Availability
Showing In Stock Items. Show All 24 Items.
On Sale
JET Streetmaster Quadrajet Stage 2 carburetors have all the same great attributes of JET's Stage 1 versions—plus the additional benefits of fully recalibrated idle, off idle, main, accelerator pump, and high-speed circuits to match any modifications done to the engine, such as the intake manifold, headers, ignition, or mild cam change. With the JET Streetmaster Quadrajet Stage 2 carburetors, you can expect improved idle quality, and instant throttle response, along with maximum torque and horsepower for street/strip vehicles, tow vehicles, RVs, and watercraft with modified engines.
( 120 )
$499.95
$449.96
On Sale
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 110 )
$284.96
—
$469.46
$256.46
—
$422.51
On Sale
Jet Stage 3 Quadrajet carburetors are intended for serious street/strip and race applications such as Circle Track and NHRA Super Stock classes. An oversized 0.149 in. needle and seat assembly is the start to these fully modified race carburetors. Main well size is increased and balanced to ensure proper top-end, high-rpm fuel flow. The Stage 3 carburetors' extensive circuit modifications are performed to keep the fuel curve correct throughout the rpm range. They will help you to obtain clean idle quality and instant off-the-line response for consistent, race-winning performance.
( 12 )
$499.95
$449.96
On Sale
JET Rochester 2G Stage 1 carburetors are perfect for use in Circle Track racing. JET begins with a .130 in. needle and seat assembly for adequate fuel supply, and a small diameter float for maximum float blow volume. The cluster is then modified, based on engine and vehicle specs, to keep the fuel curve correct throughout the rpm range. Idle, transition, and accelerator pump circuits are modified for each specific application. The 2Gs are then tapped to accept Holley jets for ease of tuning, and finished with a 3/8 in. fuel inlet. Only the highest quality components are used throughout the assembly process as the 2Gs are returned to factory color and condition.
( 14 )
$399.95
$359.96
On Sale
The JET Streetmaster Quadrajet Stage 1 carburetors start with a complete disassembly of the hand selected core, cleaning and inspection procedure. The casting plugs are sealed with epoxy to prevent leak-down into the intake manifold. All circuits are checked for proper sizing and the calibration is checked for proper jets, primary metering rods and secondary metering rods. The carburetor is then carefully reassembled using the highest quality components with a new float, choke pull-off and bronze brushed throttle shafts. Stage 1 Quadrajet carburetors are intended to restore factory stock performance. Not intended for engines with RV or performance type cams.
( 38 )
$499.95
$449.96
On Sale
PRW Q-Jet carburetors are manufactured with all new components. They are a significant upgrade to stock GM carburetors for most GM automotive applications. Every carburetor is designed with precision engineering and cutting-edge features and are equipped with PRW's industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. They are available in 750 cfm for GM cars and trucks with engine sizes ranging from 283-350 cu. in. and 800 cfm for GM vehicles with engine sizes ranging from 350-455 cu. in.—both applications work well with a mild cam or headers for optimum street performance. Choose the PRW Q-Jet carburetor designed for your application needs. Key features: * All new—not rebuilt, or remanufactured * Available for 750 and 800 cfm applications * Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment to allow for precise tuning with ease * Universal replacement for most GM automotive applications * Includes most required vacuum ports * Complete with a one-wire electric choke * Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA * Compatible with "C" and "U" style throttle linkages suitable for stock intake manifolds
( 2 )
$699.89
$499.95
On Sale
JET offers a complete line of marine carburetors to keep your boat motoring the waterways. They are remanufactured using the highest quality parts to meet strict quality standards and ensure high performance for your boat. Don't be left in the wash--power your vessel with quality remanufactured JET marine carburetors.
