Availability
Showing In Stock Items. Show All 58 Items.
On Sale
The amazing HydraMat fuel pickups feature Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks, as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. The Holley HydraMat fuel pickups are the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. Holley HydraMats are available in various sizes and shapes to fit a wide variety of stock fuel tanks and/or race fuel cells. Features and benefits: * Patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells * Greatly reduces the potential for air to enter into the fuel system which can result in poor engine performance and/or engine stalling * Perfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions * Surface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered * As an area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available * Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions * Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity * Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump * Can be folded and compressed for easy installation through a variety of fuel cell openings * HydraMats are also available in other sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells * Not for use with diesel fuels
( 64 )
$309.95
—
$499.95
$278.95
—
$448.95
On Sale
Holley boost control solenoids are designed for optimal performance when using the boost control function of Holley EFI. Some setups require two solenoids and some require one. They're driven by a Pulse Width Modulated (PWM) output of the ECU. It is advised NOT to use the PWM+ outputs on a Holley HP ECU, but rather use the PWM- outputs. If you have a Holley Dominator ECU, use either the PWM- outputs or a PWM+ output on the J2B connector.
( 4 )
$449.95
$403.95
On Sale
Holley bypass fuel pressure regulator kits are part of a complete line of fuel system products from Holley. Offering several different kits, each features a billet or diecast aluminum regulator with an adjustable psi for precise fuel pressure changes and they are finished for corrosion resistance and good looks. The regulators are fitted with a 1/8 in. NPT gauge port and include an Earl's fuel pressure gauge, three adapter fittings, a barbed fitting for the vacuum port, a mounting bracket, and all necessary hardware. Choose the kit to best fit your project's needs and performance.
( 30 )
$299.95
—
$349.95
$269.95
—
$314.95
On Sale
These machined aluminum EFI fuel rails are capable of handling 1,100+ hp engines. They feature a large inner diameter bore to decrease fuel pressure drop and help cancel out back pulses.
( 54 )
$338.95
—
$415.95
$305.05
—
$373.95
On Sale
Nitrous Outlet has a selection of nitrous oxide bottles made from powdercoated machined aluminum or lightweight spun carbon fiber that will add a show-quality appeal to your setup. They are available in capacities to suit many applications. Feed your vehicle power juice from Nitrous Outlet nitrous oxide bottles.
( 6 )
$345.99
—
$405.99
$294.09
—
$345.09
On Sale
Nitrous Outlet nitrous conversion kits upgrade your single nozzle wet system to a plate system. Machined from billet aluminum, black anodized, and CNC-engraved, these kits include all the needed hardware and jetting to make your conversion easier. The injection plates have six specially designed nitrous and fuel discharge ports that completely saturate the air intake charge with the best atomized mixture possible. All plates are flow-tested to ensure proper performance. They work with any brand wet system and have -3 AN inlet fittings for fuel and nitrous. Order the kit recommended for your vehicle.
( 1 )
$305.99
—
$375.99
$260.09
—
$319.59
On Sale
Holley universal, in-line fuel pumps are intended for fuel injection systems. They are designed to work in-line, not inside the tank, so installation is a snap. They're all rated for continuous duty service and have been tested up to 2,500 hours. The high-output versions are great for serious performance work. These pumps should be mounted below the fuel level of the tank for a good gravity feed on the inlet side. Features include: * OE-proven design * Lightweight and compact * Fits most EFI applications including turbo and supercharged * Not for use on aircraft of any type
( 41 )
$318.95
$287.05
On Sale
Aeromotive carbureted adjustable fuel pressure regulators are excellent upgrades from the popular standard 2-port designs. These regulators re-seat after the needle shuts down, preventing pressure creep. They're ideal for carburetor and dedicated nitrous applications where higher flow, quicker response, and less pressure creep are desired. A mounting bracket is included. The units are available with different inlet/outlet options, as well as pressure ranges.
( 72 )
$380.35
$342.32
On Sale
Street Demon carburetors redefine street carburetors with clean looks and ease of use. They offer enthusiasts a straightforward design to deliver stable idle, amazingly crisp throttle response, and smooth performance. With optimized calibration and a dual mounting pattern, they are ready to run right out of the box. The carburetors feature an integrated fuel bowl/main body design with the gasket above fuel level and have no plugged passages, eliminating all potential leak paths. Additional features include: * Available with either a ball burnished aluminum, polished aluminum, or black aerospace composite fuel bowl * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * Dual mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold. Adapter may be required. * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 388 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
AEM Electronics Tru-BoostX gauge-type controller kits combine the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more boost, press the button on the right of the gauge face, and if you want less boost, press the button on the left of the gauge face. It's that simple, and it works! AEM Electronics Tru-BoostX gauge-type controller kits contain everything you need, including an on-board 80 psig pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting, and a low-side output for a warning light. AEM includes a boost control solenoid that is specifically manufactured for automotive boost applications. This means that it will not corrode and stick from exposure to rich fuel mixtures, is pressure-tested to 100 psi, and includes -4 AN fittings to eliminate any chance of leaks.
