Availability
Showing In Stock Items. Show All 157 Items.
Green Filter factory replacement air filters deliver high performance—forever! Manufactured from recycled materials, the filters are stronger than stock, offer an OE fit, and will maintain maximum airflow for increased horsepower and fuel mileage. Their washable and reusable deep double-layered cotton pleats are encased in steel wire mesh and set in hand-molded flexible rubber bases for an airtight seal that also absorbs vibration. So, stop emptying your wallet and filling the landfills. Instead, increase your vehicle's performance with a Green high performance factory replacement air filter. They're available in a wide range of styles and sizes for both universal and vehicle-specific applications.
( 84 )
$50.16
—
$99.98
On Sale
The Duramax factory fuel filter delete kit from FASS Fuel Systems is for use after the installation of an air/fuel separation system. Once installed, the factory fuel filter is no longer needed and can be easily removed by using this canister delete. Because your Duramax fuel filter is located after the fuel filtration system, you'll still need to replace the factory filter every 5,000-8,000 miles. This filter delete kit will replace your now-useless fuel filter with a spin-on canister that allows fuel to flow freely into the engine, saving you even more money. The kit is a perfect addition to your FASS Titanium or AirDog diesel fuel pump and comes with all required hardware for a professional installation. (Note: This product is ONLY for use on trucks that already have another form of filtration, such as a FASS or Airdog.)
( 6 )
$77.90
$70.11
On Sale
Once you've installed an aftermarket Fuel Filtration System such as the FASS Signature Series, the use of the factory fuel filter housing is no longer required and can be removed. This Cummins factory fuel filter delete kit will replace your factory fuel filter housing with the delete block, cleaning up the engine compartment and providing an additional return port for dual CP3s. The FASS filter housing comes with new banjo bolt sealing washers and a -6 ORB plug for single CP3 applications. The "water in fuel" sensor threads into a port on the delete block, preventing false "water in fuel" lights. Details: * Eliminates your factory fuel filter housing * Prevents false "water in fuel" lights * WIF sensor port * Additional return port for dual CP3s
( 1 )
$84.55
$76.10
BBK oxygen sensor extension harness sets are direct plug-in designs to prevent the cutting and lengthening of your oxygen sensor wires. They are ideal for full-length headers and other specific applications.
( 45 )
$69.99
On Sale
Attach your throttle cable to your LS engine with one of these MSD Atomic AirForce intake manifold throttle cable brackets. They're manufactured from quality materials and are designed to bolt directly to the MSD Atomic AirForce intake manifold. The brackets include stainless steel mounting hardware to complete the installation.
( 3 )
$79.09
Trick Flow® EFI heat spacer kits help you fit your spacer between the upper and lower intakes to create a heat flow barrier. That keeps the air in the upper intake cooler and denser. Plus, these CNC-machined phenolic spacers provide clearance for taller valve covers. They're available in 3/8 in. and 1 in. thick versions and include gaskets and longer mounting bolts.
( 88 )
$64.99
—
$81.99
Lokar Hi-Tech throttle cables are available in stainless steel braided, black stainless steel braided, or black polyethylene housings. They're designed with a specially extruded liner for the extended life of the cable—not to be confused with ordinary braided brake hose. These cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying; and feature a "U-Cut-to-Fit" outer housing and stainless inner wire. The clevises are designed without cotter pins or set screws and adapt to factory and aftermarket pedals for an easy installation. Each cable comes with installation instructions. Order the universal-fit or application-specific model recommended for your vehicle and engine family.
( 661 )
$71.90
—
$114.95
Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 71 )
$74.99
—
$99.99
On Sale
K&N washable lifetime performance air filters are designed to increase horsepower and acceleration while providing excellent filtration. K&N makes over 1,400 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable--and are custom-designed to fit into your existing factory air box. Their drop-in design means that adding performance is simple. With most vehicles, you simply remove the disposable air filter and replace it with one of these K&N air filters. Find the model designed for your specific vehicle application.
( 1159 )
$125.99
$50.39
—
$100.79
Summit Racing™ fuel tanks are designed to meet or exceed the quality of factory fuel tanks. Whether you have a track car, classic car, or car you're restoring, Summit Racing™ has the high-quality fuel tanks you're looking for.
( 229 )
$99.99
Seal up your engine while looking good with one of these ICT Billet LT lifter valley covers. They are designed to fit Gen 5 LT engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 2 )
$99.99
On Sale
TH-700-R4 transmissions are controlled by an adjustable throttle valve (TV) cable that attaches to the carburetor or injector linkage with a special bracket. The cable regulates internal line pressure, shift points, and downshifts, so proper installation and adjustment is critical. These JET TV cable brackets fit most popular carburetors and TBI units for TH-700-R4 Conversions. These brackets are designed to work with GM factory cables.
( 22 )
$59.96
$53.96
These Trick Flow® LT1 air inlet elbows are designed to replace the ugly stock rubber air inlet elbow. They not only add a little bit of dress-up under the hood, but they also eliminate the factory resonator tube and include all provisions for using the factory sensors. These elbows are designed for use with SLP-type airfoils and are sized to work with stock air inlet systems. They will work with most brands of cold air kits, too.
( 45 )
$82.99
—
$103.99
Jaz Products maintains its own factory, equipment, and molds, producing the highest quality fuel cells designed for street/strip usage. Jaz Products street rod fuel cells have been rotationally molded in seamless, cross-linked polyethylene to provide strength, durability, and quality performance. Jaz Products street rod fuel cells are available with or without aviation safety foam.
