs.
( 1470 )
$517.95
—
$590.95
On Sale
Roush 2015-17 Mustang 3.7L V6 Level 1 Performance Pacs are one of the easiest and most economical ways to achieve a power boost! These kits have been dyno-tested to add more than 12 hp and 13 lbs.-ft. of torque to your rear wheels. The industry-leading cold air intakes are designed to maximize the space in your engine bay. They're injection-molded units equipped with a high-flow, multi-layer filter—and the lower restriction rate means you'll never have to upgrade your intake. Level 1 Performance Pacs include calibrations engineered for aggressive throttle mapping, a sportier feel, and driving enhancements across the power band. These calibrations can be quickly programmed into your factory ECU using standard J2534 reflash interfaces and the accompanying Roush Diagnostic Tool utility. * An optional 3-year/36,000-mile Limited Powertrain Warranty is available.
Not Yet Reviewed
$760.99
$684.89
Nick Williams Performance drive-by-wire throttle bodies are precision CNC-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX and LTX performance engines. These throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installed. There is no need to disassemble your factory throttle body. Order the model designed for your vehicle and engine application.
( 21 )
$690.00
—
$715.00
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$659.95
$509.95
—
$779.95
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$519.95
These Performer RPM FE intake manifolds from Edelbrock are designed for high-performance street Ford FE V8s with standard low/medium-rise or Edelbrock Performer RPM FE heads. Their dual-plane constant cross-sectional area design builds low and mid-range acceleration, while optimized runner paths make top-end horsepower. These manifolds have a provision for adding the PCV or breather flange at the rear, and no exhaust crossover passage.
( 37 )
$736.95
—
$865.95
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 440 )
$681.95
$509.95
—
$865.95
Your 6.2L LSA CTS-V is impressive. Lingenfelter 630hp CTS-V engine packages will make it very impressive! These upgrade packages enhance your supercharged engine with a substantial horsepower and torque improvement over the factory 556 hp and 551 ft./lb. of torque. And they do that while maintaining a safe level of boost and supercharger rpm. Packages include: * 2.55 in. diameter powdercoated 8-rib steel supercharger drive pulley * 8-rib serpentine belt * Lingenfelter LS9 solid supercharger isolator coupling * Lingenfelter air intake duct * Air filter * 160 degree thermostat
Not Yet Reviewed
$759.95
On Sale
For maximum power with exceptional drivability, transplant the power of fuel injection into your vehicle with Painless Performance fuel injection harnesses. All kits include straightforward instructions and TXL high-temperature, color-coded, and labeled wire for ease of installation. All fuel injection harnesses are 100 percent quality-tested on OmniScanners to ensure the viability of the circuits. Harnesses for both GM and Ford applications are available and they use genuine original equipment connectors for trouble-free installation and operation.
( 94 )
$564.99
—
$809.99
$508.49
—
$728.99
On Sale
Summit Bucks
Summit Racing™ Performance turbochargers have the latest in compressor aero technology with quick-spooling, yet free-flowing turbines. Starting with 66mm inducer sizes and working up to 79mm, the SUM-2600 Series turbos are reliable and a great value. The SUM-2700 Series are true race turbos starting at 76mm and go up from there. T4, T6, and V-band turbine housings are available. These are specially designed, balanced, and precision assembled in North America for class leading racers. They feature 2618 billet forged compressor wheels that offer superior flow and dependability at high boost.
( 7 )
$689.99
These Vortec manifolds with TBI from Chevrolet Performance are designed for maximum horsepower with throttle body fuel injection and EGR usage. These manifolds will fit all Vortec-designed cylinder heads.
( 17 )
$683.17
Dual plane Chevrolet Performance Parts' Carbureted LT1 intake manifolds make it possible to take advantage of the advancements found in Generation 2 Chevy engines. They allow you to install a carburetor on your LT1 engine without the hassle of running a computer or emission controls. They accept both Holley and Quadrajet carburetors, and feature longer runners that increase engine torque by up to 30 ft.-lbs. without sacrificing top-end power.
