Availability
These time delay switches (DIP Switch) allow you to activate a second or third stage of nitrous, or any other electrical device, as a function of time. The delays are easily set from 1/10th of a second to almost two minutes, in 1/10th second increments, by setting the small switches on top of the timer. They come available with dial or dip switch settings.
Not Yet Reviewed
$324.95
On Sale
Nitrous Outlet X-Series nitrous oxide systems are the perfect solution for racers on a budget. They're made of the same high-quality parts as other Nitrous Outlet systems, and are available in universal and application-specific kits. Choose your nitrous delivery style, wet or dry, desired horsepower increase, jet sizes, and other options. X-Series nitrous oxide systems include everything you'll need for a clean installation and enhanced performance at the track!
( 26 )
$563.99
$479.39
Nitrous Express Gen-X packs are the ultimate accessories for your EFI nitrous system. These kits contain the best components to make your nitrous system dependable, worry-free, and safe. NX Gen-X EFI packs include: * Fully automatic bottle heater with pressure transducer * Fuel pressure safety switch * Liquid-filled N2O pressure gauge * NHRA-approved pressure release fitting * NHRA-approved blow down tube * All electrical connectors and wire needed to complete the installation
Not Yet Reviewed
$532.27
On Sale
AEM Electronics water/methanol injection kits allow you to increase boost pressure and advance timing without having to run higher-octane fuel resulting in significant horsepower gains.
( 35 )
$565.95
—
$599.95
$508.95
—
$538.95
On Sale
Aeromotive has a regulator that's ideal for switching to a carbureted fuel system. Aeromotive EFI to carb conversion fuel pressure regulators work with OE return-style EFI systems. They provide an adjustable bypass pressure of 8-16 psi and have adjustable regulated pressure to the carb from 5-9 psi. These regulators have a 3/8 in. return, and inlet and outlet ports for regulated flow. Aeromotive EFI to carb conversion fuel pressure regulators combine new school and old school.
( 17 )
$390.95
$351.86
NOS Mini 2-stage progressive nitrous controllers feature two independent stages of nitrous control, each with its own throttle position activation switch and progressive control ramps. They eliminate the need for a window switch, and enable you to turn the nitrous on and off at set points. The controllers also feature two programmable outputs so you can control timing retard or other devices. The included hand-held programmer makes programming quick and easy.
( 5 )
$289.95
In gasoline engines, as with any intercooler, Stage-1 Boost Coolers suppress detonation, so more power-producing boost and timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. These systems contain everything needed to start making big hp! They're designed for use in gasoline (6-15 psig boost) supercharged/turbocharged vehicles. Systems include: * 300 psi high-volume pump * Adjustable boost pressure switch * 3 qt. reservoir * Two nozzles sized to your FWHP and boost levels * Bosch relay and all the electrical parts * Fittings, tubing, etc. for installation
( 16 )
$374.99
—
$479.17
Summit Racing™ EFI fuel cells will help make switching to fuel injection painless. These cells are made from 5052 lightweight aircraft aluminum and TIG-welded for strength and durability. They're available in a variety of sizes and fuel capacities. Models are available with or without sending units and fuel pumps. These cells are designed to work with Summit Racing™ or Tanks Inc. retrofit in-tank fuel pumps.
