Availability
Showing In Stock Items. Show All 37 Items.
Mishimoto factory fit intercooler boot kits have been released as direct-fit silicone boot kits with DuraCore technology. DuraCore is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, this material provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of Mishimoto boots by preventing leaks and blowouts. To add even more reliability, the kits include constant-tension T-bolt clamps for accurate and consistent holding power. Keep your truck on the road by upgrading to these Mishimoto factory fit intercooler boot kits.
( 2 )
$252.95
—
$372.95
Go Fast Bits VTAs are a performance blow-off valve solution for a wide range of foreign and domestic cars and trucks with an electronic factory diverter valve. If you want sound with your performance (or performance with your sound!), these VTAs offer just that! By combining the proven performance benefits of GFB's ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions. The VTA shares the successful DV+ design philosophy: "Keep what works, replace what doesn't." This means Go Fast Bits retained ECU control and the solenoid from the factory diverter to ensure the fastest possible response time—without the added and unnecessary cost of replacing the solenoid like some brands do. The weak part of the factory diverter has always been the plastic valve mechanism; this is the part GFB has replaced. The VTA features CNC-machined billet components that last a lifetime, and the valve operation method has been updated for better performance. The factory diverter valve can only operate in two states: open or closed. When it opens fully at low boost or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition. GFB pioneered the use of "pilot operation" in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve. It's this design philosophy that makes the VTA not only the best performing blow-off valve solution, but also the best value on the market. Order the VTA Performance blow-off valve model recommended for your vehicle. Key features: * TMS Technology for faster boost recovery on gear shift and during throttle modulation * Improved boost holding ability * Atmosphere venting for blow-off sound * Retains ECU control * Simple, direct bolt-on kits include everything you need to install
( 5 )
$251.10
—
$269.10
CSF intercoolers are a complete, full line of intercoolers--with coverage ranging from Audi to Volvo. Several different styles are available, including plastic-aluminum and all-aluminum, with standard tube and fin cores as well as heavy-duty bar and plate cores. CSF OE-replacement intercoolers provide a drop-in fit requiring no modifications. All CSF intercoolers are built to OE specifications, and incorporate the same high-quality and value that CSF has been known for and has represented in the industry for decades.
( 18 )
$499.00
Turbosmart Kompact EM dual port blow-off valves vent to the atmosphere and back into the air intake. These EM (Electro-Mechanical) BOVs are true plug-and-play upgrade replacements featuring a leak-proof design, lightning fast actuation, and higher pressure handling capabilities, making them high performance substitutes for your factory plastic units. They also allow you to retain complete OE control of their operation. Turbosmart Kompact EM dual port blow-off valves are all-billet CNC construction with high temperature seals and the latest patented technology. They are must-haves for hybrid or larger flowing turbos that utilize OE electronic diverter valves. By not leaking, the EM will achieve target boost without stressing the turbocharger and wastegate. Key features include: * Patent pending integrated pressure control * True plug-and-play upgrade * Integrated proprietary high-temperature solenoid valve * Billet construction with high-temperature O-rings
( 2 )
$303.95
Summit Racing™ OE replacement turbochargers are the best choice to replace your worn out, leaking, or failed original equipment units. With more and more vehicles coming turbocharged from the factory, the reality is that most turbos start leaking or the bearings wear out long before the life of the car or truck does and will need to be replaced. We are proud to offer these replacement turbos for various applications, choose the right one for your car or truck. Check out these features and benefits: * 100 percent brand new construction * Direct-fit left and right available * EM spec-cartridge and turbine wheel * OEM spec-housings on brand NEW tooling: tighter tolerances and better finish * Billet compressor wheel with revised and updated Aero: more torque over OEM and OEM replacements * OEM spec rotating assembly for hassle-free operation and longevity * OEM spec oil feed/drain and coolant inlet/outlet: plug-and-play with your existing oil and coolant lines * Increase horsepower, torque, and fuel efficiency over worn OEM turbochargers
( 3 )
$349.99
—
$399.99
AFCO Racing heat exchangers are designed to replace your factory heat exchanger and provide more efficient intake cooling. They are made from aluminum, TIG-welded, and come in a natural finish, and feature enhanced fin technology for greater airflow. These heat exchangers are direct bolt-in applications that require no modifications to facilitate an easy installation.
