Availability
Showing In Stock Items. Show All 14 Items.
MagnaFuel QuickStar 300 fuel pumps with filters are built with computer-machined aluminum bodies. They feature a custom-built motor and an exclusive vane/rotor design to provide cool, low-amperage operation without overheating. Compatible with gasoline and alcohol fuel, these pumps use an externally adjustable bypass to eliminate pump cavitation, stabilize fuel flow, and eliminate fuel starvation. They feed engines up to 900 hp and are great for turbo, supercharged, or nitrous assist setups.
( 11 )
$446.99
Holley universal, in-line fuel pumps are intended for fuel injection systems. They are designed to work in-line, not inside the tank, so installation is a snap. They're all rated for continuous duty service and have been tested up to 2,500 hours. The high-output versions are great for serious performance work. These pumps should be mounted below the fuel level of the tank for a good gravity feed on the inlet side. Features include: * OE-proven design * Lightweight and compact * Fits most EFI applications including turbo and supercharged * Not for use on aircraft of any type
( 41 )
$318.95
On Sale
Aeromotive A2000 carbureted bypass regulators are ideal for use with high-volume electric or mechanical fuel pumps of any make, where dynamic flow and rock-steady pressure control are desired. With their unmatched boost reference and high-flow capacity, these regulators are perfect for blow-through carburetor applications with a turbo or centrifugal supercharger. They're available in different outlet sizes and quantities.
( 9 )
$302.35
$272.12
BBK high-volume Performance OEM-style electric fuel pumps are great for stock applications, but were designed to meet the increased fuel demands of modified engines, including those with turbos and nitrous. These easy-to-install, in-tank pumps are available in multiple lph versions to help your modified engine meet its power potential. All pumps come with a new fuel strainer assembly.
( 26 )
$419.99
—
$449.99
On Sale
Aeromotive fuel pumps provide high output as in-tank, electric pumps ideal for applications requiring more flow while retaining the factory lines and mounting provisions (some modifications may be required) available in the original equipment (OE) configuration. They also find use as universal replacements for applications that require more flow to support forced-air power adders like a turbocharger or supercharger. Whether you drive your vehicle for street, race, or everyday driving, enjoy enhanced performance with Aeromotive fuel pumps.
( 2 )
$312.95
$281.66
On Sale
Aeromotive VaporWorx ReturnX return-type PWM controllers have everything needed to provide a standalone fuel pump speed control system. Available for single or dual pump, naturally aspirated or supercharged applications, no switches, relays, or Hobb's switches are needed when using these ReturnX systems. Controllers have primary and secondary output with the primary providing sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. This leader/follower arrangement delivers a smooth ramp-up in pump speed until both pumps are at full output. For carbureted and EFI applications, simply attach the supplied standalone MAP sensor hose to a manifold vacuum source (naturally aspirated) or past the supercharger/turbocharger and make at-idle controller adjustments--the VaporWorx controller will do the rest. Select the single or dual naturally aspirated or supercharged version needed for your setup. Key features: * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent * Standalone MAP-based fuel pump speed control * Carburetor and EFI capability Benefits: * Everything needed electrically to drive the fuel pump(s) * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 40 to 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating range -- Can be used with voltage boosters -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition
( 1 )
$502.90
$452.61
MSD boost adjustable fuel pressure regulators are designed for turbo or supercharged engines. As boost pressure increases, more fuel is required by the engine. These regulators feature a boost reference circuit that adds more fuel in relation to boost pressure. They're easy to install inline, and most units perform in a range up to 90 psi. A performance innovator for decades, MSD is the preferred choice for aftermarket ignition parts throughout the racing industry.
( 2 )
$368.95
On Sale
Earl's Performance Dominator in-line billet fuel pumps are for those of you who are in need of a fuel pump that can support serious horsepower. Have a nitrous system, turbo or supercharger? No problem! These fuel pumps feature a twin-pump design that allows you to use one pump for cruising and both pumps when you activate your nitrous switch or start building boost. The second pump allows you to eliminate the unnecessary recirculating and heating of fuel that can lead to poor performance and hot fuel issues. Earl's Performance Dominator in-line billet fuel pumps also have an added benefit for hard core enthusiasts that run events like the Hot Rod Power Tour or the Baja 1000; that extra pump brings you peace of mind that you'll always finish what you've started. Features include: * Billet aluminum construction for durability and good looks * -10 AN O-ring inlet/outlet for high flow and superior sealing * Suitable for use with carbureted or EFI applications * May be fully submerged in-tank for custom applications, space savings, and reduced plumbing * Compatible with 12 V to 18.5 V systems at pressures up to 80 psi for street or race use * For hardcore race use, both pumps can be wired for full-time duty * Only 7.66 in. long x 5 in. wide x 2.5 in. tall for easy installation on frame rails or other tight areas * Patent pending dual-pump technology * Proven durability beyond 3,000 hours * Weighs only 5.1 lbs.--half a pound less than competitive 1000+ hp pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.
( 1 )
$626.95
—
$649.95
$344.95
—
$357.95
On Sale
COBB Mazdaspeed fuel pump internals can achieve flow rates 50 percent higher than the original pump, essentially removing pump limitations from the equation, even on high-end turbo upgrades. Each piston and cylinder features a high-precision grinding process many times during their manufacture, ensuring that the most precise tolerances are maintained through the final step. COBB Mazdaspeed fuel pump internals are also compatible with COBB Accessport OTS maps.
( 1 )
$435.00
$391.50
All Balls Racing fuel pump modules are designed to restore lost performance on a broken or poorly functioning fuel pump. These electric in-tank modules draw less current than OEM units—while maintaining the same flow rate at working pressure—to reduce operating temperature and extend the life of the unit. Each pump includes a complete module, retaining nut, and gasket. Order the replacement fuel pump module designed to fit your ATV/UTV application.
( 10 )
$257.74
—
$316.19
Quadboss complete fuel pump modules include all the necessary parts to replace your failed original with the same fit and function. They draw less current than OEM units while maintaining the same flow rate at working pressure to reduce operating temperature and extend the life of the unit.
Not Yet Reviewed
$388.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
