Availability
On Sale
Our Summit Racing™ LS CNC billet intake manifolds look great and are made to take whatever you can throw at them. They are capable of handling 2,000 horsepower and over 300 psi of boost! Their plenums and bolt-on runners are CNC machined billet aluminum and will not distort or warp under boost. These intakes can accept up to 102mm throttle bodies and include hardware, gaskets, and an -8 AN fuel rail kit.
Not Yet Reviewed
$2,399.99
Performance Design Carbon pTR intake manifolds combine high-quality materials into a flexible and powerful tunnel ram architecture. PA6GF30 glass-reinforced nylon (lower) and 5-layer carbon fiber (upper) shells combine for lightweight, strong, and heat-resistant performance. Offering unique modular velocity stacks enabling 6 1/2 in. to 9 in. runners, multiple accessory port and sensor options along with other custom features, these high-performance manifolds offer easy configuring for a variety of hot rod builds, and can even be reversed on the engine. The plenums feature high-strength carbon fiber with high-temperature epoxy for improved strength-to-weight ratio and reduced heat soak to the fresh air charge. The polymer lower runner pack resists heat soak from the cylinder heads and hides all the ports/sensors in the valley. This combination of materials offers a 10 lbs. weight savings over competitive aluminum tunnel ram manifolds. These custom assemblies are designed for resto-mod, off-road race trucks, race boats, and hot rods where hood clearance is not an issue (they will not fit under late model vehicle hoods). Other product features and specifications include: * Modular velocity stacks for 6.5 in., 8.0 in., and 9.0 in. runner lengths * Raised velocity stack runner entries * Foam-core flange * Anodized billet 105mm forward-facing throttle body flange accepts 90-105mm throttle body * Two MAP sensor locations (front and back) * Two 1/4 in.-NPT ports for PCV, purge solenoid, etc. * One 1/2 in.-NPT port for brake booster or IAT * Tested to over 50 psi of boost * Nitrous nozzle bosses on outboard and valley side of each runner (16 total) * Includes stainless steel hardware for installation * Provisions to run 3 different injector body lengths * Includes molded port, plenum and throttle seals * Optional Carbon pTR ultralight billet -8 AN fuel rails (sold separately) * Optional medium or short velocity stacks (sold separately)
Not Yet Reviewed
$2,199.99
LS Classic Series '62 Chevy Fuelie intake manifold systems are designed to give your LS engine the look of GM's iconic Corvette "flat top" mechanical fuel injection system while using modern technology for ultimate performance. These systems are based on a cast-aluminum, two-piece manifold, just like the originals. These intake systems include billet aluminum fuel rails, all mounting hardware, and gaskets. These systems require GM LS3 OEM fuel injectors and a GM four-bolt, 92mm, drive-by-wire throttle body and are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series '62 Fuelie intake manifold systems are available for rectangular or cathedral-port LS cylinder heads. Order the intake manifold system suited to fit your application.
Not Yet Reviewed
$4,848.95
—
$5,153.95
LS Classic Series classic intake manifold kits are designed to pay respect to the classic muscle cars and trucks of the 1950's, 60's, and 70's while using modern technology for ultimate performance. The intake kits include a single-plane aluminum intake manifold, black anodized billet aluminum fuel rails, a vintage air cleaner assembly, 4150 carb adapter plate, all mounting hardware, and gaskets. These systems require a 92mm GM 4-bolt throttle body and LS3/EV6 or LS1/EV1 fuel injectors. They are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series classic intake manifolds are available to work with rectangular or cathedral port LS cylinder heads. Order the classic intake manifold kit suited to fit your application.
( 1 )
$2,114.95
—
$2,746.95
LS Classic Series '63 Chevy Fuelie intake manifold systems are designed to give your LS engine the look of GM's second generation mechanical fuel injection system found in 1963 to 1965 Corvettes while using modern technology for ultimate performance. These systems are based on a cast-aluminum, two-piece manifold, just like the originals. The intake kits include billet aluminum fuel rails, all mounting hardware, and gaskets. These systems require GM LS3 OEM fuel injectors and a GM four-bolt, 92mm, drive-by-wire throttle body. They are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series '63 Fuelie intake manifold systems are available for rectangular or cathedral-port LS cylinder heads. Order the intake manifold system suited to fit your application.