( 4 )
$445.99
—
$533.99
Turbosmart Kompact dual port blow-off valves offer high performance, OEM fitment, versatility, and affordability—in other words, everything you need! These BOVs feature dual ports that vent into both the atmosphere and the air intake, reducing turbo lag and eliminating cavitation. Turbosmart Kompact dual port blow-off valves are designed to be bolt-on replacements for plastic factory Bosch or Denso units. They use sequential timing to allow for quieter operation during normal driving, while still providing the benefits of a vent-to-atmosphere type BOV under race conditions. They are easily converted into full atmospheric or full bypass units by using the included port blanking plug.
( 28 )
$251.95
—
$482.95
Get the most out of your diesel truck performance with aFe BladeRunner intercooler pipes. The connecting arms are fully mandrel-bent stainless steel or aluminum tubing that will outflow factory pipes, giving you more power and fuel efficiency. The intercooler pipes free-flowing design aids in decreasing EGTs to help protect your motor from power-robbing heat. BladeRunner pipes are available for these positions: turbocharger-to-intercooler, intercooler-to-intake, and the complete system. The kits come complete with the hardware needed for installation, and a powdercoated finish protects pipes from the elements. Don't let your factory plumbing rob your diesel of power—upgrade with aFe BladeRunner intercooler pipes!
( 19 )
$257.25
—
$541.80
Go Fast Bits Respons TMS direct-fit blow-off valves with TMS Advantage allows you to infinitely vary how much air is recirculated or vented to atmosphere. Simply by twisting the adjustment ring, you can change the sound of your BOV from silent to ear-shattering! GFB's patented venting bias adjustment system can be tweaked between full recirculation (silent) and full atmosphere (loud). With the Turbo Management System (TMS) technology, Respons BOVs can return the engine to peak boost up to 30 percent faster than a factory diverter valve when shifting gears, offers better throttle response, and unlimited boost-holding. If cars like yours typically suffer issues such as backfiring and stalling when using a fixed-ratio atmosphere-venting BOV, the Respons valves can help. By adjusting the venting bias to suit the car you can achieve a blow-off sound without having to put up with the issues.
( 1 )
$307.80
aFe Power offers supercharger power pulley kits for a wide range of applications—including many Dodge, Jeep, and Ram cars and trucks from 2015 and up. These bolt-on kits will enhance your engine's performance. By changing the pulley diameter, you can adjust the spin rate of the supercharger, resulting in increased boost and amplified power. The aFe pulley kits are meticulously crafted to achieve a perfect equilibrium of lightweight design and high strength through precision machining. You can count on them for optimal functionality, a flawless fit, and an impeccable finish, ensuring a seamless boost to your engine's power. The pulleys are available in a variety of diameters; order the model recommended for your vehicle. Additional details: * Pulleys crafted from high-quality 6061-T6 billet aluminum showcase exceptional characteristics. Through precision machining, these pulleys achieve a remarkable balance of light weight and high strength, ensuring not only optimal functionality but also a perfect fit and finish. * Pulley kits feature a 17-4 stainless steel hub, combining corrosion resistance and high strength through precision machining, ensuring a perfect fit, impeccable finish, and optimal functionality. * Please note that special tools are required for removing the factory pulley from the supercharger snout, and aFe recommends professional installation for the kit to ensure seamless performance. * Black hard anodized finish * Laser-etched logo and sizing * Includes screws, washers and Thread Locker * Tuning is recommended * Smaller belt not required
Not Yet Reviewed
$296.10
Turbosmart Kompact EM series blow-off valves are a direct replacement for the factory, electronic diverter valve, created to provide a solution for improved response, boost holding and reliability. These award-winning Kompact EM Plum Back blow-off valves are the world's first truly plug-and-play blow-off valves. Simply unplug and unbolt the OEM blow-off valve and install the Kompact EM blow-off valve unit for your make and model in its place—no adapters, hoses or extra assembly is required. Additional features and benefits: * Billet aluminum construction with Hi-Temp O-rings * Patented integrated pressure control * Integrated proprietary Hi-Temp solenoid valve * Retains complete OE control of the BOV's operation * Plum back vents entirely back into the air intake * Complete unit replacement * True plug-and-play installation
( 2 )
$303.95
Mishimoto intercooler pipe and boot kits improve the power and efficiency of your rig. Unlike restrictive power-robbing factory pipes, Mishimoto polished aluminum intercooler piping is engineered to eliminate unnecessary bends, and needed bends are mandrel-bent to keep the airflow smooth and flowing. And, of course, an increase in airflow results in more power and lower EGTs to support your diesel rig at any power level. These kits include their silicone boots with DuraCore technology that provides superior resistance to heat, pressure, fuel, and oil to effectively increase their life and prevent leaks and blowouts. Adding even more to these kits are Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. Intercooler pipe and boot kits include aluminum Mishimoto M-logo badges. Mishimoto intercooler pipe and boot kits are ideal upgrades in reliability and performance.
