Availability
Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI long runner cathedral intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.
Not Yet Reviewed
$2,093.99
—
$2,165.99
aFe BladeRunner GT Series intercoolers feature a bar and plate core design that outflows stock intercoolers by increasing heat dissipation over the much smaller tube and fin design used by the OEM. The unique BladeRunner end tanks are constructed out of 3/16 in. aluminum plates that incorporate seven Multi-Directional Vanes (MDV) throughout the intercooler. This aFe technology is used to direct hot air flow through the entire intercooler core, which allows for greater cooling. aFe BladeRunner GT Series intercoolers are100 percent TIG-welded by certified craftsmen for race-quality strength and durability. They are pressure tested at 200 psi.
( 5 )
$2,007.60
Maximize your diesel truck's performance and pulling power with aFe BladeRunner turbochargers. The turbochargers are optimized for maximum boost response, as well as overall power. The compressor housings are made of premium cast aluminum and feature a ported shroud design that eliminates dangerous compressor surge. Each of these turbochargers feature specifically designed trims that are aimed at maximizing power and throttle response for your given power goal. For maximum boost response and the ultimate torque delivery, aFe BladeRunner turbochargers will help you get there. Order the model that is best suited to your application needs.
Not Yet Reviewed
$1,604.40
On Sale
Our Summit Racing™ LS CNC billet intake manifolds look great and are made to take whatever you can throw at them. They are capable of handling 2,000 horsepower and over 300 psi of boost! Their plenums and bolt-on runners are CNC machined billet aluminum and will not distort or warp under boost. These intakes can accept up to 102mm throttle bodies and include hardware, gaskets, and an -8 AN fuel rail kit.
Not Yet Reviewed
$2,399.99
$1,999.99
—
$2,399.99
Nitrous Express Holley Hi-Ram Plenum Plate Systems take full advantage of the Holley Hi-Ram intake manifold. The Hi-Ram plenum plate bolts right in between the upper and lower intake manifold making the install super clean and quick. These systems inject nitrous and fuel above each cylinder from the side of the runner providing direct port-like distribution without having a flow restricting nozzle or spray bar. The Hi-Ram nitrous plate is made from billet aluminum with passages machined directly into the plate so there is no need to worry about spray bars breaking or spinning. The systems come complete with billet aluminum and carbon fiber Lightning solenoids, stainless steel braided lines, wiring, switches and every nut, bolt and connector needed to install the system. The systems ordered with a nitrous bottle include a billet aluminum Lightning 500 bottle valve and the stainless bottle brackets.
Not Yet Reviewed
$1,624.48
—
$1,872.94
On Sale
Holley continues to push the envelope of intake design with their latest offering: the Sniper fabricated dual plenum intake manifolds! This unique "dual plenum" design offers increased airflow and even dispersion of air to intake ports—solving the two most common problems experienced with many intakes. The manifolds are available in configurations and options for year/make and engine applications from the 1990s and up. Features and benefits of Holley Sniper fabricated dual plenum intake manifolds include: * Dual plenum design—ideal for street max effort engines and boosted applications * 3mm (1/8 in.) thick T-6061 sheet aluminum construction (for durability in high horsepower and boosted conditions) * 100 percent TIG-welded * Available in a choice of bright silver or black anodized finish * Equal runner lengths with tapered intake plenums designed to increase velocity and more evenly distribute airflow to all cylinders * Available in 92mm and 102mm bore throttle body openings * Long intake runner lengths (12.75 in.) offer low-end torque and operating range of 1600-6800 rpm
( 2 )
$1,549.95
NOS LS Hi-Ram intake dry nitrous systems include everything needed for optimum nitrous distribution throughout LS-based engines. Their dry single-stage plate system sandwiches between the bottom base and the top plate on Holley Hi-Ram intake manifolds. Nitrous is then evenly sprayed directly into each cylinder runner. The intake plate is made from 6061 T-6 billet aluminum, and available in a black or clear anodized finish with a laser-etched NOS logo. The included jetting is for up for 250 hp, but the entire system is capable of supporting 1000+ hp. Systems are available with a 10 lb. or15 lb. aluminum, or 12 lb. carbon fiber nitrous bottle.