Not Yet Reviewed
$4,848.95
—
$5,153.95
It's time to choose the centerpiece of your boosted engine build. Second to only the supercharger or turbocharger, the intake manifold will be the focal point of your build illustrating the power and strength of what's underneath. Billet aluminum is the usual choice, but is there something better? Absolutely! Performance Design's Carbon TRc (Tunnel Ram compact) intake manifolds offer you a more distinct, ultra-modern, elegant, and lighter manifold at a lesser cost. An evolution of their Carbon TR naturally aspirated and Carbon TRic (intercooled) boosted intake manifolds, they are the next generation of underhood, short runner models optimized for boost, but do not rule them out of a naturally aspirated application where fitment and aesthetics are preferred over peak torque. They maintain the carbon fiber and billet aluminum construction, manufacturability within a desired price target, fitment under the stock hood, and versatility of subcomponents to be used across a wide range of applications. The modular design of the Carbon TRc intake manifolds start with a carbon fiber one-piece molded plenum. Carbon fiber braided sleeve layers with alternating weave directions are wrapped around a bladder, inserted into a billet aluminum mold, pressed against additional hand-laid carbon fiber fabric, and infused with resin. Vacuum, pressure, and heat are applied creating a plenum that is a strong pressure vessel without seams or bonding capable of handling over 50 psi of boost. Runners are CNC-machined, 6061 T-6 aluminum manufactured in two pieces to sandwich the plenum. A short velocity stack plate is installed inside the plenum and the outer runner bank bolts through the carbon fiber plenum into the velocity stack plate and is sealed with O-rings. A billet aluminum throttle body flange is bonded to the front of the carbon fiber plenum with aircraft-grade adhesive. Billet aluminum fuel rails are also available for port fuel applications or to add port fuel to direct-injected applications. Performance Design's Carbon TRc intake manifolds are available for a wide range of applications, including LT1/LT4, LS3/L92, LS7, LS1/LS2/LS6, Godzilla, Coyote, and Hemi. Select the one designed for your engine in the finish preferred. Specifications and features: * One-piece molded carbon fiber plenum * 6061 T-6 billet aluminum runners and throttle body flange * Nitrous bosses in runners * Factory MAP, PCV, and canister purge solenoid connections * Includes stainless steel hardware for installation * Includes molded port and throttle seals * Intake can be reversed on the engine * Billet aluminum component finishes: -- Raw -- Clear -- Black Cerakote
Not Yet Reviewed
$3,199.99
—
$3,699.99
The LS Classic Series Tri-Power intake manifold kits are designed to pay tribute to the baddest big block Corvettes of the late 1960's while using modern technology for ultimate performance. The intake kits are built around a modified single-plane, dual-carb aluminum intake manifold that requires dual 92mm GM four-bolt throttle bodies and LS3/EV6 or LS1/EV1 fuel injectors and accepts the LS Classic Series Tri-Power air cleaner. These kits also includes 4150 carb adapter plates, throttle body to air cleaner clamp assemblies, mounting fasteners, and cotton gauze air cleaner. These Tri-Power kits also require the use of an engine control unit and harness that will support dual drive-by-wire throttle bodies. LS Classic Series Tri-Power intake manifolds are available to work with rectangular or cathedral-port LS cylinder heads.
Not Yet Reviewed
$2,353.95
LS Classic Series '57 Chevy Fuelie intake manifold systems are designed to give your LS engine the look of GM's iconic original mechanical fuel injection system while using modern technology for ultimate performance. These systems are based on a cast-aluminum, two-piece manifold, just like the originals. These intake systems include billet aluminum fuel rails, all mounting hardware, and gaskets. These systems require GM LS3 OEM fuel injectors and a GM four-bolt, 92mm, drive-by-wire throttle body and are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series '57 Fuelie intake manifold systems are available for rectangular or cathedral-port LS cylinder heads. Order the intake manifold system suited to fit your application.