( 7 )
$263.95
—
$542.95
On Sale
K&N charge pipes are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes are engineered to reduce turbo charged air pressure loss, as well as dramatically increase air flow from the turbo through the intercooler. Constructed from lightweight aluminum with a durable gunmetal gray powder coated finish, the charge pipes are easy to install with commonly available tools and they are backed by K&N's 10-year/million-mile limited warranty.
( 2 )
$314.99
—
$419.99
$264.99
—
$369.99
Get double the adjustment with Turbosmart dual stage boost controllers! You'll have fast boost response and two adjustable boost levels, plus the best bang for your buck in horsepower upgrades! Turbosmart dual stage boost controllers are built for precision and durability from high-grade brass and billet aluminum. They offer a robust design and a detent adjustment system for accurate and simple boost tuning. They also include a Rocket Launcher switch to toggle between high and low boost on the fly! These manual boost controllers are ideal for mildly modified turbocharged engines and are perfect for increasing boost levels on factory turbo cars and engines. Control the boost on two levels with Turbosmart dual stage boost controllers.
( 1 )
$272.95
Go Fast Bits Respons TMS Universal blow-off valves with TMS Advantage are patented adjustable venting bias system diverter valves. GFB's Respons BOVs allow you to precisely control how much air expels from each of the two outlets, which is key for two reasons. First, you can adjust how loud the blow-off sound is--recirculate all of the air for silent factory operation, vent it all to atmosphere for maximum noise, or set it anywhere in between to suit your preference. Second, you get a blow-off sound without causing stalling, backfiring, or any other BOV-related issues, even on a car with a sensitive airflow meter (MAF). And this is accomplished by simply twisting the adjusting ring. GFB's Respons TMS Universal blow-off valves are not just noisemakers. They also offer better throttle response, faster boost recovery on gearshift, and unlimited boost-holding. Using GFB's TMS (Turbo Management System) principle, tests show that Respons valves can return the engine to peak boost up to 30 percent faster than a factory diverter valve when shifting gears.
Not Yet Reviewed
$307.80
Mororo intercooler tanks are direct bolt-in replacements for the factory tanks. They feature increased capacity and are manufactured from fabricated aluminum for maximum strength. The tanks also include a billet aluminum filler neck, Moroso racing cap in the stock pressure range, and integral billet aluminum hose fittings.
( 6 )
$444.99
Turbosmart Shortie Kompact Series blow-off valves are specifically designed to suit aftermarket and upgraded factory turbos. Unlike standard plastic valves that use single-layer diaphragms (which are known to crack under increased boost), the new Kompact valves use an O-ring sealed piston; coupled with their billet aluminum construction, this allows them to support over 30 psi. These blow-off valves are available as universal models or as a bolt-on replacement for the factory valve on all BorgWarner EFR, KKK, and most Eco-boost turbos. The Kompact Shortie Plumb Back provides better boost response and greater boost handling capability.
Not Yet Reviewed
$267.95
COBB Tuning intercooler hard pipes allow the use of the factory or COBB intercooler core, while cleaning up the engine bay and freeing up airflow to the engine. These hard pipes make great replacements for factory plastic tubing, removing restrictions and improving airflow to the engine. The single-piece hard pipes are formed from mandrel-bent aluminum tubing for fitment on both the cold side and hot side of the intercooler. The results are weld-free pipes from the turbo outlet to intercooler inlet, and from the intercooler outlet to the throttle body. Silicone hose couplings and T-bolt hose clamps are available (depending on application) to facilitate installation. Order the kit designed for your specific vehicle application.
