Availability
Showing In Stock Items. Show All 27 Items.
Hella fuel pump module assemblies are built to high-quality standards, designed to be easily mounted, and are available in different styles to fit a large scale of applications. They will deliver higher efficiency and the precise fuel supply required for a partial or full load--saving fuel and reducing CO2 emissions. Choose the Hella fuel pump and sender assembly designed for your vehicle.
Not Yet Reviewed
$276.99
Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions, however, of many pumps are compact enough to fit existing hanger assemblies, without modification. All pumping components have been validated to OEM specifications for use in E85/flex fuel applications. Most Walbro in-tank fuel pumps utilize a proven gerotor design. Some high-performance models, including those designed for engines with more than 750 hp, feature a dual-channel turbine design for maximum efficiency in high-pressure and high-temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's higher than conventional pumps. Some pumps require modifications to system wiring, fuel lines, and the fuel module, and should be professionally installed. Installation kits including a fuel strainer, fuel hose, harness pigtail, clamps, and wire connectors are sold separately.
( 371 )
$271.99
—
$314.99
MagnaFuel QuickStar 300 fuel pumps with filters are built with computer-machined aluminum bodies. They feature a custom-built motor and an exclusive vane/rotor design to provide cool, low-amperage operation without overheating. Compatible with gasoline and alcohol fuel, these pumps use an externally adjustable bypass to eliminate pump cavitation, stabilize fuel flow, and eliminate fuel starvation. They feed engines up to 900 hp and are great for turbo, supercharged, or nitrous assist setups.
( 11 )
$446.99
Holley universal, in-line fuel pumps are intended for fuel injection systems. They are designed to work in-line, not inside the tank, so installation is a snap. They're all rated for continuous duty service and have been tested up to 2,500 hours. The high-output versions are great for serious performance work. These pumps should be mounted below the fuel level of the tank for a good gravity feed on the inlet side. Features include: * OE-proven design * Lightweight and compact * Fits most EFI applications including turbo and supercharged * Not for use on aircraft of any type
( 41 )
$318.95
FiTech Force fuel systems make the upgrade to fuel injection easier! They simply connect to a stock mechanical or electric fuel pump, then supply the EFI system with high pressure through the use of an internal 340 lph (approximately 90 gph) pump. The strong, versatile bracket allows mounting under your existing fuel pump, which feeds the units. The assemblies hold a half-gallon of fuel to submerge the internal pump and keep it cool for long life, with no chance of fuel starvation. An internal regulator maintains the pressure at a consistent 58 psi—which is ideal for reliable EFI performance. Order a FiTech Force fuel system and forget about running a new feed line from the tank! Models are available in different configurations. Features, items, and specs: * Serviceable 10-micron fuel filter keeps the finest debris away from the injectors * 5 ft. of high-pressure fuel hose * AN fittings * Clamps * Precision-machined extrusion designed for strength and sealed tight * Easy-to-view fuel pressure gauge installed for quick checks * Heavy-duty wire terminals to complete the installation
( 18 )
$415.00
—
$480.00
On Sale
Aeromotive Stealth electric fuel pumps provide your ride with the fuel it needs to own the road or the track. They feature a compact, lightweight design that will bolt into most existing hanger assemblies, making them an easy upgrade to your fuel system. These versatile components utilize a turbine pumping mechanism that increases durability and allows use in most pulse-modulated applications. Don't settle for lesser fuel pumps; feed your engine with the Aeromotive's Stealth fuel pumps best suited for your application!
( 185 )
$334.70
—
$357.55
$301.23
—
$321.80
Looking for a pump that is quiet, stylish, powerful, and dependable? Holley HP Series fuel pumps feature an exclusive gerotor gearset that quietly and efficiently pumps the fuel without the noise of traditional vane pumps. The chrome motor and trick powdercoated bracket match the mil-spec hard anodized base for unmatched beauty and durability. While these pumps have the capability to feed stout race engines, they are equally at home on the street due to their design and construction techniques. These pumps set new industry standards for appearance and design while providing maximum pumping efficiency. They are equally at home on the street as well as at the races. Features include: * Gerotor design for quiet, smooth operation and durability * Black Mil-spec nickel PTFE hard anodized billet base * Show quality chrome 12 V motor * Profiled, black powdercoated mounting bracket * Laser engraved Holley logo and inlet/outlet designations * 3/8 in. NPT inlet and outlet fittings
( 105 )
$436.95
On Sale
Feed your beast with an Aeromotive A750 fuel pump. Beautiful, compact, durable, and reliable; these pumps will fuel the fire whether it's naturally aspirated, nitrous enhanced, blown, or turbocharged. Designed to fuel anything from 150 to 800 hp, A750 fuel pumps flow over 450 lbs./hr. at 45 psi. Order the ultra-high performance model you prefer for your vehicle application.