Not Yet Reviewed
$4,848.95
—
$5,153.95
Mast Motorsports Mozez forward facing intake manifolds are available in standard and tall deck models, with a single fuel rail to fit eight injectors or a dual fuel rail to fit all 16 injectors. These redesigned, new generation Mozez intakes come with an optimized lower intake (casting) fully CNC-ported to match Mozez Gen 2 cylinder heads. The manifolds include a fully CNC'd billet lid, as well as a forward facing throttle body adapter. Get the looks and the go fast, too! Product features: * For standard or tall deck height LSX engine (your choice) * 125 mm Accufab throttle body mounting * Designed Boss to fit blower shop burst panel * Fits GM Gen III and GM Gen IV LS engines * Fits only with Mozez cylinder heads * For racing purposes only * Comes with fuel injector rails and brackets
Not Yet Reviewed
$5,100.00
An engine's cylinder heads and intake manifold must work together as an integrated system to produce maximum performance. The intake charge should make a seamless transition from the manifold runners to the cylinder head ports. Dart has optimized the port shape, the plenum volumes, and the runner angle for each application. These aluminum LS intake manifolds are offered in a variety of configurations, with raw, CNC, or injection ports. The single-plane units are designed for 4-barrel square bore carburetor mounting. Order the style preferred for your LS application.
Not Yet Reviewed
$2,455.01
For the best fit and function, choose Mopar Replacement intake manifolds to replace old, cracked, and worn originals in your Chrysler, Dodge, or Jeep. Manufactured from quality materials, these Mopar parts offer an OE fit for an easier installation—and provide the right look, along with great performance, too! Select the Mopar part application designed for fitment on your vehicle.
( 17 )
$2,202.99
The world famous Holley Tri-Power carburetor system is legendary in Chevrolet circles. They were the ultimate power statement, coming factory on cars like the 1967 427 Corvette. With Holley Tri-Power 3x2 intake and carburetor kits, you can have the same look on your SB Chevy. These setups are perfect for muscle cars, street rods, classic hot rods, rat rods, trucks, and many more vehicles. You can cruise around economically on the 325 CFM center carb, and when you decide to step on it, the two 350 CFM outboard carbs kick in for head-snapping performance! Holley Tri-Power kits are available with dichromate or shiny finish carburetors. Choose your favorite. Systems include: * Weiand dual plane medium rise 3x2 intake manifold * Three Holley 2-barrel carburetors -- Two 350 CFM outboard carburetors -- One 325 CFM center carburetor with electric choke * High-quality steel fuel lines * Progressive throttle linkage * Reusable air filters with polished housings
Not Yet Reviewed
$2,699.95
Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the popular EndraShine finish.
( 7 )
$2,075.95
—
$2,126.95
FAST LSXHR intake manifold intercoolers are a great solution to cool the air charge on a centrifugal-supercharged or turbocharged engine using one of the popular high-ram style intake manifolds, such as the FAST LSXHR composite manifold. The air-to-water intercooler conveniently fits between the upper and lower intake manifold, simplifying the installation, while saving space, time, and cost. Testing conducted on a 1,350 HP/20 psi turbocharged-LSX application showed a 198-degree F drop in temperature and less than 1 psi loss across the intercooler. FAST LSXHR intake manifold intercoolers feature: * Convenient placement minimizes underhood piping fabrication * Large -16AN water inlet/outlets * Welded billet construction * O-ring sealing on both air and water sections‚ necessary hardware included * Durable black powdercoated finish * Designed to work with the LSXHR 103mm intake manifold
Not Yet Reviewed
$2,094.95
FAST EZ-EFI III/IV fuel injection systems with FAST LSXRT intake manifold for GM LS combine the bolt-on XIM coil-on plug ignition system with the revolutionary self-tuning FAST EZ-EFI to give LS applications the easiest, most advanced self-tuning electronic fuel injection system available. Systems include: * FAST LSXRT intake manifold * Big mouth 102MM throttle body * Billet aluminum fuel rails * Fuel injectors * Wide band oxygen sensor * TPS * IAC * Coolant and air temperature sensors
Not Yet Reviewed
$4,975.95
