Availability
Showing In Stock Items. Show All 25 Items.
Nitrous Outlet Stinger Plate nitrous oxide systems feature a second generation Stinger plate designed to work with either 4150 or 4500 flanged carbureted-style intake manifolds. The new billet aluminum Stinger plate has a larger conical cone than the previous version and is based off of the same technology as the Nitrous Outlet Nitrous Puck, enabling them to delivering up to 600 hp with proper jetting. The plate features 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet Stinger Plate nitrous oxide systems include nitrous and fuel solenoids, solenoid brackets, a main feed line, relay, harness, jetting, hardware, and wiring.
Not Yet Reviewed
$1,503.99
—
$1,655.99
Nitrous Outlet 4500 GENIII Stinger nitrous oxide plate systems come out of the box with everything you need to spray up to 500 hp! Nitrous Outlet is proud to introduce their 3rd generation Stinger plate systems. They feature a revolutionary extended-reach cone that sits further down inside the intake plane to prevent nitrous from hitting the sidewalls on intakes with a high plane or spacer plate. Each stinger has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4150 GENIII Stinger nitrous oxide plate systems include everything you need to spray 50 to 500 hp. Overview: * Max-flow 500 hp anodized billet aluminum stinger plate * Single-entry * 4500 flange * 360 degree discharge pattern * Gasket, jetting, and hardware included * E85 compatible with different jetting
Not Yet Reviewed
$1,515.99
—
$1,781.99
Nitrous Outlet 4150 GENIII Stinger nitrous oxide plate systems come out of the box with everything you need to spray up to 500 hp! Nitrous Outlet is proud to introduce their 3rd generation Stinger plate systems. They feature a revolutionary extended-reach cone that sits further down inside the intake plane to prevent nitrous from hitting the sidewalls on intakes with a high plane or spacer plate. Each stinger has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4150 GENIII Stinger nitrous oxide plate systems include everything you need to spray 50-500 hp. Overview: * Max-flow 500 hp anodized billet aluminum stinger plate * Single entry * 4150 flange * 360 degree discharge pattern * Gasket, jetting, and hardware included * E85 compatible with different jetting * Jetting included for 50-500 hp
Not Yet Reviewed
$1,504.99
—
$1,760.99
Waterman Bertha gear pumps offers options for performance. You choose the pump body configuration that meets the desired flow and accepts the necessary gears, then a mounting option (swivel collar, 4-bolt flange, or V-band flange), standard or reverse rotation, and inlet/outlet sizes. Pumps are designed and machined from aluminum and anodized. Waterman Racing Nostalgia LIL' Bertha fuel pumps can utilize up to 1 in. gear sets for up to 23 gpm of flow.
( 1 )
$2,050.99
Bitten by performance! Nitrous Outlet 4500 GENIII Stinger race nitrous oxide plate systems include everything you need to spray 50-600 hp. They feature plates with unique, extended reach, cone-shaped "stingers" with many discharge ports for fuel and nitrous. The design covers a 360 degree pattern that completely saturates the air intake charge for precise, even atomization. These plates are CNC-machined from 6061 billet aluminum with black anodized bodies and red anodized stingers—as well as being engraved with Nitrous Outlet logo and fuel/nitrous ports. Sharpen your track performance with a Nitrous Outlet 4500 GENIII Stinger race nitrous oxide plate system.
Not Yet Reviewed
$1,501.99
—
$1,538.99
Strike a blow for performance with Nitrous Outlet 4150 GENIII Stinger race plate systems. These nitrous systems feature large unique cone-shaped "stingers" that sit further down inside the intake plane with 16 discharge ports—eight for nitrous and eight for fuel. Their 360 degree pattern completely saturates the air intake charge for even distribution. Stinger race plates are CNC-machined from 6061 billet aluminum, and have black anodized bodies, red anodized "stingers," and are CNC-engraved with the Nitrous Outlet logo and fuel/nitrous ports. The assembly includes pre-fabricated hard lines, solenoid, brackets, jetting, harness, and hardware—everything you need to spray 50 to 600 hp. Pierce your nitrous system with the sharp performance of Nitrous Outlet 4150 GENIII Stinger race systems.