( 28 )
$507.67
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$514.95
—
$689.95
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$649.00
—
$799.00
Ford Performance Parts high-flow fuel injectors are specifically designed for performance applications. They are offered in a variety of flow rates, with a range of impedances, long or medium lengths, and USCAR or Jetronic/Minitimer-style electrical connectors (adapter kits are sold separately). The injectors work best with air meters with revised calibrations and have been specially trimmed for high-flow rates. Notes: * All injector flow rates are quoted at a delta pressure of 39.15 psi * To convert to a delta pressure of 43.5 psi, multiply flow rate by 1.054
( 44 )
$597.99
—
$610.99
First off, don't let the Jr. fool you--this Pro-Filer Sniper Jr. intake is just as good as its big brother! The Sniper Jr. intake manifold is optimized for engines 68 to 540 c.i.d. and larger with BBC cylinder heads such as Pro-Filer's Sniper and Sniper X with deck heights of 9.8 in. or 10.2 in. Yes, this is the intake those of you that race in a conventional head class have been looking for! They produce remarkable horsepower out-of-the box, with features such as cast injection bosses, 4500 Series carb flange, four corner water bosses, and exclusive as-cast ported plenum and runners, making this Sniper Jr. intake the best in BBC manifolds!
( 6 )
$749.99
What is your engine wearing? Dressing your Chevy engine with a genuine Chevrolet Performance intercooler water pump means getting the fit and function you know will produce the desired results. These durable fluid pump assemblies are quality-built to outfit your supercharged engine with effective cooling and efficient operation. For upgrade or replacement, maintain your engine's red carpet performance by choosing parts tailor-made to fit—a Chevrolet intercooler water pump.
( 1 )
$785.99
Chevrolet Performance replacement fuel injectors are available for hundreds of auto and truck models from Chevy, Pontiac, Saturn, Buick, GMC, Cadillac, Hummer, and Oldsmobile. These OE-style parts will help you to get maximum fuel efficiency and power from your engine. Properly operating fuel injectors are essential components for helping your vehicle run flawlessly. Order the gasoline or diesel injector designed for your application.
( 24 )
$592.99
Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds utilize a proven short runner tunnel-ram style that provides that next level of performance you have been looking for. They are both direct stock replacements for OEM equipment with all required emissions features. The Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds are manufactured from aluminum and feature a natural finish. Edelbrock's patended Air-Gap design delivers a cooler and denser air stream for maximum power output. They are designed to work with either stock, 52mm or 58mm Edelbrock throttle bodies, and will accept OEM fuel rails.
( 4 )
$822.95
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 16 )
$827.95
Chevrolet Performance EFI intake manifolds are ideal stock replacements for your worn or faulty original. These multi-port injection models are made from factory-style materials to OE specifications—for a proper fit and flawless performance. Order the manifold recommended for your vehicle application.
( 1 )
$678.99
Ford Performance has released the 2018-2023 Mustang GT intake manifold to be available as a replacement part for your 2018-2023 5.0L, or as an upgrade for your 2011-2017 5.0L Coyote engine. Custom calibration is required for the 2011-2017 models. When upgrading to this intake, you can expect improved horsepower and torque over the stock manifold. For the quality parts you need for your Ford, choose Ford Performance Parts.
( 3 )
$509.99
With any older standard cab truck, getting the stock gas tank out of the cab to free up some space and move some weight toward the rear of the truck is always a good idea. Classic Performance aluminum gas tanks fit between the frame rails, are fully baffled, and are compatible with EFI or carburetors. They are made from 0.125 in. 5051 aluminum with 0.187 in. thick brackets and are the thickest on the market. Once installed, the fuel filler can pass through the bed floor, or a custom side fill can be added (requires a small C-notch in the frame). Classic Performance aluminum gas tanks are vehicle specific, install without having to move crossmembers, and you'll end up with a tank that not only looks better, but also helps your truck perform better. Sending units are sold separately.
( 2 )
$598.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