Not Yet Reviewed
$1,999.95
—
$2,099.95
Edelbrock Cross-Ram LS3 intake manifolds are ideal for anyone looking to combine great looks and outstanding performance between 1,500 - 7,000 rpm. The unique dual-plenum design features 13" long runners with flanges that will accept two, 90mm GM LS3 throttle bodies. The unique cross-ram dual-plenum design is ideal for twin turbo applications. When matched with high flowing air filters and inlet tubes, the dual-plenum system gives neck-snapping performance with plenty of options for engine builders and tuners. The manifolds are available in multiple finishes for that custom look.
( 2 )
$1,795.95
—
$1,995.95
Pro-Filer Performance Products Hitman big block Chevy tunnel ram intake manifolds supply race winning performance out of the box. Available for 9.8 in. or 10.2 in. deck heights, each Hitman tunnel ram base is designed to take your power curve to higher levels without costly hand-porting. They are manufactured from aerospace-spec aluminum alloy (primary virgin ingot), and are truly revolutionary in that they are lighter in weight than most fabricated units, plus their solid cast design helps to reduce resonance, which affects high-rpm horsepower. The cast, pre-ported runners have been designed to eliminate airflow restriction and produce more power. Pro-Filer Hitman BBC tunnel ram intake bases also feature: * Accepts your choice of dual or single-carb top plates * Dimensional consistency far better than fabricated manifolds * Fits the majority of BBC spread port heads with 18, 14, and 12 degree valve angles * Cast bosses for injectors * Recommended for 565+ c.i.d. engines
Not Yet Reviewed
$1,618.45
Performance Design's Carbon HR/pTR Hybrid intake manifolds use their Carbon HR upper combined with the nylon lower from the pTR for reduced height in constrained applications. Short velocity stacks are provided to clear the plenum which results in a total runner length of 6.5 in. These unassembled kits are offered in several cylinder head port configurations and available with a black or red flange. Select the color in the model designed for your engine. You will receive: * Carbon HR with black anodized billet aluminum sealing plate * pTR lower assembly to suit your application * Short velocity stack kit * Stainless steel hardware * Gaskets and seals Note: Long and medium velocity stacks will not fit in this application.
Not Yet Reviewed
$1,599.99
Performance Design Carbon pTR intake manifolds combine high-quality materials into a flexible and powerful tunnel ram architecture. PA6GF30 glass-reinforced nylon (lower) and 5-layer carbon fiber (upper) shells combine for lightweight, strong, and heat-resistant performance. Offering unique modular velocity stacks enabling 6 1/2 in. to 9 in. runners, multiple accessory port and sensor options along with other custom features, these high-performance manifolds offer easy configuring for a variety of hot rod builds, and can even be reversed on the engine. The plenums feature high-strength carbon fiber with high-temperature epoxy for improved strength-to-weight ratio and reduced heat soak to the fresh air charge. The polymer lower runner pack resists heat soak from the cylinder heads and hides all the ports/sensors in the valley. This combination of materials offers a 10 lbs. weight savings over competitive aluminum tunnel ram manifolds. These custom assemblies are designed for resto-mod, off-road race trucks, race boats, and hot rods where hood clearance is not an issue (they will not fit under late model vehicle hoods). Other product features and specifications include: * Modular velocity stacks for 6.5 in., 8.0 in., and 9.0 in. runner lengths * Raised velocity stack runner entries * Foam-core flange * Anodized billet 105mm forward-facing throttle body flange accepts 90-105mm throttle body * Two MAP sensor locations (front and back) * Two 1/4 in.-NPT ports for PCV, purge solenoid, etc. * One 1/2 in.-NPT port for brake booster or IAT * Tested to over 50 psi of boost * Nitrous nozzle bosses on outboard and valley side of each runner (16 total) * Includes stainless steel hardware for installation * Provisions to run 3 different injector body lengths * Includes molded port, plenum and throttle seals * Optional Carbon pTR ultralight billet -8 AN fuel rails (sold separately) * Optional medium or short velocity stacks (sold separately)
Not Yet Reviewed
$1,799.99
Distribution of the nitrous-fuel mix can be a problem on some single-plane manifolds, particularly those for small block and big block Fords. Nitrous Express has those shortcomings covered, however, with their technically advanced Gemini Twin Pro Power Plate nitrous systems. They have billet aluminum distribution plates with stainless steel spray bars and are designed to deliver the mix directly to the intake runners for maximum effectiveness and power production. Kits include: * Nitrous bottle * Stainless steel mounting brackets * Heavy-duty solenoids and relay * "Race hose" supply line and fittings * Switch * Wiring * Mounting hardware * Also available without the bottle
Not Yet Reviewed
$2,084.03
—
$2,107.24
Nitrous Express Gemini Twin Stage 6 nitrous systems are designed to provide the optimum nitrous-fuel mix to the inlets of the intake manifold's runners. That solves problems common to single-plane manifolds, particularly those for small block and big block Fords. Some systems incorporate the Phase 3 "Next Generation" plate, which delivers even better distribution and atomization without spray bars that can sag, split, or upset airflow into the manifold. Kits include: * Distribution plate * Hoses * Fittings * Switch * Wiring * Solenoids * Relay * Mounting hardware * Your choice of 10 lb., 12 lb., 15 lb., or no nitrous bottle
Not Yet Reviewed
$1,932.55
—
$1,955.75
An engine's cylinder heads and intake manifold must work together as an integrated system to produce maximum performance. The intake charge should make a seamless transition from the manifold runners to the cylinder head ports. Dart has optimized the port shape, the plenum volumes, and the runner angle for each application. These aluminum LS intake manifolds are offered in a variety of configurations, with raw, CNC, or injection ports. The single-plane units are designed for 4-barrel square bore carburetor mounting. Order the style preferred for your LS application.
