Availability
Showing In Stock Items. Show All 15 Items.
On Sale
AEM Electronics Tru-BoostX gauge-type controller kits combine the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more boost, press the button on the right of the gauge face, and if you want less boost, press the button on the left of the gauge face. It's that simple, and it works! AEM Electronics Tru-BoostX gauge-type controller kits contain everything you need, including an on-board 80 psig pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting, and a low-side output for a warning light. AEM includes a boost control solenoid that is specifically manufactured for automotive boost applications. This means that it will not corrode and stick from exposure to rich fuel mixtures, is pressure-tested to 100 psi, and includes -4 AN fittings to eliminate any chance of leaks.
( 3 )
$380.95
$342.85
On Sale
AEM Electronics water/methanol injection kits allow you to increase boost pressure and advance timing without having to run higher-octane fuel resulting in significant horsepower gains.
( 35 )
$549.95
$493.95
On Sale
These AEM Electronics water/methanol injection pump and jet kits are intended for those who don't have room to mount even a one gallon tank, resulting in the use of the factory washer bottle. Kits include: * Check valve integrated into the nozzle that prevents unintended fluid flow * Boost referenced progressive controller * One injector and three nozzles to cover a wide range of horsepower levels * High-pressure 200 psi recirculation-style pump * LED dash light for system status * 20 ft. of injection tubing
( 1 )
$499.95
$448.95
On Sale
FUELAB 529 Series electronic fuel pressure regulators work directly with the FUELAB Prodigy line of fuel pumps to reduce heat build-up and vapor lock conditions related to street/strip operation. Set the pressure mechanically like a traditional bypass regulator and let their demand-based speed control take care of the rest! These regulators generate a signal to the pump to control the return line flow rate. This feature reduces current draw while at low engine output to prevent fuel overheating--which could lead to system failure. Additional info: * Designed for use with FUELAB® Prodigy fuel pumps (41401,41402,41403,42401, and 42402 only) * Patented method for demand-based flow control; able to detect changes in demand before change in rail pressure is realized * Automatically reduces current draw at low flow demand * Additional analog output to track actual fuel system capacity * Independent system--no other connections, control boxes, or calibration required * Gasoline, diesel, methanol, and ethanol fuel compatible * Billet aluminum construction with anodized finish * Fine thread pitch for precise pressure adjustment * Versatile mounting bracket and stainless steel hardware * 1/8 in. NPT gauge port with plug for external pressure gauge * 1/8 in. NPT pressure reference port with barbed fitting
Not Yet Reviewed
$550.00
$495.00
On Sale
FUELAB electronic fuel pump controllers are enclosed in billet aluminum cases and are specifically designed to operate DC brushless fuel pumps. They're available in various speed control options and can operate up to 20 amps and 16 volts.
Not Yet Reviewed
$300.00
$270.00
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$399.95
—
$525.95
$285.95
—
$472.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$339.95
—
$632.95
$305.95
—
$493.95
On Sale
Edelbrock Victor Jr. carbureted intake manifolds are capable of supporting up to 600 hp. They accept a standard 4-barrel square bore carburetor. The manifolds are made of high-quality aluminum and feature a natural finish. The required electronic timing control module is sold separately .
( 9 )
$432.95
—
$476.95
$389.66
—
$429.26
On Sale
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 110 )
$284.96
—
$469.46
$256.46
—
$422.51
On Sale
Holley 525 LPH fuel pump modules are designed and engineered to meet the demands of today's high-pressure and high-flow engines with efficiency, reliability, and decades of engineering expertise. These high performance components with OE-quality and fitment in mind will deliver maximum fuel flow throughout a wide pressure range to support major horsepower. Kit includes assembled module, a new filter sock, flange O-ring, and the lock ring to help complete installation into stock fuel tanks. Holley 525 PLH fuel pump module features: * 6061-T6 Aluminum fuel pump module with a 525 LPH (liters per hour) * Sniper pump assembly drops into stock EFI fuel tank on select vehicles * 6AN O-ring outlet and return ports for easy plumbing connections * Can be used with both carbureted and EFI (Electronic Fuel Injection) fuel systems depending on your needs * Supports up to 1200 EFI or 1450 carb (hp at 60 psi at 13.5 V/16.9 amp draw; individual systems will vary based on fuel system design, the regulator type, fuel cell location, etc.) * Flange is bright dip black anodized for corrosion protection from undercar moisture
( 2 )
$431.95
$387.95
On Sale
These Edelbrock Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.
( 2 )
$509.95
$407.96
On Sale
Edelbrock Victor Jr. EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds are designed to replace the stock mono blade throttle bodies and give you throttle body options; fuel rail set, fuel injectors, fuel pump, and regulator are all required (each sold separately). If you decide not to maintain your EFI setup, you can also use these Victor Jr. EFI intake manifolds to convert to a carburetor.
( 10 )
$605.95
$484.76
On Sale
Holley boost control solenoids are designed for optimal performance when using the boost control function of Holley EFI. Some setups require two solenoids and some require one. They're driven by a Pulse Width Modulated (PWM) output of the ECU. It is advised NOT to use the PWM+ outputs on a Holley HP ECU, but rather use the PWM- outputs. If you have a Holley Dominator ECU, use either the PWM- outputs or a PWM+ output on the J2B connector.
( 4 )
$449.95
$403.95
On Sale
Holley EFI Terminator stealth main wiring harnesses are the direct connection for Terminator Stealth EFI systems. They are also perfect for anyone wanting to convert their 2 x 4 supercharged combo over to EFI. These harnesses are plug-and-play, provide a clean finished appearance, and allow for a quick install.
Not Yet Reviewed
$499.95
$448.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
