Availability
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 440 )
$681.95
$509.95
—
$643.95
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$514.95
—
$670.95
Performer RPM Dual-Quad intake manifolds are available in two versions, one for small port cast iron factory heads and one for factory large port with Edelbrock's Performer RPM W-Series heads. These manifolds deliver performance improvements in the 1,500 to 6,500 rpm range with Edelbrock Performer Series or Thunder Series AVS dual-quad carburetors, and they accept their dual-quad accessories including fuel lines, throttle linkage, and air cleaners. They include the oil fill tube and matching push-in breather.
( 3 )
$746.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$548.95
Edelbrock Performer Dual-Quad Air-Gap EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator--which are each sold separately.
( 1 )
$779.95
Mopar Performance cold air intake kits reduce intake air temperature and increase intake manifold pressure, which equals more power. They're quick to bolt on and they make substantial, yet economical power and torque gains.
( 16 )
$504.99
—
$648.99
What's tall, good-looking, and makes tons of power? Trick Flow's® R-Series intake manifold for Mopar 440! Trick Flow® engineers went to work when customers requested an ultra-performance intake manifold for large cubic inch, high-horsepower, big block Mopar engines. The key to the manifold's high-power production is the CAD-optimized, one-piece single plane runner design with a large open plenum—paying special attention to smooth airflow for equal air and fuel distribution. Nitrous users will be happy to find integral bosses that can be drilled and tapped for nozzles, while all engine builders will be glad that Trick Flow® left material around the port openings so the manifold can be port matched and/or fully ported. To keep weight as low as possible, the R-Series intake manifold is made from lightweight yet strong cast aluminum. When it comes to carburetion, you'll find that Trick Flow® machined on a Holley 4500 Dominator mounting flange for maximum performance potential. Designed to produce maximum power with Trick Flow's® PowerPort 270 cylinder heads on 440-based engines working in the 3,500-7,500 plus RPM range, the R-Series intake manifold also performs extremely well with other brand cylinder heads using 270cc and larger intake ports.
( 3 )
$524.99
For the best fit and function, choose Mopar Replacement intake manifolds to replace old, cracked, and worn originals in your Chrysler, Dodge, or Jeep. Manufactured from quality materials, these Mopar parts offer an OE fit for an easier installation—and provide the right look, along with great performance, too! Select the Mopar part application designed for fitment on your vehicle.
( 17 )
$578.99
—
$822.99
BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
( 1 )
$569.95
These Edelbrock CH-28 dual quad intake manifolds are designed for 413, 426, and 440 c.i.d. Chrysler V8s. Use them with the Performer-Plus cam for more low-end torque, or the Torker-Plus cam for more top-end power. They will not fit 1962-64 Max Wedge cylinder heads. Carb center to carb center is 6 7/16 in.
( 1 )
$530.95
On Sale
Holley single plane carbureted intake manifolds are designed to provide a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The carburetor mounting pads will accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These Holley intake manifolds are also engineered to accept most stock hardware and accessory brackets—but offer performance features like: an updated plenum divider area; a 1 in. shorter height than their Strip Dominator manifold; and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. Features include: * Single-plane with isolated plenum * Square-bore carburetor mounting flange * Isolated water crossover * Power band: 2,500 to 7,500 rpm * Height: Front 4.18 in., rear 5.28 in. * Port size: 1.92 in. height, 1.20 in. width
( 9 )
$573.95
$515.95
—
$549.95
For maximum performance in normally aspirated competition applications, Weiand Hi-Ram Tunnel Ram intake manifolds are the manifold of choice. They're designed primarily for drag racing, truck/tractor pulls, and performance marine applications where high rpm is required but bottom-end torque isn't. With their patented D-shaped port runners and large plenum chamber, the manifolds provide optimum thrust of the air/fuel mixture to the intake ports. They mount either single or dual square-mount carbs and, depending on the application, have power bands that run from 2,500 rpm to as high as 9,000 rpm. Separate tops and runners are available for some manifolds. Order the model recommended for your year/make, engine, and cylinder head application.