( 2 )
$285.99
—
$360.99
On Sale
Holley Sniper HyperSpark plug-and-play main wiring harnesses were designed to make upgrading your ignition on a Sniper EFI-equipped engine easy. When this harness is installed concurrently with a new Sniper EFI system, the combination creates the easiest to install EFI conversion on the market—only four flying lead connections required! Key features: * Harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power * Pre-terminated connectors and a built in 40A relay provides power to all of the components within the system * With the included Sniper EFI main harness, you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay * Just route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in
( 2 )
$320.95
$288.85
The G-Force III is the latest iteration of Go Fast Bits' feature-packed electronic boost controller—now with the ability to monitor and display your engine's air/fuel ratio in either Lambda or AFR. By connecting the analog output of most wideband oxygen controllers (i.e. Innovate LC-2, AEM UEGO etc.; sold separately) to the G-Force III's auxiliary input, you can toggle between boost pressure and air/fuel ratio display. This saves you from having to install a separate AFR gauge in your car, and it can also save your engine! A lean mixture at high boost can destroy an engine in seconds, and a stand-alone AFR gauge is next to useless when accelerating hard, as your concentration is likely to be on the road in front of you. The G-Force III safeguards your engine against a lean mixture by lowering boost to the minimum setting, and visibly warning you by flashing the display lighting. Whether your car is a daily driver or an all-out track weapon, the G-Force III has the features to tailor boost to suit your needs. Set up to six boost presets and select on the fly; use the scramble feature for overtaking, launching, towing, or protecting the engine—and you can even customize the lighting color to suit your interior! No other EBC on the market offers the features, control, ease of use, and value for money like the G-Force III! Additional G-Force III electronic boost controller details: * For boost pressures up to 50 psi (3.45 bar, 345 KPA) * Adjust peak boost, rise rate, and closed loop correction. * Display boost pressure in PSI, BAR, or KPA * 6 Boost presets, individually programmable * Unique "scramble" feature with remote switching * Peak boost recall * Air/fuel ratio display in AFR or Lambda (when connected to a wideband oxygen controller) * Separately adjustable overboost and lean mixture warning/boost cut * Touch buttons with user selectable illumination colors * Auxiliary input to switch boost presets or activate scramble * 1/2 DIN size casing, fits standard stereo slot * Supplied with MAC 3-port solenoid
( 1 )
$396.00
Stromberg BIG97 carburetors feature 55 percent increased airflow to put out a whopping 250 cfm! They have the same standard 97 outside shape, but use enlarged 1.175 in. venturi with a super-efficient 20 degree entry angle. The accelerator pump discharge jets are smaller, and flared exit cones build power by slowing down the mixture to reduce turbulence into the manifold plenum. The result is 250 cfm. Stromberg BIG97 Tri-Power carburetors feature: * Signature 97 outside shape and styling * Cast iron base * Reinforced airhorn * Early plenum effect: allows all cylinders to draw from both barrels, giving you dual-plane drivability with a single-plane style top-end horsepower * New power valve circuits improve fuel conditioning: feeds top-end enrichment directly into the emulsion tubes * Ported distributor vacuum: switch in the brass plug (included) and connect your distributor to improve combustion efficiency in cruising mode; you'll run smoother and cooler, with more torque and better fuel mileage * Big S-jet twin-ball inlet valve: accepts 5/16 in. hard line and standard Stromberg fuel fittings * Four finishes available: original equipment style, chrome, chrome/black, or barn find (patina)
( 2 )
$525.00
On Sale
Holley Dominator billet fuel pumps feature a patent-pending twin-pump design. It allows you to use one pump for cruising and both pumps when you activate the nitrous switch or start building boost. By staging the second pump, you eliminate the unnecessary recirculation and heating of extra fuel, which can lead to poor performance and hot fuel issues. They can also be wired for full-time duty to get the maximum performance and are proven with an 18 V compatibility at pressures of up to 80 psi. At only 5.1 lbs., they weigh half a pound less than other 1,000 hp pumps, and yet they have twice the features. Features include: * Billet aluminum construction with anodized finish * -10 AN O-ring inlet/outlet for high flow and superior sealing * Excellent for use with carburetor or EFI applications * Compact for easy installation on frame rails or other tight spaces * Proven durability beyond 3,000 hours in gasoline or diesel fuels * Fully sealed, can be submersed if necessary
( 13 )
$549.95
—
$573.95
$493.95
—
$515.95
System 1 fuel filters have a lightweight, aluminum housing and a reusable stainless steel screen element that is unaffected by gasoline, alcohol, water, or most fuel additives. System 1 inline filters have a removable end for easy filter servicing and quality O-ring seals to prevent leaks. Spin-on filters feature a removable cap for inspection without removing the filter housing, and a petcock drain so that sediment and moisture can be quickly drained. They're available in various sizes and attachment styles, as well as numerous micron particle ratings. Make the switch to System 1 fuel filters for rebuildable, high performance fuel filtering; just order the model best suited for your vehicle application.