BD Diesel Screamer turbocharger/manifold packages look stock and install like stock, but is anything but stock! Screamer features a larger ballistic billet compressor wheel and BD's exclusive Low MOI QST turbine wheel, resulting in reduced backpressure, quicker response, increased efficiency, and increased turbine flow compared to the competition. The outcome is increased maximum potential power output, right up to 690 hp with supporting modifications. No extra parts to install, just drop-in and enjoy the extra power potential. BD's Screamer turbocharger is perfectly paired with a pulse manifold made from high-silicon ductile iron and designed to withstand extreme temperatures and vibration. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases manifold longevity. Order the package designed for your truck. Key turbo features: * Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel * QST turbine wheel has a 15 percent reduction in MOI (moment of inertia) which results in quicker turbo response * QST turbine blade thickness decreased by 25 percent allowing for higher turbine gas flow and increased efficiency * Each actuator is calibrated and tested prior to shipping * VSR high-speed balanced Manifold features: * Thick-wall casting resists high-heat cracking and leaks for long-term durability * Full EGR compatibility for easy fitment
Not Yet Reviewed
$3,675.00
Nitrous Pro Flow direct port nitrous systems offer maximum horsepower capabilities from 50 to 250 hp. At the heart of these systems is the Nitrous Pro Flow conical discharge dry nozzle, which promotes the expansion of nitrous in a conical pattern upon exiting the nozzle. This helps to more completely fill the intake tract, leading to better distribution from cylinder to cylinder. They include high-flow nitrous solenoids, a nitrous purge solenoid, stainless steel hard lines, and an equalizer distribution block, which provide the best possible distribution of nitrous, while maximizing flow and preventing nitrous phase change. If you're looking for serious horsepower out of your nitrous system, Nitrous Pro Flow direct port nitrous systems are your solution.
Not Yet Reviewed
$3,120.00
Wagner Tuning competition intercoolers replace your OEM unit with performance gains and low intake temperatures. Optimized by CAD, most feature lightweight, low restriction tube and fin construction, with a competition high-speed core and cast aluminum end tanks to give these intercoolers excellent cooling properties with less pressure drop. The design was improved further with flow analyses and simulations. Wagner Tuning competition intercoolers deliver an easy fitment and maximized cooling. They are treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics. Order the model designed for your vehicle application.
Not Yet Reviewed
$2,490.00
On Sale
Summit Racing™ turbocharger replacement kits are engineered packages with upgraded components needed to replace your high-mileage stock turbos. These one-click kits give you what you need to do the job correctly and address some of the shortcomings of the factory system. Check out the features below: * Brand new direct-fit turbos * Cast stainless exhaust manifolds improved flow and durability * Inconel manifold studs and stainless hardware kit * MLS stainless gaskets * Improved coolant line kits
Not Yet Reviewed
$2,441.92
$2,299.99
On Sale
Put the hot in your LS engine with a Summit Racing™ Turbocharger Hot Side combo kit. Our tech experts put together these kits with performance-proven components to help make your turbo conversion a lot easier without the hassle of mixing and matching parts. The many benefits of these LS Hot Side turbo and manifold kits include simplicity and cost-effectiveness, strong mid-to-high RPM power, rapid turbo response, and robust construction. Kits include the following: exhaust manifold, wastegate actuator, gaskets, and hardware for installation. Order the Hot Side combo kit for your application.
Not Yet Reviewed
$2,791.93
—
$3,884.92
$2,499.99
—
$3,199.99
On Sale
FiTech Go Port EFI complete fuel injection systems are offered in two kits, one for up to 550 hp and one for up to 1,050 hp. Each system is supplied with a new aluminum intake machined and fitted with injectors (36 or 80 lb.), fuel rails, wiring harness, and an 850 cfm throttle body. The ECU, with its high-speed processor, is integral to the throttle body along with the TPS, IAC, IAT and MAP sensors reducing wiring and making installation as easy as possible. All setup is handled through the color touch screen monitor with no tuning experience necessary to have your engine ¬rev up and running at its best. Choose the system designed for your engine.