( 1 )
$1,526.99
Holley Gen 3 Ultra Dominator carburetors feature a brand new main body, brand new state-of-the-art calibrations, high-volume HP fuel bowls, and sizes up to 1,475 cfm! The metering blocks are fully adjustable (emulsion bleeds, power valve channel restrictors, and idle feed restrictors). These carburetors include redesigned Holley HP fuel bowls for racing. Internal baffling helps to control fuel slosh and minimize float level fluctuations in hard launching or cornering situations. The HP fuel bowls also have material added in key areas (the needle and seat, fuel inlet, and sight window areas) for added strength in demanding race environments and can be plumbed from either side. Some of the many Holley Gen 3 Ultra Dominator carb features include: * Main body 5/16 in. taller than the previous generation * Designed for larger radius air entries optimized using computational fluid dynamics (CFD) software to deliver smoother flow into fully machined, big-bore Venturi * Improved 6061-T6 billet aluminum metering blocks offering improved durability, true gasket sealing (sealing surface integrity), and brightly dipped anodizing for good looks and corrosion protection * Power valve channel restrictors are now machined lower in the metering blocks for improved fuel delivery to the power valve circuit * Accelerator pump channel internally drilled, eliminating the need for an external plug, * Excess material removed for increased fuel capacity * Snap-in-place bowl vent whistle makes removal and/or replacement easier * 20 percent more fuel capacity vs. traditional V-bowl, eliminating fuel starvation and providing consistent air/fuel ratios * Fuel shelf is positioned below the needle and seat to minimize fuel aeration and promote more consistent metering * Fuel trough designed into the floor of the bowl to route fuel flow directly to the jets and assist in keeping them covered by fuel * Clear sight windows on both sides of the bowls for easy and safe fuel level adjustments * Built-in drain plug in the front center of the bowl provides easy access to empty the bowl (contoured entry provides smooth fuel flow directly to the needle and seat) * Designed for use on drag race, Pro Street, or any high-horsepower engines * All-aluminum construction saves 3.8 lbs. over original models (28 percent weight savings) * Dual 50cc accelerator pumps
( 20 )
$1,599.95
—
$1,949.95
More power! FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems are for gearheads interested in major power for road courses or the racetrack, while maintaining overall drivability. These systems combine eight high-flow injectors with an annular discharge increased to 20 streams to handle the massive flow. They fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 1200 hp. The Power Adder Plus features a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it, and the ability to change air/fuel ratios and ignition timing on the fly. To obtain complete atomization, FiTech uses a swirl spray annular discharge called Wet Flow technology, spraying the fuel in from multiple directions. Go EFI 8 systems with mounted ECUs offer spark control without the need for an external spark box or special distributor. To lower temperatures and extend the unit's life, FiTech uses a voltage-controlling fuel pump control, reducing the juice under low loads. Each system has a hand-held controller with touch-screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. Take on the day, no matter what it brings—with FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems. Additional features include: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Two adjustable fan control switches * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace GM-type sensors and Bosch 4.2 wideband oxygen sensors * Nitrous and boost timing retard strategies and target A/F options * Air conditioning idle speed input kick-up * Many safety features and accessories for nitrous tuning control * Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous * Designed for applications making at least 6 inches of vacuum at idle. * Complete tuning from Pro Laptop software, with 8GB of data-logging
( 37 )
$1,597.00
—
$1,727.99
APR DTR6054 turbocharger systems are direct replacements for the EA888 Gen 3 engine. These upgrades include matching software for various vehicles and mods, providing up to 491 hp and 425 lbs.