( 2 )
$304.00
Rhodes Race Cars fuel pump modules will convert your fuel setup to fuel injection or switch to an internal pump—and they do it with style. These pump modules from RRC are easy to install; simply unbolt your cap, install the module, hook up your power and ground wire, plumb your fuel system, and you're ready to go. There's no need for any modifications to your fuel cell. Rhodes Race Cars fuel pump modules are available in different LPH with attractive black, red, or blue caps—and will include all necessary hardware and full instructions. Choose either single or dual-style module with or without pump.
( 7 )
$274.95
—
$499.95
JMS Chip PowerMAX FuelMAX V2 are devices that truly deliver! These fuel pump voltage boosters provide clean continuous voltage and the highest amperage available to provide maximum power and fuel for your vehicle. Up to an 80 percent increase in fuel delivery is possible to feed your high performance engine! The maximum output voltage range is user selectable and is controlled by a knob in the faceplate, or via the optional in-cabin over-ride control knob that adjusts voltage on the fly. These JMS voltage boosters are pre-engineered for use on most Dodge, Ford, GM, and import vehicles—as well as most any others utilizing an electronic fuel pump. PowerMAX FuelMAX V2 units feature proprietary enclosures and industrial heat-sink, with 10-gauge heavy-duty wiring and either 40 or 80 amp fuses—along with a host of innovative features to further improve your experience. For users that want the ultimate in easy installation, the plug-and-play option connects directly to the FPDM (fuel pump driver module) and activates via monitoring the pedal position sensor (PPS), eliminating the need to run wires through the firewall. Also available is a universal device that is easy to wire in--just cut and splice a single wire. Choose from single or dual inputs/outputs, cut-and-splice or plug-and-play versions, and 3-ways to trigger boosted output. Kits include: * PowerMAX device * Heavy-duty OEM-grade wiring harness * User adjustable Hobbs pressure switch * 1/8 in. NPT adaptor fitting * Wiring terminals * Wire splices and heat shrink * Solder * Vacuum line and tees * Mounting hardware * 40 amp fuses
( 4 )
$409.75
On Sale
Aeromotive VaporWorx ReturnX return-type PWM controllers have everything needed to provide a standalone fuel pump speed control system. Available for single or dual pump, naturally aspirated or supercharged applications, no switches, relays, or Hobb's switches are needed when using these ReturnX systems. Controllers have primary and secondary output with the primary providing sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. This leader/follower arrangement delivers a smooth ramp-up in pump speed until both pumps are at full output. For carbureted and EFI applications, simply attach the supplied standalone MAP sensor hose to a manifold vacuum source (naturally aspirated) or past the supercharger/turbocharger and make at-idle controller adjustments--the VaporWorx controller will do the rest. Select the single or dual naturally aspirated or supercharged version needed for your setup. Key features: * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent * Standalone MAP-based fuel pump speed control * Carburetor and EFI capability Benefits: * Everything needed electrically to drive the fuel pump(s) * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 40 to 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating range -- Can be used with voltage boosters -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition
( 1 )
$502.90
$452.61
On Sale
Pop your bottle for power—from your driver's seat—with Nitrous Outlet remote nitrous bottle openers. These openers are switch activated, feature thumb-twist screws to easily remove the opener if needed, and include all wiring and hardware. They were designed to work with Nitrous Outlet bottles, but are compatible with most other brand bottle valves, as well. Getting out of the driver's seat to open the bottle can be a hassle. Instead, open and close your nitrous bottle with a simple flick of your Nitrous Outlet remote openers.
( 2 )
$304.99
—
$461.99
$259.24
—
$392.69
On Sale
Earl's Performance Dominator in-line billet fuel pumps are for those of you who are in need of a fuel pump that can support serious horsepower. Have a nitrous system, turbo or supercharger? No problem! These fuel pumps feature a twin-pump design that allows you to use one pump for cruising and both pumps when you activate your nitrous switch or start building boost. The second pump allows you to eliminate the unnecessary recirculating and heating of fuel that can lead to poor performance and hot fuel issues. Earl's Performance Dominator in-line billet fuel pumps also have an added benefit for hard core enthusiasts that run events like the Hot Rod Power Tour or the Baja 1000; that extra pump brings you peace of mind that you'll always finish what you've started. Features include: * Billet aluminum construction for durability and good looks * -10 AN O-ring inlet/outlet for high flow and superior sealing * Suitable for use with carbureted or EFI applications * May be fully submerged in-tank for custom applications, space savings, and reduced plumbing * Compatible with 12 V to 18.5 V systems at pressures up to 80 psi for street or race use * For hardcore race use, both pumps can be wired for full-time duty * Only 7.66 in. long x 5 in. wide x 2.5 in. tall for easy installation on frame rails or other tight areas * Patent pending dual-pump technology * Proven durability beyond 3,000 hours * Weighs only 5.1 lbs.--half a pound less than competitive 1000+ hp pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.