( 27 )
$699.95
On Sale
Holley EFI Gen III Hemi single plane intake manifolds provide maximum hood clearance combined with plenum and runner geometry that provides a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The isolated design of the air/fuel passages helps to increase charge air density and performance. Holley EFI Gen III Hemi single plane intake manifolds are great for turbocharger, centrifugal blower, or NOS power adders. Features: * Minimum carburetor flange height for maximum clearance to hood * 4150-type throttle/carb flange * Cast aluminum construction * Billet fuel rails * Billet aluminum oil fill cap * Mounting brackets for use with either Bosch EV1 or Gen III Hemi OEM fuel injectors * O-ring seals around ports * Natural or black finish available
( 2 )
$630.95
—
$649.95
$566.95
—
$583.95
Offenhauser 360 Degree Equa-Flow Dual-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with its unique split-plenum chamber and tuned intake runners. That combination delivers the fuel-air charge evenly to all cylinders for more power without flat spots. Edebrock Performer series and Carter AFB carburetors are recommended. Some applications cannot mount Holleys in any manner, or clear HEI.
( 1 )
$642.99
—
$719.99
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$830.85
$764.85
—
$781.85
Offenhauser Turbo Thrust intake manifolds are tall, 2-piece, Tunnel Ram style intakes that make big power. They're available for popular U.S. V8s, both big blocks and small blocks. You can select the desired performance level by choosing among the different top sections, which are available for single and dual quads, including the Holley 4500. There also are top sections for boat-racing applications, where more torque is needed at lower revs, such as for jet drives. Power increases range from 1,800 rpm to 6,800 rpm with one quad, and 8,500 rpm with dual quads. Order the model recommended for your vehicle and engine application.
Not Yet Reviewed
$673.99
Ford Performance has released the 2018-2023 Mustang GT intake manifold to be available as a replacement part for your 2018-2023 5.0L, or as an upgrade for your 2011-2017 5.0L Coyote engine. Custom calibration is required for the 2011-2017 models. When upgrading to this intake, you can expect improved horsepower and torque over the stock manifold. For the quality parts you need for your Ford, choose Ford Performance Parts.
( 3 )
$509.99
Dual plane Chevrolet Performance Parts' Carbureted LT1 intake manifolds make it possible to take advantage of the advancements found in Generation 2 Chevy engines. They allow you to install a carburetor on your LT1 engine without the hassle of running a computer or emission controls. They accept both Holley and Quadrajet carburetors, and feature longer runners that increase engine torque by up to 30 ft.-lbs. without sacrificing top-end power.
( 28 )
$507.67
Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds utilize a proven short runner tunnel-ram style that provides that next level of performance you have been looking for. They are both direct stock replacements for OEM equipment with all required emissions features. The Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds are manufactured from aluminum and feature a natural finish. Edelbrock's patended Air-Gap design delivers a cooler and denser air stream for maximum power output. They are designed to work with either stock, 52mm or 58mm Edelbrock throttle bodies, and will accept OEM fuel rails.
( 4 )
$822.95
On Sale
Edelbrock Performer RPM LS1 intake manifolds are manifold-only packages that allow you the opportunity to use a carburetor on these originally computer-controlled engines. Edelbrock LS1 intake manifolds are manufactured from aluminum and offer you the ability to maximize torque and increase the power curves of your engine. Are you going back to the traditional carburetor? Rely on Edelbrock Performer RPM intake manifolds.
( 12 )
$638.95
$511.16
These Chevrolet Performance introduces a new line of intake manifolds for those who want to run their GM V8 LS1-style engines. Whether it is a carburetor or throttle body, these carbureted LS1/LS6 intake manifolds are designed for high performance applications. The intakes feature an open plenum that has been extensively dyno-tested and has shown very even exhaust gas temperatures across all cylinders, which means it has very even air/fuel mixture distribution. The manifolds have the bosses for EFI fuel injectors but require machining if using an EFI throttle body installation.
Not Yet Reviewed
$753.98
Demon Carburetion Shadow Black Street Demon carburetors redefine the fuel/air mixer with an all-new black ceramic coating which acts as a protective barrier to heat and corrosion. They offer car enthusiasts a straightforward design to deliver stable idle, amazing throttle response, and smooth performance. With optimized calibration and a dual-mounting pattern, they are ready to run … right out of the box! The carburetors feature an integrated fuel bowl/main body design, with the gasket above fuel level, and no plugged passages--eliminating all potential leak paths. They include small 1 3/8 in. primary throttle bores, combined with proven triple-stack boosters, to facilitate crisp throttle response and drivability. Other specs and benefits: * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * 625 cfm airflow * Dual-mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 8 )
$649.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