( 9 )
$509.25
$458.32
MagnaFuel QuickStar 275 fuel pumps are built with computer-machined aluminum bodies. They feature custom-built motors and an exclusive vane/rotor design to provide cool, low-amperage operation without overheating. Compatible with gasoline and alcohol fuel, these pumps use an externally adjustable bypass to eliminate pump cavitation, stabilize fuel flow, and eliminate fuel starvation. They feed engines up to 700 hp.
( 14 )
$314.99
MagnaFuel QuickStar 275 fuel pumps with filters are built with computer-machined aluminum bodies. They feature custom-built motors and an exclusive vane/rotor design to provide cool, low-amperage operation without overheating. Compatible with gasoline and alcohol fuel, these pumps use an externally adjustable bypass to eliminate pump cavitation, stabilize fuel flow, and eliminate fuel starvation. They feed engines up to 700 hp.
( 5 )
$411.99
BluePrint Engines complete EFI fuel pump and plumbing kits are your solution when completing the fuel system on your Sniper, Sniper 2, or any EFI engine such as Hemi or LS. BluePrint expanded on other fuel pump kits by upgrading to stainless braided, PTFE lined, ethanol compatible hose. They also include all the ferrule type PTFE aluminum AN fittings to make your system safe, clean, and look great! You're given all the necessary hose ends, mounting clamps, pump, drop tube, etc. to get the complete job done! AN- O-ring fittings are also included for use if pairing with a BluePrint engines fuel pressure regulator! Features and benefits: * Free flow rate: 80 gph * Maximum pressure: 60 psi * Inlet attachment: Female threads * Inlet size: 10mm x 1.0 * Inlet quantity: One * Outlet attachment: Female threads * Outlet size: 10mm x 1.0 * Outlet quantity: One * Quantity: Sold as a kit * Includes: 40 ft. of 3/8 in. PTFE stainless braided fuel hose * Post pump fuel filter * Necessary hardware and bulkhead fitting to return fuel into the tank * Note: the included insulated mounting clamps are sized to allow both feed and return line to be run side by side and neatly fit into a single clamp * Forced induction horsepower at 60 psi: 530 hp * Naturally aspirated horsepower at 60psi: 690 hp * Similar to Holley 526-7 kit. Perfect for use with Hemi, LS, and Holley sniper systems such as 550-510-3XX and 550-511-3XX
Not Yet Reviewed
$499.95
Summit Racing™ fuel surge tanks and kits are a simple solution to upgrade your fuel delivery system when installing power adders or converting to EFI. The surge tank is filled with fuel from your stock mechanical pump or in-tank electric pump; and then the high-output pump(s) take over and feed the engine what it needs from the surge tank to make big, reliable power without the risk of starvation. These kits are available in various styles and pump options; choose the model that best fits your application.
Not Yet Reviewed
$329.26
—
$468.94
Delphi fuel lift pumps won't let you down. These quality lift pumps will provide the right volume of fuel from your tank to feed your fuel injection pump. Maintain smooth power and performance with Delphi fuel lift pumps.
( 7 )
$292.99
—
$414.99
Holley 340 lph fuel pump modules feature billet pump flanges that connect to either single or dual 340 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 340 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
Not Yet Reviewed
$516.95
JMS Chip PowerMAX FuelMAX V2 are devices that truly deliver! These fuel pump voltage boosters provide clean continuous voltage and the highest amperage available to provide maximum power and fuel for your vehicle. Up to an 80 percent increase in fuel delivery is possible to feed your high performance engine! The maximum output voltage range is user selectable and is controlled by a knob in the faceplate, or via the optional in-cabin over-ride control knob that adjusts voltage on the fly. These JMS voltage boosters are pre-engineered for use on most Dodge, Ford, GM, and import vehicles—as well as most any others utilizing an electronic fuel pump. PowerMAX FuelMAX V2 units feature proprietary enclosures and industrial heat-sink, with 10-gauge heavy-duty wiring and either 40 or 80 amp fuses—along with a host of innovative features to further improve your experience. For users that want the ultimate in easy installation, the plug-and-play option connects directly to the FPDM (fuel pump driver module) and activates via monitoring the pedal position sensor (PPS), eliminating the need to run wires through the firewall. Also available is a universal device that is easy to wire in--just cut and splice a single wire. Choose from single or dual inputs/outputs, cut-and-splice or plug-and-play versions, and 3-ways to trigger boosted output. Kits include: * PowerMAX device * Heavy-duty OEM-grade wiring harness * User adjustable Hobbs pressure switch * 1/8 in. NPT adaptor fitting * Wiring terminals * Wire splices and heat shrink * Solder * Vacuum line and tees * Mounting hardware * 40 amp fuses
( 4 )
$409.75