( 1 )
$626.95
—
$699.95
$344.95
—
$384.95
When you decide to put a bottle under your hood, you want performance that makes you go fast; you expect durability for consistent, safe performance and, if at all possible, a good value. Proton Plus Series nitrous systems from Nitrous Express combine your wants and needs in a compact and easy-to-mount module. Constantly researching and developing to provide you with safe, reliable nitrous systems, Nitrous Express Proton Plus Series systems will exceed your expectations. These nitrous systems contain high-quality solenoids that are capable of producing 150 hp to the wheels, and their black anodized aluminum housing not only looks great, but it also pulls heat away from the solenoids for extreme durability. Proton Plus Series nitrous systems include jetting for 35, 50, 75, 100, 125, and 150 hp. They are available without a bottle or in three bottle sizes, including a lightweight 10 lb. composite bottle with an aluminum high-flow Lightning 45 bottle valve and stainless bottle brackets. Live and dream nitrous oxide with Nitrous Express--the people who are passionate about nitrous oxide. Additional features include: * Single Shark nozzle * Nozzle adapter * Stainless braided nozzle lines * Extra-long braided stainless feed line * Stainless fuel line * Master arming switch * Wide-open throttle switch * 40 amp relay * Relay harness * Every nut, bolt, and electrical connector needed to complete the installation
( 26 )
$527.86
—
$566.45
When you decide to put a bottle under your hood, you want performance that makes you go fast; you expect durability for consistent, safe performance and, if at all possible, a good value. Proton Series nitrous systems from Nitrous Express combine your wants and needs in a compact and easy-to-mount module. Constantly researching and developing to provide you with safe, reliable nitrous systems, Nitrous Express Proton Series systems will exceed your expectations. These nitrous systems contain high-quality solenoids that are capable of producing 150 hp to the wheels, and their black anodized aluminum housing not only looks great, but it also pulls heat away from the solenoids for extreme durability. Proton Series nitrous systems include jetting for 35, 50, and 75 hp. They are available without a bottle or in three bottle sizes, including a lightweight 10 lb. composite bottle with a chrome high-flow bottle valve and stainless bottle brackets. Live and dream nitrous oxide with Nitrous Express--the people who are passionate about nitrous oxide. Additional features include: * Single Piranha nozzle * Stainless braided nozzle lines * Extra-long braided stainless feed line * Master arming switch * Push button
( 4 )
$462.68
—
$540.30
On Sale
Nitrous Outlet ProMax Dual-Channel Progressive Controllers incorporate the system activation and safety functions of the WinMax—but adds numerous tuning and traction features that help you get the most out of your nitrous system. With the ProMax you can set rpm, time-based, or boost referencing progressive ramps for multiple stages while integrating wideband inputs. Additional features and benefits include: * Inputs for vehicle speed, trans-brake, MAP sensor, two wideband oxygen sensors, two nitrous pressure sensors, and one fuel pressure sensor * Two built-in 70 amp solenoid drivers can control two stages independently, or can be configured for closed-loop fuel control based on wideband oxygen input—with nitrous on one output and fuel on the second output * Progressive stage controls allow: adjustable frequency output of 10-30 Hz (by 1 Hz) for driving solenoids * Ability to be configured to vary solenoid duty cycle as a function of time, throttle percent (TPS), engine rpm, vehicle speed, manifold pressure (MAP) * Ability to set response of stage based on secondary arm switch input (arm/disarm) * Resume and restart feature option for controller—to resume an interrupted time-based ramp or start over based on TPS going out of range * Built-in rpm window switch with gear lockout feature * TPS or WOT switch activation * Data logging capable * Updateable Firmware * CAN Bus output * Two ignition retard outputs * Simple USB connection to PC/laptop * Optional 4.3 in. full touch screen display allows viewing of real-time data * Saved data logs can only be viewed on PC/laptop * Can save up to five different tuneups * Controller can be programmed via PC/laptop or optional display
Not Yet Reviewed
$600.99
$510.84
Nitrous Express universal dry EFI nitrous systems are designed to provide their nitrous oxide through a single dry nozzle. They do not add fuel and are intended for use with an engine management system that can add nitrous enrichment fuel through the engine's injectors. These systems include 35, 50, 75, 100, and 125 hp nitrous jets, as well as a 1/8 in.-NPT dry nozzle, a single 0.093 in. Lightning solenoid, a 10 lbs. bottle with the billet Lightning 45 bottle valve, a wide-open throttle switch, stainless bottle brackets, extra-long stainless braided N2O line, a relay with a harness, and all other necessary hardware to complete the installation.