-ft. of torque, depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the Golf R, S3, and TT S platform with fueling upgrades. For dedicated race cars the turbocharger is designed with plenty of headroom to go even further on your own! Designed and developed from the ground up by APR, DTR6054 turbochargers do not require a core and there's no additional downtime. They are built using an aluminum anti-surge compressor cover with appropriate A/R matched to a larger aircraft-grade, 6061 billet aluminum 60mm compressor wheel, a turbine housing cast with high-temperature 310 stainless steel to take the heat and abuse seen on a road course, and a nickel-based superalloy K418 high-flow 54mm turbine wheel. A German dual ceramic ball bearing center section provides smooth and reliable operation with a better transient response, eliminating the factory failure-prone journal bearing design. Each kit includes the complete turbocharger with compressor inlet pipe, compressor outlet hose, T-bolt clamps, gaskets, O-rings, exhaust ring, exhaust V-band, exhaust manifold gasket, studs, bolts, and washers, oil and coolant line O-rings, and APR's ECU upgrades for select vehicles. The upgrade uses your factory electronic wastegate and diverter valve, and connects to your factory exhaust, intake, turbo outlet pipe, and oil and coolant lines. Tested at various road courses, APR's DTR6054 turbocharger systems do not spike torque hard or run on the edge of what the factory rods and pistons have been known to handle, making them as safe on the stock engine as possible for these power levels. Additional features: * Over 30 percent compressor flow compared to the factory turbocharger * Various software levels depending on fueling modifications, including stock fueling * Supports 91, 93, 100, and 104 AKI in all configurations * Supports E60-E85 with fueling upgrades (Golf R/S3/TT S platform only) * VSR balanced turbocharger center housing rotating assembly (CHRA) for reliable operation * Oversized cast turbo inlet pipe connects directly to factory or upgraded intake system * Machined turbocharger speed sensor port with included billet block-off plug * Silicone discharge hose with APR EZ-flow stepped lips included (no turbo muffler) * Integrated diverter valve (DV) port * Available in turbo kit only, turbo kit with low- and high-pressure fuel pump, or turbo kit with low- and high-pressure fuel pump and multi-port injection
Not Yet Reviewed
$2,099.95
Clearance
Garrett GTX Gen 1 Series turbochargers are the posterchild of the company's turbo lineup. These dual ball bearing units have an oil and water-cooled center cartridge. The original GT3582R model paved the way for many performance enthusiasts, earning its place as the best all-around turbo on the market for most peoples' needs. The new billet version makes more power, spools faster, and delivers even better performance. Garrett's ball bearing cartridge has proven its worth in the highest level of motorsports—where it's been the bearing system of choice in CART FEDEX ChampCar Series, 24 Hours of Le Mans, Pikes Peak International Hill Climb, World Rally Championship, and most recently drag racing. These premier racing customers demand no less than the best in durability, reliability, and power-on-demand. One key contributor to this performance lies in the ball bearing cartridge where it is, by design, surrounded by a thin film of oil. The oil film damps out destructive vibrations that would otherwise compromise turbo durability. Turbocharger tech features: * Horsepower: 450 – 700 hp * Displacement: 2.0 - 4.5L * Forged, fully-machined 11-blade compressor wheel * New 8mm ceramic ball bearing cartridge * Ported shroud compressor housing to increase surge resistance * Compressor side: TRIM 58 A/R 0.70 * Compressor air inlet: 4.00 in. * Compressor air outlet: 2.50 in. * Turbine side: TRIM 84 * Bearing housing: Oil and water-cooled system * Turbine housing and actuator not included Note: Garrett has changed the part number on this turbo. The old part number is 803715-5001S and the new part number is 836047-5002S.
Not Yet Reviewed
$2,509.99
$1,899.50
Holley Gen 3 Ultra Dominator Marine carburetors are designed for use on marine high-horsepower engines. They utilize high-capacity fuel bowls with 20 percent more fuel capacity to eliminate starvation, an integrated fuel shelf to minimize fuel aeration, and internal baffling to control fuel slosh. The patent-pending Gen 3 main body is 5/16 in. taller than the previous generation, allowing for larger radius air entries—which are optimized using Computational Fluid Dynamics (CFD) software to deliver smoother flow into new fully machined, big bore venturi. Other features include all-aluminum construction, 12-hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand-adjustable) curb idle screws. Each calibration has been dyno-tested to deliver proven performance! Additional features include: * Gray anodized finish with black anodized billet aluminum metering block and booster inserts * Fully machined from venturi throat to throttle bore for predictable and repeatable performance * Metering blocks feature true gasket sealing and fully adjustable emulsion bleeds, power valve channel restrictors, and idle feed restrictors * Dual 50cc accelerator pumps provide the perfect amount of fuel from idle to full throttle * Clear sight windows on both sides of bowls for easy and safe fuel level adjustments * Built-in drain plug in front center of bowl provides easy access to empty contents of bowl * O-ringed inlet threads offer a large variety of plumbing options and can be plumbed from either side * Factory-ready TPS mounting points for use with data acquisition systems (Holley TPS part number 534-214 available) * Contoured hex head squirter screws for streamlined airflow * Fully adjustable stainless steel external linkage can be adjusted for 1:1 progressive or soft progressive throttle activation (no linkage parts under the carburetor) * J-style vent tubes * 100 percent wet-flow tested by Holley technicians to assure it arrives ready to run