( 3 )
$380.95
$342.85
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 56 )
$339.99
—
$379.99
$319.99
—
$339.99
On Sale
FASS Fuel Systems Dodge replacement lift pumps are designed to replace a faulty factory pump in Dodge Cummins 24-valve diesel engine applications. They will connect to the stock fuel fittings and wiring harness; and increase fuel flow beyond the capabilities of the OEM lift pump. Order the model recommended for your vehicle and engine application. Additional details: * Larger, more powerful motor * Direct fit * Simple installation * Some pumps include installation hardware * Supports Cummins common rail engines
( 86 )
$306.85
—
$369.55
$276.16
—
$332.60
On Sale
Holley Sniper 3.5 GPM Twin Pump and Manifold Kits are designed for high performance naturally aspirated and forced induction EFI vehicles. The twin pump manifold utilizes -10 AN male inlet and -8 AN male outlet connections for easy installation on new applications and for quick replacement of existing competitor fuel pumps. They support over 1,000 hp Compatible with Gasoline or E85. The Max Flow is 3.5 gpm @13.5V and 4 gpm @18V. The pump manifold assembly is made from billet, anodized, and laser etched for good looks. The manifold inlet and outlet manifolds have 2 ORB ports each to accommodate for different mounting and plumbing situations. Plugs are included to seal off unused ports. The kit includes connectors, seals and detailed assembly instructions. Holley Sniper 3.5 GPM Twin Pump and Manifold Kits feature: * Max amperage: 20A (per pump) * Rated for gas and E-85, pump life will be diminished if used with 100 percent ethanol fuels * Billet, anodized, laser etched components for good looks * Manifold -10 AN male inlet fitting and -8 AN male outlet fitting included, others must be purchased separately * Pump I/O: -8 AN ORB * Pumps can be staged or ran in parallel * Inlet and outlet manifolds have 2 ORB ports each to accommodate for different mounting and plumbing situations. Plugs are included to seal off unused ports * Wiring kits for each pump that contain connectors and seals included * Detailed assembly instructions included * Can be used in both EFI and carbureted fuel systems
( 2 )
$435.95
$391.95
On Sale
Flowmaster Delta Force cold air intakes are the elite kits you can call upon to help attain maximum performance and efficiency for your vehicle. All systems feature ultra-trick looking durable cross-linked polyethylene intake tubes with a large high-flow conical shaped air filter ensuring it will trap more dirt/dust particles than the typical filter. They are highlighted with Flowmaster logos to show others you're serious about quality and performance. Installation is easy utilizing factory mounting points. Take "operation cool airflow" to the next level with the addition of Delta Force cold air intake kits. Flowmaster Delta Force cold air intakes feature: * Roto-molded cross-linked polyethylene (XLPE) high-flow intake tube * Custom-designed black powdercoated air dam with foam rubber seal * Reusable/cleanable air filter * Multi-layer reinforced silicone couplers * Anodized aluminum fittings * Stainless steel hardware * No tuning required
( 8 )
$362.95
—
$549.95
$274.95
—
$470.95
On Sale
Aeromotive belt pump ultra high-flow adjustable EFI regulators are designed for use with EFI belt-driven fuel pumps developing over 200 gph. They feature two CNC-machined stainless steel vacuum/boost fittings and a classic Aeromotive Type II bright dip anodized finish on the body and cap.
( 3 )
$424.35
$381.92
On Sale
Aeromotive's Pro-Series Boost Reference EFI regulators are designed to deliver enough flow to support a whopping 2,000 hp! They're perfect if your application requires one or even two Pro-Series pumps. The Aeromotive Boost Pro-Series regulators feature two CNC-machined stainless steel fittings so that you can reference boost, and they have extra ports available for pressure gauges and transducers. These regulators include Aeromotive's exclusive AN cutoff tapered flare fittings, O-rings, and port plugs.