( 3 )
$2,236.00
—
$2,445.00
$2,012.40
—
$2,078.25
On Sale
FiTech Ultra Port EFI LS systems are state-of-the-art kits with transmission control. They are available in a sleek black or a striking brilliant finish, and are designed to deliver unparalleled performance and control for high-powered LS engines. Engineered to meet the demands of serious performance enthusiasts and with the capability to support big horsepower, these advanced systems ensure optimal fuel delivery, precise engine management, and seamless transmission control. Each system incorporates an external Retro Port LS ECU, renowned for its reliability and seamless integration. Whether you are racing on the track or cruising the streets, FiTech's Ultra Port LS EFI systems offer the reliability and power you need. Select the kit needed for your LS engine. Key features: * Universal 4-barrel design with a 4150 flange, the throttle body fits seamlessly on most intake manifolds, ensuring compatibility with a wide range of vehicles * Port injection enhances better fuel control and adjustability for modern performance * Standalone ECU is designed for easy installation, compatible with various timing control setups * System's self-learning software and included handheld controller make for a user-friendly setup * Port Injection to optimize fuel burn and throttle response * Systems simplify the upgrade process and also enhances the aesthetic appeal of any engine bay with their sleek throttle body designs, providing an optimal blend of performance and style * Each Ultra Port package includes: -- An intake manifold -- Fuel rails and injectors -- ECU, sensors, harness, and other supporting components -- Hand-held touch screen monitor with a premium magnetic mount
Not Yet Reviewed
$2,299.00
$2,069.10
FAST XFI 2.0 multi-port complete fuel injection systems provide fully sequential EFI on everything from mild street rods to all-out race engines. They include carefully matched components, including the XFI 2.0 ECU, dual-sync distributor, a single plane aluminum intake manifold, 4-barrel throttle body, proper size Precision-Flow fuel injectors, aluminum fuel rails, fuel pump kit, all necessary sensors (including wide-band O2), professional quality wiring harnesses with labeled connectors. The ECU uses the latest in flash microprocessor technology to deliver a significant increase in processing speed--it can process, analyze, and adjust four times faster than previous EFI systems. In addition, a surface mount component circuit board and billet ECU enclosure give the XFI 2.0 superior durability. And to simplify installation, FAST offers engine-specific XFI 2.0 wiring harnesses featuring clearly labeled connections. The C-Com XFI Windows-based software is easy to navigate and incorporates several previously unavailable features, such as field flashable capabilities that enable you to download the latest software updates via email or directly from the FAST website. Stay current without ever removing the XFI 2.0 from your vehicle. The XFI 2.0 features Qwik Tune technology, which allows ECU programming without a laptop. Preprogram up to four different EFI MAPs, and select the tune-up you need with the flick of an in-car switch. Optimize one setting for everyday driving, others for racing conditions, and still another for improved fuel economy. Other perks include on-board diagnostics, EZ Test indicator lights, five bar MAP sensing, and controls for your power adder and torque converter. The XFI 2.0 also offers enhanced data logging capabilities and memory for analyzing up to eight additional monitored inputs.
Not Yet Reviewed
$4,811.95
NOS LS Hi-Ram intake dry nitrous systems include everything needed for optimum nitrous distribution throughout LS-based engines. Their dry single-stage plate system sandwiches between the bottom base and the top plate on Holley Hi-Ram intake manifolds. Nitrous is then evenly sprayed directly into each cylinder runner. The intake plate is made from 6061 T-6 billet aluminum, and available in a black or clear anodized finish with a laser-etched NOS logo. The included jetting is for up for 250 hp, but the entire system is capable of supporting 1000+ hp. Systems are available with a 10 lb. or15 lb. aluminum, or 12 lb. carbon fiber nitrous bottle.
Not Yet Reviewed
$2,099.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