Not Yet Reviewed
$1,999.95
FiTech Ultimate LS EFI 500 hp fuel injection systems with Force Fuel combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 500 hp systems, including a 92mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. Force Fuel sump kits use your stock low-pressure manual or EFI pump to feed their sump tank. The pump is submerged in fuel for cooler and quieter running, and delivers 58 psi of high-pressure fuel to the throttle body at a rate of up to 340 lph (89 gph). For excellent performance and overall ease of operation, buy FiTech Ultimate LS EFI 500 HP fuel injection systems with Force Fuel sump system. Additional Force Fuel sump system features: * Low fuel level in the fuel tank will not result in pump starvation when vehicle is on a steep incline * Generally mounted in the engine compartment, but can be attached to the vehicle's chassis. * Supplied high-pressure hose includes 5 ft. of high-quality EFI -06 fuel line and fittings for plumbing from the Fuel Command Center 2.0 to the EFI throttle body Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 inches of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket
Not Yet Reviewed
$2,171.99
When it comes to fuel injection versus carburetors, new school is just too cool. FiTech Go EFI 4 600 hp self-tuning fuel injection systems have the ECU mounted on the throttle body for greater self-containment, clean installation, and easy setup. These trick systems fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 600 hp. They feature a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it—and the ability to change air/fuel ratios and ignition timing on the fly. Each system has a hand-held controller with a touch screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. FiTech Go EFI 4 600 hp self-tuning fuel injection systems leave the guesswork behind. Order the model with options best-suited for your application. Additional features: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Adjustable fan control switch * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors * Wet Flow swirl spray annual discharge obtains complete atomization * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor * Designed for applications making at least 6 in. of vacuum at idle
( 257 )
$1,587.99
Attention Restricted Nitrous Class racers: Nitrous Express RNC nitrous plate systems maximize the amount of pure, liquid nitrous delivered through a limited jet size. NX conventional RNC systems feature CNC-machined large orifice center bar billet nitrous plates that have only one nitrous jet and one fuel jet. RNC conventional systems are available with or without nitrous bottle. Nitrous Express RNC nitrous plate systems include: * 8 AN feedline * 6 AN to 4 AN custom line from the N2O solenoid to the plate * .178 in. nitrous solenoid * .310 in. fuel solenoid * Solenoid mounting plate * Heavy-duty relay and harness * WOT activation switch * Master arming switch * Stainless steel brackets included with bottle systems * Jetting from 300 to 650 hp * Every nut, bolt, and electrical connector needed to complete the installation
Not Yet Reviewed
$1,530.26
What's the buzz word in motorsports? It's nitrous! So, if you like to go fast—get on board with Nitrous Outlet 4500 GENIII Dual-Stage Hornet plate systems! The CNC-machined billet aluminum Hornet plates are equipped with a unique, large, cone shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat. Each stinger has 16 discharge ports, 8 for nitrous and 8 for fuel. The 16 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution and precise atomization. GENIII dual-stage systems include Y-fittings to connect both stages and jetting for horsepower settings from 100 to up to 800 hp (depending on kit), as well as the nitrous and fuel solenoids capable of flowing up to 800+ hp. Nitrous Outlet offers these nitrous systems with or without nitrous bottles/brackets. Features include: * Revolutionary GENIII design * Dual-entry * Extended reach cone * Fits single-plane 4500 flange intake manifolds—carbureted or EFI * 360 degree discharge pattern * Unmatched atomization precision * Anodized billet aluminum plate * Hard lines, bracket, gasket, jetting, hardware, and electrical included * E85 compatible (with different jetting) * Nitrous bottle size options available Notes: * Gen III Hornet plates are a directional plate design and must be installed with the fuel solenoid towards the front and the nitrous solenoid to back of the vehicle. Failure to do so will result in poor nitrous/fuel distribution and could result in engine damage. * Check clearance for distributor and throttle cable linkage.
