Availability
ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. These bolts are both corrosion and heat-resistant and come highly polished. Bolts are available in both hex head and 12-point types, and washers are included.
( 260 )
$50.99
—
$79.99
On Sale
These special Grade 8 intake manifold bolts from Mr. Gasket feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They're ideal for use where space is minimal, typical on larger runnered race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
( 1 )
$55.65
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$58.95
—
$61.95
These show quality intake manifold bolts from Mr. Gasket are individually polished to a high luster, then chrome plated for lasting beauty. They're ideal for street rods and street machines, or any vehicle requiring show quality chrome.
( 4 )
$87.05
ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. These bolts are available with either hex or 12-point heads, and washers are included.
( 397 )
$50.99
—
$94.99
These Trick Flow® stainless steel intake manifold bolt kits are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® stainless steel intake manifold bolt kits are both corrosion and heat-resistant and come highly polished.
( 1 )
$62.99
—
$72.99
These Trick Flow® steel intake manifold bolt kits have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® steel intake manifold bolt kits are heat-resistant and come in a chrome finish.
( 3 )
$60.99
Eliminate fastener problems with Stage 8's complete line of locking bolt kits. They provide a simple, yet effective method to insure that your fasteners do not loosen unexpectedly. Each fastener uses a mechanical clip to lock it in place, and preventing it from backing out. The clip acts like leaving a small wrench on the bolt head, as the clip prevents the fastener from turning. Easier to use than safety wire, and cleaner than chemical thread lockers, it remains locked in place until manually disassembled. They're great for racers, and common problem areas such as header and oil pan bolts, and remain locked in place until manually disassembled.
( 2 )
$59.23
Chevrolet Performance offers these intake manifold bolts for securing your manifold with confidence. They're rated at 170,000 psi and will give consistent torque load.
Not Yet Reviewed
$74.32
Stage 8 locking intake manifold bolts are designed to stay put once they're tightened down. They are reusable, can be visually inspected, and install easily with no special tools.
( 3 )
$59.23
—
$66.27
NotcHead intake manifold bolt kits offer their unique, seven-notched design forged from high-grade stainless steel and CNC finished for strength and a beautiful appearance. Each bolt comes with a neoprene bonded stainless steel washer. Used along with NotcHead custom engineered sockets, you can eliminate the occurrence of "rounded off" bolt heads—a common and frustrating problem with traditional button heads. Dress up your intake manifold with NotcHead bolt kits.
Not Yet Reviewed
$79.37
—
$105.17
MSD LT1 Airforce intake fastener kits serve as high-quality bolt replacements, specifically designed for the MSD Airforce intake manifold. The Allen head style bolts are made from stainless steel with a natural finish and come with washers to facilitate fuel injection throttle body attachment.
( 1 )
$92.19
FAST intake manifold hardware kits come complete for specific FAST intake manifolds. The kits are made from stainless steel for longevity and have an Allen head design for optimal bolt head clearance for installation.
( 2 )
$61.95
—
$94.95
Holley intake manifold studs are made of high-quality steel construction for long-lasting durability and performance. They are designed to be used with Holly Hi-Ram style intake systems to give them peak performance. If you have a new Hi-Ram system you're throwing in your ride, make sure you don't forget to grab a set of these Holley intake manifold studs.
( 1 )
$88.39
RESTOPARTS® Supplied intake manifold bolt kits include all of the necessary hardware to properly install your manifold. Precision-grade engineering and material provides a perfect fit and solid performance for every application. Order the kit recommended for your year, make, and model.
Not Yet Reviewed
$54.99
Bolt down your manifold with a set of these Gardner-Westcott intake manifold bolt kits. They are available in chrome plated or polished finishes, so they're sure to add a unique touch to your engine. Whether you own a Ford, Chevy, or Mopar, these Gardner-Westcott intake manifold bolt kits will have you covered.
( 34 )
$51.99
—
$65.99
Significantly increase the flow in your Dodge fuel system with these BD Diesel upgrade kits. They are designed to replace the banjo bolts on the OEM lift pump, fuel filter, and at the inlet of the VP44 injection pump. These high-flow banjo bolt upgrade kits include a port for monitoring fuel pressure with a gauge kit.
( 2 )
$77.95
Jaz Products 5-bolt tip over flappers are designed to be mounted under 12-bolt bail handle caps. They seal the fuel cell under the cap in the event of a rollover, greatly reducing the chance of fuel spills from the cap. These flappers come complete with instructions and hardware.
Not Yet Reviewed
$57.99
Tanks Inc. offers a complete line of gas tank accessories, including fuel filler neck and cap kits. These kits are made of quality metals--steel, stainless steel, and aluminum. They are available with threaded, push-through, or pop-up style caps.
( 67 )
$67.99
Stage 8 locking turbocharger fasteners are easy to use and are real assurance against horsepower loss or gasket failure created by loose nuts and bolts. Their unique, patented, and trademarked functional design is comprised of just three pieces: a bolt, a locking retainer, and a spring clip--or, depending on the application: a nut, a locking retainer, and a spring clip. The fasteners are available as either metric hex head 6-point or metric nut.
( 5 )
$51.64
—
$87.61
On Sale
Holley throttle body angle adapters resolve problems. The considerable angle of the LT intakes can cause issues routing inlet plumbing and clearance to aftermarket accessory brackets. These adapters level the throttle body for swap applications without changing the flow the GM design intended. Other four-bolt intakes with routing issues can also benefit from this adapter. Features and benefits of Holley throttle body angle adapters: * Billet aluminum construction * Maintains proper throttle body blade orientation * Eliminates drivability issues associated with inverting the throttle body * Allows clearance to aftermarket accessory brackets or other clearance and routing issues * No harness rerouting or extending required * Works with both truck and car LT intake bolt patterns * Works with all 4-bolt LS intake bolt patterns * Works with up to 95mm intakes and throttle body openings * Works with common LS and LT 104 x 70mm bolt pattern throttle bodies * Adapts common LS 104 x 70mm bolt pattern throttle bodies to LT 5.3L truck intakes * Works with Holley 92/95mm Hi-Ram and Mid-Ram intakes * Allows use of cable-operated and other throttle bodies on Gen V 5.3L intakes
( 5 )
$90.39
$81.35
Jaz Products offers these fuel cell cap assemblies in a choice of styles to suit your needs. These caps are made for drag race and Circle Track fuel cell applications. Jaz Products fuel cell cap assemblies are made from quality materials and come complete with all hardware and gaskets .
( 27 )
$99.99
The RotopaX LOX pack mounts provide extra security for your RotopaX containers (sold separately). Simply mount this utility jug component to any flat surface, place your RotopaX container on mount, align with container "dimples," and turn until tight. The unique DLX handle design gives more turning power to keep containers tight against its mounting surface. Insert the lock cylinder for extra security to deter theft while out on your adventure.
( 1 )
$79.99
These Volant Vortice throttle body spacers are designed to squeeze a little more performance out of your car or truck. These throttle body spacers are made of an extremely durable, glass-filled nylon composite that will not corrode or deteriorate due to the elements. Volant designed these throttle body spacers to work with either your factory air box or Volant's own cold air intake to provide quicker throttle response and, in most applications, improved fuel economy. Volant provides all of the mounting hardware and gaskets required for your application to make installing your Vortice throttle body spacers easy.
( 44 )
$71.90
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