( 1 )
$305.00
—
$480.00
Okay, yes, there are times you wish you could have that signature turbo blow-off sound, but not all the time. Go Fast Bits Deceptor Pro II TMS direct-fit motorized blow-off valves deliver just what you need—the ability to control how loud your BOV sound is, from the driver's seat. Featuring GFB's patented Venting Bias Adjustment System, coupled with remote electronic control, Deceptor Pro II units allow you to infinitely vary how much air is recirculated, and how much is vented to atmosphere. So, if your car typically suffers issues, such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio. This way, you can achieve a blow-off sound without having to put up with the issues. GFB Deceptor Pro II features and benefits: * Adjust your BOV venting bias electronically on-the-fly * Revised porting to optimize flow and venting bias * Compact design fits in most factory valve locations * Bore finishing process ensures a lifetime of reliable operation * Direct bolt-on for most vehicles available * Remote proportional venting bias/volume control- from silent to loud or anywhere in between * Sleek, compact in-car BOV volume controller with backlit dial * End-point adjustment to control maximum vent to atmosphere bias setting * Volume adjustment mechanism driven by a high-torque geared electric motor * Durable, low-friction gear train supported by precision sealed ball-bearing * Supplied with all parts and wiring required to have it up and running quickly and easily
Not Yet Reviewed
$453.60
On Sale
Replace your failure prone rubber hose, plastic pipe, and worm clamps with one of these APR charge pipe and hose kits. APR offers the charge pipe and hose kits as a comprehensive upgrade for the 2.0T EA888 Gen 4 engine that addresses each component between the turbocharger and intercooler, and from intercooler to throttle body. This system increases air flow through smooth an uninterrupted airflow paths, and provides increased performance, turbocharger sound, and reliability by upgrading each of the factory components. Kits do vary, and each kit is comprised of multiple components otherwise sold on their own, which in turn saves you time and money. Order the kit designed to fit your application needs. Charge hose features: * Direct replacement parts * Increases performance through smooth airflow paths and reduced boost leak points * Multi-Ply silicone hose construction resists swelling and tearing * Fluorosilicone interior hose surfaces for oil degradation resistance * Strong Clampco T-bolt clamps for a secure high-boost connection * EZ-Flow stepped interior lips for a smooth airflow path * Full 60mm setup * Black finish * Emissions friendly Charge pipe features: * Direct replacement parts * Increases performance through smooth airflow paths and reduced boost leak points * Strong aluminum pipes that resist cracking and melting like OEM components * Billet aluminum meth/sensor bung with NPT tap (TB inlet pipe) * Billet aluminum MAP sensor bungs (TB inlet pipe) * Removes the restrictive and failure prone throttle body inlet internals (TB inlet pipe) * No-slip bead rolled pipe ends * TIG-welded mounting brackets * Full 60mm setup * Satin black finish * Emissions friendly Turbo muffler pipe and hose features: * Direct replacement parts * Complete system replaces the factory turbo muffler and outlet hose * Increases outlet cross sectional area 66 percent by replacing both parts * Reduces outlet restriction * Increases performance through increased size, smooth airflow paths, and reduced boost leak points * Enhanced turbocharger sound * Faster turbocharger spool with better power delivery * CNC-machined billet aluminum muffler pipe * Integrated PCV vent path * Satin black finish on the turbo muffler pipe * Multi-ply silicone hose construction resists swelling and tearing * Fluorosilicone interior hose surfaces for oil degradation resistance * Strong Clampco T-bolt clamps for a secure high-boost connection * EZ-Flow stepped interior lips for a smooth airflow path * Full 60mm setup * Black finish on the hose * Emissions friendly
Not Yet Reviewed
$799.95
$324.95
Turbosmart Kompact plumb back blow-off valves replace your factory BOV with higher performance! These bolt-on replacements offer a smart choice in OEM fitment and value. Kompact blow-off valves are built tough from black anodized aluminum, providing superior flow and greater structural integrity under boost. Turbosmart flange-type plumb back blow-off valves are available in a range of styles to fit many models—especially those with constrained engine bay access. They're full recirculating, directing all excess pressure back into your intake system. Swap out your factory plastic units for reliability, quality, and value with these Turbosmart Kompact plumb back blow-off valves.