( 19 )
$499.95
$449.96
On Sale
These AEM Electronics water/methanol injection pump and jet kits are intended for those who don't have room to mount even a one gallon tank, resulting in the use of the factory washer bottle. Kits include: * Check valve integrated into the nozzle that prevents unintended fluid flow * Boost referenced progressive controller * One injector and three nozzles to cover a wide range of horsepower levels * High-pressure 200 psi recirculation-style pump * LED dash light for system status * 20 ft. of injection tubing
( 1 )
$499.95
$448.95
On Sale
PRW Q-Jet marine carburetors are manufactured with all new components. They are a great upgrade from stock GM marine carburetors and are also equipped with PRW's industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. These PRW carburetors are compatible with Mercruiser Marine throttle linkages. They are available in 650 cfm and 695 cfm and meets U.S. coast guard requirements. Choose the PRW Q-Jet marine carburetor that is designed for your application needs. Key features: * All new—not rebuilt or remanufactured * Available for 650 and 695 cfm applications * Universal replacement for most GM marine applications * Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment * Includes most required vacuum ports * Complete with a one-wire electric choke * Meets US Coast Guard requirements * Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA
Not Yet Reviewed
$729.95
$499.95
On Sale
Quick Fuel Slayer Series carburetors offer affordability, great looks, and impressive adjustability. Economical horsepower performance is not a dream! Quick Fuel Technology has engineered their Slayer Series of 600 cfm and 750 cfm street carburetors with everything you want at a price you need to fit your budget. Their hand-built quality and all-aluminum construction are outstanding—but consider these additional features: changeable idle air and high-speed air bleeds, 3-stage emulsion circuits, changeable primary idle feed and power valve restrictions, vacuum secondary adjustment screw, and unique secondary metering plate with changeable jets. Pursue horsepower and get more dollar power with the carburetors that let you tune "your way" and offer show-quality appeal—Quick Fuel Slayer Series carburetors.
( 223 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
Holley 2300 model carburetors are perfect for racing classes where 2-barrel carburetors are required, or for hot rodders looking for something different. These units have many performance features—including a manual choke, center hung float bowl, universal throttle lever, all-metal parts, replaceable jets, a power valve, and high-flow venturi. Holley 2300 carburetors are available in universal and vehicle-specific applications.
( 99 )
$534.95
$480.95
On Sale
These Fogger nozzles' unique flow design provides better atomization of supplemental fuel, as well as more even fuel distribution within the nitrous flow, than other types of nozzles. Changing power levels takes only a couple of minutes and is simply a matter of changing the fuel and nitrous jets on the nozzles. They feature a stamped NOS logo and tags for fuel and nitrous identification.
Not Yet Reviewed
$673.95
$370.95
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
$508.95
On Sale
Street Demon carburetors redefine street carburetors with clean looks and ease of use. They offer enthusiasts a straightforward design to deliver stable idle, amazingly crisp throttle response, and smooth performance. With optimized calibration and a dual mounting pattern, they are ready to run right out of the box. The carburetors feature an integrated fuel bowl/main body design with the gasket above fuel level and have no plugged passages, eliminating all potential leak paths. Additional features include: * Available with either a ball burnished aluminum, polished aluminum, or black aerospace composite fuel bowl * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * Dual mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold. Adapter may be required. * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 388 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$499.95
$448.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$549.95
$493.95
On Sale
Stop wasting money with a leaking fuel tank. The Scott Drake line of fuel tanks is seam-welded and pressure-tested extensively for integrity. They come available in either standard or stainless steel.
( 19 )
$369.75
—
$376.95
$332.75
—
$339.25
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$417.95
$376.16
On Sale
Edelbrock's Performer carburetors feature 2-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves—and the primary venturi booster is a bottom-feed design for smoother acceleration and better drivability. An Owner's Manual is included with every Edelbrock carburetor. The manuals consist of two sections: Section 1, Theory of Operation and tuning procedures which will help you be prepared to develop your own individualized calibration. Section 2, Tuning procedures will take you through a step-by-step procedure that will enable you to achieve a desirable calibration. For added ease of tuning, a Calibration reference chart for your model of carburetor is also included. Performer carburetors are available with a variety of options; select the model that best suits your needs.
( 1475 )
$523.95
$471.56
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$476.95
$429.26
On Sale
Weiand dual plane Stealth intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrels and make power from idle all the way to 6,000 rpm. That makes Stealth manifolds the perfect choice for your street/strip vehicle. Order the size and style needed for your cylinder head application.
( 154 )
$449.95
$403.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