( 11 )
$93.99
On Sale
Put the finishing touches on your truck with high-quality Fleece Performance turbo drain tube kits. The tubes are braided stainless steel for durability on the exterior, and reinforced with rubber tubing for flow and maximum flexibility. The kits contain everything you need to connect an S300/S400 turbo drain back to the factory drain location on the Cummins block when using a fixed vane geometry turbo. Kit contains: * Drain tube (20 in. end-to-end) * Cummins turbo drain tube adapter * Turbo drain flange adapter * Turbo drain gasket * 7/8 in.-14 to -10 AN fitting * Two 3/8in.-16 flange head bolts * Two 10mm x 1.5 flange head bolts
( 3 )
$99.95
$84.96
On Sale
The OEM plastic fuel filter cap on your L5P Duramax is susceptible to rounding off when replacing the water separator and cracking during extreme cold weather conditions. Upgrade your OEM plastic fuel filter housing or FASS Drop-In Series with a billet fuel filter end cap! These 6061 billet aluminum caps are engineered and manufactured with the quality you'd expect from FASS. They utilize the same 36mm socket for removal and are equipped with a billet aluminum drain valve that allows for tool-free draining! Details at a glance: * Replaces the cheap OEM plastic fuel filter cap with a high-quality 6061 billet aluminum cap * Billet drain valve allows for easy draining * Works with the factory plastic fuel filter housing and the FASS L5P Drop-In Series systems * 1/8 female NPT port on the billet drain valve allows for a barb fitting to be installed if desired
( 1 )
$110.20
$99.18
BluePrint Engines offers throttle bodies for a wide range of applications, including many Chevrolet, Cadillac, GMC, Hummer, Saab, Dodge, Jeep, and Ram cars and trucks from 2009 and up. The LS compatible throttle bodies feature OEM quality, an 87mm throttle blade, and provide an excellent performance alternative to the pricey factory version. They're a great Gen IV swap candidate for engines using the 2009+ pinout and wiring. Tested by BluePrint on OEM vehicles, and used on LS3 and supercharged LS applications, let your LS breathe with one of these OE grade throttle bodies. Additional details: * 87mm throttle * Multi-port fuel injection * Drive-by-wire * 6-pin electrical connector - Gold Blade * Replaces: 12601387, 12629992, 2173151 * Used in factory GM Supercharged LS configurations * Can also be used to replace snout style TB 12605109, 19420707 as a space saver with tuning * Can be used as an OEM replacement, or as a swap throttle; however a throttle position reset of the OEM ECU is required for proper idle and drivability
Not Yet Reviewed
$104.95
Pioneer throttle cables are designed to replace your damaged or worn-out OEM throttle cable. They're made from quality materials and have the factory ends installed for a direct fit. These cables are available in a variety of configurations to fit your specific engine and transmission applications.
( 68 )
$50.99
—
$108.99
Faulty accelerator cables can lead to acceleration problems and be a safety hazard. If your cable is frayed or corroded, replace it with an OER accelerator cable! These high-quality replacement cables are reproductions of the factory cables, so you can be assured of proper fit and throttle operation.
( 38 )
$59.99
When upgrading your LS-powered vehicle, don't forget to replace the factory steam tubes. Our Summit Racing™ Pro LS steam line plumbing kits eradicate trapped air and steam pockets from your engine to prevent hot spotting and overheating as well as provide more flexibility when using aftermarket intakes. Kits vent all 4-corners (except SUM-220952 and SUM-220952B kits) and contain black anodized billet aluminum fittings, steam port adapter, O-rings, stainless steel bolts, -3AN or -4AN hose and hose ends, (stainless steel hard lines and 5-port distribution block on SUM-220959 kit only) to make installation easy and more attractive than OEM lines, offering a cleaner look and better waterflow.
( 18 )
$74.99
On Sale
Upgrade your fuel system with these Fleece Performance fuel filter delete blocks. If you have an aftermarket fuel filtration system, such as an Air Dog or a FASS, your factory fuel filter is no longer necessary—is only becomes an extra restriction and an eyesore. These delete blocks will remove that restriction and help clean up under the hood of your truck. They mount perfectly to allow the factory fuel return lines to be used without any relocating or bending. The blocks also feature a port for the factory WIF (water in fuel) sensor and a 9/16-18 O-ring port for a dual CP3 return line.
( 2 )
$79.25
$67.36
Steeda ProFlow blow-off valve adapters give your engine the sound to match its performance. These adapters will convert your factory re-circulation valve into a blow-off valve, giving it the iconic turbo sound! CNC-machined in-house from aerospace-grade 6061 billet aluminum, ProFlow BOV adapters are easy bolt-on parts that require no modification or tuning. On high-boost applications, they also help to prevent turbo surge, by allowing the pressure to vent to the atmosphere. The adapters are available for fitment on a variety of Ford Mustang and Fusion vehicles from 2015 and up. Benefits include: * Releases excess boost pressure to the atmosphere * Converts the factory re-circulation valve into a blow-off valve * CNC-machined 6061 billet aluminum * Bolt-on installation * No modification or tuning required
( 6 )
$99.95
RESTOPARTS® Supplied fuel pump eccentrics are designed to fit engines equipped with a mechanical fuel pump. They're made from case-hardened steel and are an exact reproduction of the factory original. These units are available for dozens of Pontiac V8 applications from the 1950s, '60s, and '70s.
( 2 )
$69.99
The GM LS Series engines are being built for a lot of different performance and racing applications. You can see good ol' hot rodder ingenuity taking place as racers are running carburetors and even using distributors on these engines! These MSD LSx trigger converters plug into the factory crank sensor of an LS engine. They then convert the factory trigger signal into a 12 V square wave signal to trigger an MSD ignition control such as a 6 or 7 Series ignition control. If you are incorporating a front mount distributor into your LS engine, this means that you won't need to run an external crank trigger.
( 3 )
$52.69
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