( 1 )
$439.91
On Sale
Aeromotive VaporWorx Ally PWM fuel pump controller kits allow a second pump to be added to an OEM fuel system control module without causing overloading of the stock FSCM. They are compatible for use with positive trigger OEM fuel system control modules when using an aftermarket standalone fuel pump. For clarity, there are many names for the modern OEM fuel pump driver/fuel computer, but all basically do the same thing; communicate with the ECM to drive the fuel pumps at the speed needed to provide the requested fuel pressure. Most aftermarket ECMs do not have this capability and unfortunately, many OEM fuel system control modules (FSCM) can handle one high-power pump, but not two or more. So, in the search for more power, and to keep the FSCM working, it needs help. That's where VaporWorx Ally PWM fuel pump controller kits come in. These Ally kits allow positive pulse FSCMs to control the primary pump, while the VaporWorx Ally Auto-On controller "piggybacks" and takes care of the other pump(s). The controllers do not turn on the other pumps until approximately 3 to 4psi of boost by using the engine MAP sensor or a VaporWorx standalone MAP sensor as the turn-on trigger. The Ally solution provides sufficient power for all fuel pumps while maintaining the FSCM full CAN feedback and diagnostics, and all pumps will effectively be under the control of the FSCM. Kits are available for naturally aspirated and supercharged applications. Select the kit best suited to your setup. Features: * Everything needed electrically to drive additional fuel pumps -- No hard-to-get connectors, multiple fuses, Hobb's switches, etc. * A 2/3 reduction in power to the fuel pump during idle and cruise vs. traditional systems means long OEM pump life expectancy * 50-amp minimum continuous power rating in a compact controller package * Progressive 2/3 pump ramping strategy lowers the load on the FSCM to reduce MIL codes * Soft-start feature to reduce initial pump-on pressure spikes * Can use either the engine MAP sensor or a VaporWorx standalone MAP sensor * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * Cross-linked polyethylene wiring * UL94 rated components used throughout * Allows all the OEM ECM priming and safety systems to remain functional * Can be used with one or two extra/auxiliary pumps * 10 to 22 V operating capacity
Not Yet Reviewed
$577.15
$519.44
On Sale
Nitrous Outlet X-Series Core EFI plumbing kits include everything you need for a single-nozzle nitrous kit from the main feed line forward. This system is ideal to replace the main components of an existing system or to fill in the gaps if you're trying to piece together a system. It's capable of spraying up to 200 hp! Core Systems come with just the basics; they do not include bottle, bottle brackets, WOT switch, fuel rail adapter, hardware, or wiring. Plumbing kits include: * 90 degree wet nitrous nozzle and fittings * 192 in. 4 AN hose main nitrous feed line * 2 x 24 in. 3 AN hose * 18 in. 4 AN hose * .155 in. fuel solenoid * .078 in. nitrous solenoid * Nitrous and Fuel Jet Pack with one each of the following jets: .014, .016, .017, .018, .019, .023, .024, .028, .030, .031, .035, .036, .041, .052, .062, .078. This jet pack allows for horsepower settings 35, 50, 75, 100, 150, and 200 hp with 45-55 psi fuel pressure * The Core system can be used to upgrade your existing nitrous components, allowing you to retain your existing bottle
( 1 )
$423.99
$360.39
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
