Availability
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 440 )
$374.95
—
$605.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$617.95
$287.96
—
$584.95
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$575.95
$305.96
—
$540.95
Breath new life into your 305/350 V8! Edelbrock Performer T.B.I. intake manifolds are stock replacement parts for 305/350 V8s with a factory TBI. They accept all OE equipment and small-bore throttle body injectors.
( 33 )
$519.95
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$595.95
$267.26
—
$540.95
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
—
$484.95
Ford Performance Parts has done it again. You can now put the same intake manifold on your Mustang that comes as original equipment on Mustang Boss 302, 302S and 302R race cars. Ford Performance Parts Boss 302 5.0L modular intake manifolds feature a huge plenum, coupled with short, straight runners, for increased airflow at upper rpm levels without sacrificing low-end torque. They have gone through the rigorous testing to become assembly line parts, so a direct fit and long service life are assured. Ford Performance Parts Boss 302 5.0L modular intake manifolds are manufactured from high-quality, composite materials and provide you with excellent high-rpm flow characteristics. Additional features include: * Includes unique Ford Racing intake badging *O-ring intake gaskets included * Boss 302 Intake Manifold Installation Kit, Part No. M-9444-M50B, is recommended and includes the necessary production components to complete the installation (minor wiring harness modifications required) * Calibration is required to prevent engine damage! * Calibration not included * Boss 302 air inlet tube does not have provisions for aspirator tube hook up common to automatic transmission equipped 2011-14 Mustang GTs
( 19 )
$312.99
On Sale
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.
( 61 )
$562.95
$383.36
—
$506.66
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 140 )
$499.95
$251.95
—
$516.95
Get maximum performance out of your small block Ford with Trick Flow® R-Series intake manifolds. They deliver substantial power increases in the 3,500-7,500 plus rpm range on heavily modified street/strip and race engines. Plus, they're made from A319 aluminum for lighter weight, have integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. For use with square bore four barrel carbs.
( 8 )
$411.99
—
$416.99
AFR Eliminator Series intake manifolds are the perfect way to "eliminate" your competition! These cast aluminum performance intakes have a 23-degree manifold configuration. They're designed for standard location intake port cylinder heads. Additional coolant outlets have been added at the rear of the manifold for custom cooling systems. Eliminator intakes can be run "as cast," right out of the box; however, AFR does recommend having the runner exits be "port matched" to your particular cylinder heads for optimal performance. Additional bungs have been cast into the top of the intake runners for EFI injectors or nitrous nozzles. Multiple heights and rpm ranges are available; order the manifold recommended for your application.
( 24 )
$412.65
—
$497.70
Trick Flow® is no stranger to substantially improving airflow. These replacement EFI lower intake manifold bases are the foundation for Trick Flow's® high-horsepower aluminum EFI intake manifold kits. They're made from A319 aluminum and are computer-modeled to produce maximum torque and horsepower. The bases are available in several styles and finishes for Ford 5.0L, 351 Windsor, 4.6L 2V, 351C, and Clevor engines. Units must be used with corresponding Trick Flow® upper intake plenum.
( 8 )
$399.99
Dual plane Chevrolet Performance Parts' Carbureted LT1 intake manifolds make it possible to take advantage of the advancements found in Generation 2 Chevy engines. They allow you to install a carburetor on your LT1 engine without the hassle of running a computer or emission controls. They accept both Holley and Quadrajet carburetors, and feature longer runners that increase engine torque by up to 30 ft.-lbs. without sacrificing top-end power.
( 28 )
$507.67
On Sale
Weiand dual plane Stealth intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrels and make power from idle all the way to 6,000 rpm. That makes Stealth manifolds the perfect choice for your street/strip vehicle. Order the size and style needed for your cylinder head application.
( 154 )
$449.95
$291.55
—
$429.95
On Sale
Weiand Action Plus intake manifolds are designed for use as stock replacements, with improved power and torque characteristics. They're 180 degree, dual plane types, with a carburetor flange that'll accept either stock or aftermarket performance carburetors. Their effective rpm range runs from idle to 6,000 rpm. With their high-flow runner design and ability to produce increased power with little modification, it's no wonder these manifolds are so popular.
( 65 )
$377.95
—
$412.95
$268.95
—
$340.15
Summit Racing™ Stage 3 dual-plane intake manifolds are based on our Stage 2 intakes, with the same high-rise design, long separated runners, and 1,500-6,500 rpm powerband. For even more power, we added an open area under the plenum, which provides airflow to keep the fuel/air charge cooler. These intakes are the perfect compliment to your street and strip performance upgrades. The cast-aluminum intakes are CNC-machined for a precise fit, and have a square bore flange and natural finish. Chevrolet intakes will clear HEI ignition systems.