( 8 )
$267.95
—
$466.95
Go Fast Bits Deceptor Pro II TMS Universal Motorized Blow-Off Valves enable you to control the sound of the BOV from inside the cabin! So how much more can you do with a blow-off valve? Well, the Deceptor Pro II takes the 'Respons' concept even further: * Adjust your BOV venting bias electronically on-the-fly * Revised porting to optimize flow and venting bias * Compact design fits in most factory valve locations * Direct bolt on for many vehicles * New bore finishing process ensures a lifetime of reliable operation Additional features: * Remote proportional venting bias/volume control—from silent to loud or anywhere in between * Sleek, compact in-car BOV volume controller with backlit dial * End point adjustment to control maximum vent to atmosphere bias setting * Volume adjustment mechanism driven by a high-torque geared electric motor * Durable, low-friction gear train supported by precision sealed ball-bearing * Supplied with all parts and wiring required to have it up and running quickly and easily * Models available in a variety of inlet/outlet sizes for applications such as Kia, Toyota, VW, Audi, Saab, Subaru, Misubishi, and Nissan
Not Yet Reviewed
$453.60
Standard Motor turbocharger speed sensors are engineered to accurately detect turbo operating speed, clear P0106 trouble codes, and reduce exhaust temperature. These direct-fit OE replacements ensure proper fit, form and function. They're extensively tested to factory specs to assure superior, reliable performance and long service life.
Not Yet Reviewed
$415.99
On Sale
APR carbon fiber intercooler ducts for the Porsche 992 3.0T dramatically lower intake air temperature (IAT) by increasing airflow through the ambient air path of the intercooler cores. In doing so, the engine makes more power and sustains power levels for longer—as IAT is kept away from the knock threshold of the engine and IAT-based power reduction safety routines of the factory ECU. Multiple back-to-back wide-open-throttle acceleration tests proved APR intercooler ducts reduced IAT as much as 9.6 degrees C (17.3 degrees F) or 15 percent better than stock! The APR intercooler ducts are made from carbon fiber, allowing the cooling ducts to be formed to the exact shape necessary to fit into the tight engine bay within the 992's rear-end. The vents allow for maximum flow through the system, while continuing to connect the system to the rest of the factory ducting. Everything simply slides into place with no extra hardware required. A gorgeous matte finish with a gloss APR logo adorns the system, giving it a motorsport-inspired feel, which is unfortunately tucked out of view with the rear bumper installed. Testing: The 911 must be tested on the street, rather than a dyno, to capture real world cooling data. This is especially true because of the rear engine design. In real world driving, air is forced through the cooling ducts differently than it is on a stationary dyno, even with excellent cooling fans. During development, APR engineers fully instrumented the engine to find the limitations of the factory hardware. It was quickly determined the factory intercoolers struggled with airflow through the ambient cooling paths. By redesigning the cooling ducts, more high-pressure ambient air could be forced through the system to maximize effectiveness of the coolers. To illustrate their importance, wide open throttle acceleration tests were conducted for roughly 11 seconds, both with stock cooling ducts and APR cooling ducts. IAT was measured post-intercooler with high-quality thermocouples. Ten back-to-back tests were conducted with each setup, and the results were averaged together. With the stock ducts in place, IAT rose to 66.2 degrees C (151.2 degrees F). This is above the factory knock threshold of 60 degrees C (140 degrees F) and is approaching the ECU power reduction limiter at 70 degrees C (158 degrees F). Once this IAT threshold is crossed, the ECU will begin aggressively reducing engine power to protect the engine. By simply swapping to the APR intercooler ducts, IAT dropped 15 percent, or 9.6 degrees C (17.3 degrees F), leveling off at 56.6 degrees C (133.9 degrees F). This is below the knock threshold and safely away from the power reduction threshold! APR Intercooler ducts are a simple and cost effective upgraded to the 992 3.0T and should be considered by any customer, at any stage of performance, looking to maximize the performance of their 911! Product features: * Improved intake air temperature (IAT) by 15 percent over stock * Organic matte carbon fiber design with gloss APR logo * Lightweight material and design * No extra hardware required * Plug-and-play upgrade * Retains factory intercooler post-housing ducting * Excellent performance per dollar upgrade for the Porsche 911 * Emissions compliant
Not Yet Reviewed
$699.95
$384.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