Not Yet Reviewed
$1,541.68
—
$1,637.55
These Quick Fuel QFX-Series carburetors feature an all-new die-cast aluminum main body, which has a lengthened venturi section for greater midrange torque and better airflow. The annular booster venturis are precision die-cast with CNC-machined billet aluminum inserts, providing smoother and more refined air entry, a stronger vacuum signal, less turbulence, and improved fuel emulsion for better combustion. The Quick Fuel QFX-Series carburetors use red anodized billet aluminum CNC-machined metering blocks featuring 3-circuit metering (gasoline carburetors), changeable emulsion, idle feed, and intermediate bowl and feed discharge. Next, the die-cast aluminum fuel bowl combines high strength with significant weight reduction. They feature dual threaded fuel inlets and outlets and dual sight glass holes to easily set the float levels. The Quick Fuel QFX-Series carburetors feature Quick Fuel's external linkage with four different links to select the amount of primary throttle opening before the secondaries open: moderate progressive (25 percent), medium progressive (40 percent), full progressive (50 percent), and 1:1.
( 7 )
$1,528.95
—
$1,888.95
Chevrolet Performance EFI intake manifolds are ideal stock replacements for your worn or faulty original. These multi-port injection models are made from factory-style materials to OE specifications—for a proper fit and flawless performance. Order the manifold recommended for your vehicle application.
( 1 )
$1,717.22
LS Classic Series classic intake manifold kits are designed to pay respect to the classic muscle cars and trucks of the 1950's, 60's, and 70's while using modern technology for ultimate performance. The intake kits include a single-plane aluminum intake manifold, black anodized billet aluminum fuel rails, a vintage air cleaner assembly, 4150 carb adapter plate, all mounting hardware, and gaskets. These systems require a 92mm GM 4-bolt throttle body and LS3/EV6 or LS1/EV1 fuel injectors. They are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series classic intake manifolds are available to work with rectangular or cathedral port LS cylinder heads. Order the classic intake manifold kit suited to fit your application.
( 1 )
$1,521.95
—
$2,114.95
Wagner Tuning intake manifolds deliver greater flow and volume capacity to move your race vehicle past the competition. These intakes are CAD-designed and flow optimized from high-grade AlSi10Mg cast aluminum and then CNC-machined to Wagner's exacting specifications to create performance works of art. They are engineered for your vehicle to produce the ultimate in horsepower and torque--the perfect addition to your performance-enhanced car. Wagner Tuning intake manifolds also feature: * OEM fit and finish for ease of installation * Special surface treatment equal to the new TTRS intake * Some custom provisions may be needed (depending on the application) * Lower air temperature increased throttle response * Smaller size when installed allows for larger intercooler * Tuned intake pulse reduces throttle body valve flutter * Optimized airflow allowing for increased cylinder fill during intake cycle
Not Yet Reviewed
$1,790.00
For the best fit and function, choose Mopar Replacement intake manifolds to replace old, cracked, and worn originals in your Chrysler, Dodge, or Jeep. Manufactured from quality materials, these Mopar parts offer an OE fit for an easier installation—and provide the right look, along with great performance, too! Select the Mopar part application designed for fitment on your vehicle.
( 17 )
$2,202.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