( 70 )
$257.99
—
$260.99
Our Summit Racing Max EFI LS intake manifolds feature a curved edge design with a large 9.7-liter plenum, for maximum flow and horsepower. They are available in both tall and low-profile, and satin or black anodized finishes. They include gaskets, mounting hardware, and a billet fuel rail kit.
( 9 )
$499.99
Supercharged Gen III Hemi engines have a relatively large intercooler manifold on the back of the supercharger; therefore, the factory manifold may cause clearance issues in an engine swap into a classic muscle car or truck. Earl's Gen III Hemi Supercharger intercooler manifolds are the solution. They are shorter, providing an additional 1.875 in. of clearance, and allows the use of AN hoses for the coolant. Order the Supercharged Gen III Hemi intercooler manifold recommended for your application. Additional product features and details: * Fits: 2015 and up Gen III Hemi 6.2L Hellcat engines * Billet aluminum intercooler manifold with black anodized finish * Replaces bulky factory manifold * Provides additional clearance at the back of the engine to firewall * 1.875 in. shorter than the factory intercooler manifold; extra firewall clearance in engine swap * Two -10 AN female O-ring ports * Works with factory sensor (3/8 in. NPT female port) and bleeder (1/8 in. NPT female port)
Not Yet Reviewed
$499.95
Trick Flow® replacement EFI upper intake plenums are computer-modeled to produce maximum torque and horsepower. The runner length and cross-sectional taper have been optimized to improve airflow throughout the rpm range—and the symmetrical, high-velocity ports distribute the air/fuel charge evenly to every cylinder. These A319 aluminum castings work well with nitrous and fit under most stock-height hoods for an easy bolt-on installation. They're available in several styles and finishes for Ford 5.0L, 351 Windsor, 4.6L 2V, 351C, and Clevor engines. The plenums must be used with corresponding Trick Flow® lower intake manifold base.
( 17 )
$374.99
—
$464.99
On Sale
Edelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct "line-of-sight" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.
( 53 )
$463.95
—
$569.95
Trick Flow's R Series Intake Manifold is tailored around big cubic inch small block engines producing 600+ horsepower in the 3,500-7,500+ RPM range. Engineers at Trick Flow optimized the R Series intake for their Super 23® 230cc cylinder heads, but found it also performs extremely well on Trick Flow's Super 23® 215cc cylinder heads as well as other brand heads with 215cc and larger ports. The secret to the manifold's success is its CAD-optimized plenum and runner design. Trick Flow engineers incorporated a one-piece single plane, spider type design with a raised floor and a large open plenum, paying special attention to smooth airflow for equalized air and fuel distribution. The design was optimized to eliminate excess material where possible, but enough was left around the port openings so the manifold can be port matched and/or fully ported. Casting it in A319 aluminum keeps the weight low, and integral bosses cast into each runner can be drilled and tapped to accept nozzles for nitrous applications. To back up all the engineering and great features, Trick Flow dyno tested the R Series Intake Manifold to ensure it can propel you to the front of the pack!
( 4 )
$449.99
AFR Magnum Series intake manifolds elevate your big block Chevy engine's power—the ultimate power upgrade. Crafted with precision and engineered to perfection, these manifolds are the key to unlocking a new level of performance for your street vehicle. Designed to seamlessly integrate with AFR's acclaimed Magnum Oval port cylinder heads, the manifolds promise a hassle-free enhancement to your engine's capabilities. Say goodbye to the painstaking task of port matching, as they're a direct bolt-on solution for AFR select cylinder heads. The Magnum intake manifold utilizes a dual-plane design, featuring runners that are custom-tailored for high-horsepower applications thriving in the 1,800-6,200 rpm range. Elevate your driving experience today with an AFR Magnum intake manifold—where power meets precision. Product specs: * Carb flange height: front: 5.22 in., middle: 5.39 in., rear: 5.57 in. * 1,800-6,200 rpm optimal operating range * Designed for a standard/stock block height * 4150 carburetor flange
( 2 )
$348.60
On Sale
Edelbrock Victor Jr. carbureted intake manifolds are capable of supporting up to 600 hp. They accept a standard 4-barrel square bore carburetor. The manifolds are made of high-quality aluminum and feature a natural finish. The required electronic timing control module is sold separately .
( 9 )
$432.95
—
$476.95
$389.66
—
$429.26
On Sale
Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.
( 21 )
$389.95
$350.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