( 4 )
$302.35
—
$479.55
$272.12
—
$431.60
On Sale
Steeda's CNC-machined billet charge motion plates are superior upgrades for your Mustang. Steeda's charge motion plates are designed for a better port match to the intake manifold and cylinder heads than the original plates, reducing turbulence and improving airflow in the intake path for more horsepower and torque. Beautifully CNC-machined out of 6061-T6 aluminum for superior strength and light weight, Steeda's charge motion plates are available with tapped nitrous fitting holes for custom nitrous applications.
( 6 )
$349.95
$314.99
On Sale
Nitrous Outlet digital inline nitrous pressure gauges give you an accurate measurement to within +/-.2 percent and are battery-powered for a clean install. The LCD backlit gauges install inline with your nitrous system's main feed line, and are available with fittings for -4 AN, -6 AN, and -8 AN lines. The precise readings allow drivers to monitor nitrous pressure and close the main feed line if needed.
( 1 )
$425.99
—
$496.99
$362.09
—
$422.44
On Sale
K&N 63 Series aircharger high performance inlet tubes run from the air intake to the turbo, increasing airflow by removing the restrictive sections of your stock inlet tubes. The increase of airflow to the turbos guarantees faster spooling and more power, plus pairing these inlet boost tubes with a K&N intake will deliver even more performance benefits to your vehicle. Choose the tubes designed for your vehicle. Features: * High-density cross-linked polyethylene construction * Stainless steel clamps * Less pressure drop at turbo inlets * Retains all OEM fittings and connections * Compatible with OEM and K&N intakes for any application * All required hardware is included
( 3 )
$419.99
$369.99
On Sale
Holley 450 lph fuel pump modules feature billet pump flanges that connect to either single or dual 450 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 450 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
( 2 )
$549.95
$493.95
On Sale
Holley 340 lph fuel pump modules feature billet pump flanges that connect to either single or dual 340 lph pumps. They are compatible with gasoline and E85, and come pre-installed with new level and tank pressure sensors, as well as provisions to connect to the factory EVAP system for EPA compliance. Each Holley module also comes with all the parts and pieces necessary to complete the installation, including a 3 in. x 11 in. Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel, eliminating starvation under hard acceleration or cornering. Holley 340 lph modules are all return style and all connectors used are DTM style. Choose the single or twin pump module for your car. Additional features and contents: * Anodized and laser-etched billet 6061 T-6 flange with 6AN ORB ports for feed, return, and vent * New gasket to complete installation * Wiring pigtails for the level sender and fuel pump * Fittings to connect to the factory 3/8 in. quick-connect feed and return lines * Flanges have been designed to be compatible with feed and return line sizes up to -8AN * Step-down butt connectors included to wire level sensor * Can be connected to factory EVAP system (with use of 12-874 and 935056ERL--sold separately)
Not Yet Reviewed
$516.95
$464.95
On Sale
Holley Sniper GPA Series in-tank fuel pumps feature oven-brazed fittings that can withstand up to 100 psi. Designed for Sniper EFI fuel tanks, each of these electric fuel pump assemblies includes a genuine Walbro fuel pump. Additional features include: * 1/4 in. NPT supply and return line * In-tank wire harness * Heavy 10-gauge no-warp mounting plate * Barbed vent fittings
( 3 )
$475.95
$427.95
On Sale
MSD Atomic EFI billet fuel rails are the perfect complement for your Atomic AirForce intake manifold. Whether you're looking for just rails, or complete kits with all the necessary plumbing--these fuel rails will have you looking for any excuse to pop the hood. They feature a bright dip, black anodized finish with laser-etched logos and a 5/8 in. diameter fuel passage flow capacity for high-horsepower applications. Make your engine look as good as it performs with MSD Atomic EFI fuel rails. Features, specs, and parts may include: * Fuel rails are machined to accept large -8 (3/4 in.-16) O-ring fittings * Includes mounting brackets and hardware * Includes four -6 to 3/4 in.-16 O-ring adapters
( 1 )
$368.95
$332.05
On Sale
NOS Pro Race Fogger Professional kits have logged many hours of research and development at the race track. They're available with soft plume fogger or annular fogger nozzles. The kits also feature new distribution blocks and solenoids. The distribution blocks are manufactured from billet aluminum and are bright dip anodized in red and blue. They also use 3/16 in. compression fittings that are compatible with hard line or poly line. NOS Pro Race Fogger Professional kits include a new Pro Race nitrous solenoid, featuring a proprietary plunger material that resists swelling, and yet seals as well as Viton®-type material. The nitrous solenoids have a blue powdercoated housing and the Cheater fuel solenoid has a red powdercoat for easy identification. Achieve up to an additional 800 hp with select NOS Pro Race Fogger Professional kits.
( 3 )
$949.95
$522.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