Radium Engineering fuel pump hangers permit the use of one, two, or three aftermarket pumps in the stock MK4 Toyota Supra (JZA80) fuel tank. Features include: * Drop-in OEM replacement * 8 AN male pump outlet * 6 AN male return inlet * Fuel starvation protection * High current electrical hardware * Compatible with various pumps (Walbro, AEM, etc.) * Anodized aluminum construction To simplifying aftermarket -AN hose plumbing, the 10 AN ORB threaded feed port features a low-profile 8 AN male fitting, and the 8 AN ORB threaded return port features a low-profile 6 AN male fitting. To reconnect the OEM return and vent hoses, 8.5mm barb fittings are also included. No permanent modification to the OEM fuel tank access cover is required. The custom designed stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low-profile design keeps all wiring tucked nicely underneath the OEM fuel tank cover using the provided foam insulation. Nonconductive acorn nuts are provided to prevent any accidental short circuits. The high quality in-tank wiring is insulated with chemically resistant ETFE. Electrical hardware is included for the fuel pump(s), OEM level sender, and OEM temperature sensor. One issue with all Supra fuel pump hangers is the lack of fuel starvation protection. In these kits, the flow from the FPR return line powers a Radium jet pump. Using a venturi-effect, this "mechanical" pump draws fuel from outside the sub-tank and distributes it directly to the pump inlets.
( 1 )
$427.45
—
$512.95
GMB electric in-tank fuel pumps are tested for function and performance. Built to OE specs under strict manufacturing guidelines, they work and look just like the factory sending unit. Malfunctioning fuel pumps deplete the effectiveness of your engine and your vehicle as a whole. GMB pumps are built to feed fuel from the tank and transfer a constant flow of fuel to the engine, while controlling pressure to prevent flooding. Order the replacement model designed for your year, make, and model application.
( 11 )
$250.99
—
$529.99
Delphi fuel injection pumps feed your gas or diesel engine. Precisely delivered fuel keeps your engine running smoothly and provides the right amount of fuel to gain power. These Delphi pumps are built from quality materials and are validated by Delphi to ensure the best performance in your rig. Give your cylinders equal shots of fuel for better performance with Delphi fuel injection pumps.
Not Yet Reviewed
$276.99
—
$598.99
Clearance
Bosch direct-injection high-pressure fuel pumps are responsible for compressing the fuel supplied by the electric fuel pump to the pressure required for high-pressure injection up to 20 MPa (200 bar). These premium pumps have a compact, lightweight design with integrated pressure limiter valve and a pressure damper capable of variable feed pressure. They are produced in the same production lines and are built, then tested to the same exacting quality standards as Bosch OE fuel pumps to ensure a long, reliable service life. Get the job done right the first time, every time; choose the Bosch high-pressure pump for GDI designed for your vehicle.
( 1 )
$356.99
$305.50
From the racing minds at the Lingenfelter lab, their fuel pump kits will quench the thirst of most any vehicle's automotive power plant. With some models capable of up to 1,000 hp, these kits are available for gasoline, as well as E85 fuel vehicles. They have various flow rates to feed stock to custom speed machines. These fuel pumps are also available for electronic, as well as mechanical fuel management systems, so find the best fit for your application.
( 5 )
$417.95
On Sale
FUELAB universal in-tank brushless fuel pump kits provide everything needed to get up and running with the latest pump technology. Designed for easy installation with many popular options, each kit includes a brushless fuel pump, PWM pump controller, 3-wire hermetic bulkhead feed-thru, pre-filter, wire leads and hardware. Order the kit best suited for your application.
Not Yet Reviewed
$475.00
—
$550.00
$427.50
—
$495.00
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 251 )
$299.99
Generation III and IV small blocks are perhaps the most popular LSx engines for swapping--and the powerful GM V8s require equally effective fuel delivery. Summit Racing™ universal LS-style fuel systems incorporate both the fuel filter and regulator into one efficient, affordable unit. These 255 lph fuel pumps channel a precise 58 psi of juice to the "dead head" fuel rails inlet, returning any excess from the filter back to your tank. It's a system very similar to those used in factory LS performance cars, a simple fuel solution for car and truck owners who jettison their stock powerplant for a coveted LS. Summit Racing™ universal LS-style fuel systems also include 20 ft. of braided fuel line, as well as -6 AN inlet and outlet fittings in a black or blue anodized finish. (The kits are intended for use with a fuel cell or modified/aftermarket tank with AN outlets and returns.) Summit Racing™ also offers the filter and fittings in a smaller kit for those who don't need the entire system.
( 6 )
$312.37
—
$334.81
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