Not Yet Reviewed
$2,078.99
—
$2,225.99
Nitrous Outlet 4150 Race dual entry Hornet plate conversion kits come out of the box with everything you need to spray up to 700 hp and are capable of flowing up to 880 hp with additional jetting. These conversion kits have two inlets for nitrous and fuel, allowing you to spray either a huge shot of nitrous or to have two stages. They feature a large, unique cone-shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat, and 15 discharge ports for nitrous and 15 discharge ports for fuel. Their 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4150 Race dual entry Hornet plate conversion kits are CNC-machined from 6061 billet aluminum, have a black anodized body and red anodized stinger, and are CNC-engraved with the Nitrous Outlet logo. Overview: * 880 hp max flow * Dual entry * 4150 flange * 360 degree discharge pattern * Anodized billet aluminum plate * Hardlines, bracket, gasket, jetting, and hardware included * E85 compatible with different jetting * Jetting included for 100-700 hp
Not Yet Reviewed
$1,609.99
Nitrous Outlet 4500 dual entry Hornet plate conversion kits come right out of the box with everything you need to replace your old plate and are capable of spraying 800 hp. The Hornet is designed with the same great technology as the Stinger, with a larger conical cone and dual entry. Each Hornet has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4500 dual entry Hornet plate conversion kits are CNC-machined from 6061 billet aluminum, have a black anodized body, red anodized stinger, and are CNC-engraved with the Nitrous Outlet logo. Overview: * 700 hp max flow * Dual entry * 4500 flange * 360 degree discharge pattern * Anodized billet aluminum plate * Gasket, jetting, and hardware included * Jetting included for 100-700 hp
Not Yet Reviewed
$1,563.99
Turbosmart TS-1 Performance turbochargers are smaller, lighter, and faster. They were developed to leverage modern materials, design, and manufacturing techniques to create a turbocharger range that meets the demands of both Motorsport and performance enthusiasts alike. Turbosmart TS-1 Series are oil cooled turbochargers with lightweight stainless steel investment cast turbine housings, along with a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know from Turbosmart. The ultra-low rotating mass of their unique bearing and shaft assembly is matched to aggressive compressor aerodynamics, ensuring high levels of performance at lower shaft speeds which is mated with a unique T14 Inconel turbine wheel to ensure power at high loads and flow is maintained. The TS-1 turbocharger Series has taken a "whole engine" approach to increasing performance, aiming to achieve power through reduced back pressure and high performance turbines. They are available in V-band and various T4 flange options, reverse rotation, and various ARs. Choose the one that meets your desire for power. Features: * Unparalleled transient response * Aggressive aerodynamics with 7+7 splitter wheels * Lightweight 310s stainless steel investment cast turbine housings * Lightweight aluminum compressor covers * CFD driven designed housings for optimal ARs and flow * T14 Inconel turbine wheel for extreme EGT's * VSR speed balanced * Proprietary dual ceramic bearing system * Integrated iron backplate on center housing
Not Yet Reviewed
$1,914.95
Stromberg BIG97 carburetors feature 55 percent increased airflow to put out a whopping 250 cfm! They have the same standard 97 outside shape, but use enlarged 1.175 in. venturi with a super-efficient 20 degree entry angle. The accelerator pump discharge jets are smaller, and flared exit cones build power by slowing down the mixture to reduce turbulence into the manifold plenum. The result is 250 cfm. Stromberg BIG97 Tri-Power carburetors feature: * Signature 97 outside shape and styling * Cast iron base * Reinforced airhorn * Early plenum effect: allows all cylinders to draw from both barrels, giving you dual-plane drivability with a single-plane style top-end horsepower * New power valve circuits improve fuel conditioning: feeds top-end enrichment directly into the emulsion tubes * Ported distributor vacuum: switch in the brass plug (included) and connect your distributor to improve combustion efficiency in cruising mode; you'll run smoother and cooler, with more torque and better fuel mileage * Big S-jet twin-ball inlet valve: accepts 5/16 in. hard line and standard Stromberg fuel fittings * Four finishes available: original equipment style, chrome, chrome/black, or barn find (patina)
( 2 )
$1,560.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
