Availability
Showing In Stock Items. Show All 15 Items.
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$1,049.00
—
$1,099.00
Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.
( 2 )
$1,003.70
—
$1,439.20
On Sale
If you are adding nitrous or boost to your 2010-2015 Camaro race car, Holley has the fuel pump upgrades for you, like these dual in-tank pumps. The fuel pump module design starts with a billet pump flange assembly and connects it to dual 340 or 450 LPH fuel pumps for maximum fuel delivery. The module also includes two HydraMats to eliminate fuel starvation under hard acceleration or cornering. The integrated jet pump assembly allows retention of factory drivers side fuel pickup. A new level sensor is included and pre-installed. Installation is as simple as removing factory module and replacing with Holley module. Select the dual in-tank pump model that's designed for your application. Features and benefits: * Machined, billet, anodized, laser-etch components for durability and good looks * -8AN ORB inlets and outlets (return fitting included) * Two HydraMats, one for each pump * Integrated jet pump assembly allows retention of factory drivers side fuel pickup * Have been tested to deliver stable fuel pressure down to low fuel indicator warning light * Brand new level sensor included and pre-installed to make installation as simple as removing factory module and replacing with Holley module * Outlet fitting included to connect to factory feed line * Secondary ORB port machined into flange for easy AN plumbing of feed line * Module is return-style only so a regulator must be installed
Not Yet Reviewed
$1,249.95
$1,123.95
Fleece Performance CP3K fuel pump kits are a valuable lesson in supply and demand. Simply put; your diesel engine's demand for more fuel cannot be supplied by your stock CP3 pump, thus its' time for a new supplier--CP3K. These modified pumps are engineered to eliminate the factory fuel flow restriction that usually begins at 3,000 rpm. Your stock pump at this point starts losing fuel flow and rail pressure, which equates to loss of horsepower when you need it most. Reverse the trend; maintain the desired fuel rail pressure through your entire rpm range with cost-effective Fleece CP3K fuel pumps.
Not Yet Reviewed
$1,299.00
—
$1,349.00
Are you tired of multi-pump fuel upgrades that require a bunch of T-fittings, unreliable hoses and hose clamps? Snow Performance offers you a solution with their multi-pump fuel hats that feature a billet aluminum manifold with CNC-machined passages, making them the nicest high-output fuel pump upgrade on the market! This design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. No detail has been overlooked with these assemblies. The CNC-machined bodies hold the fuel pumps securely and feature Viton® chemical-resistant O-rings to ensure a perfect leak-free fit. The billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels. Snow Performance fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory. To meet your specific vehicle's fuel demands, these assemblies are configurable with a combination of two or three fuel pumps. Select the universal multi-pump fuel hats designed for your application needs. Key features: * Fuel hats are engineered, CNC-machined and built from 6061 billet aluminum * CNC-machined body holds the fuel pump(s) securely and feature Viton chemical-resistant O-rings to ensure a perfect leak-free fit * Billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels * Fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory * Design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. * No detail has been overlooked with these assemblies * Fuel hats feature female AN ORB feed and AN ORB return ports * Fittings are sold separately to adapt to your desired combination of 10AN, 8AN, or 6AN lines Pump configurations are shown below to help assist with your selection: -- 2 Pump Streetable configuration (one 450lph pump and one 470lph pump)—this configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline -- 3 Pump Streetable configuration (one 450lph pump and Two 470lph pumps)—this configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline and draws 10-12 percent less current than the "Race" 3 pump version -- 3 Pump Race configuration (three 470lph pumps—this configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline and is designed for max/effort/flow
Not Yet Reviewed
$1,195.43
Aeromotive A1000 Corvette Stealth kits provide fueling for standard or high-horsepower applications. No matter what add-ons you've given your late C5 or C6, the quiet, cool operation of these fuel systems have you covered! Corvette Stealth kits feature a single A1000 fuel pump capable of supporting big horsepower; it slides into your factory tank and utilizes the factory jet siphon system—1000 hp on forced induction and 1300 hp on naturally aspirated. No more drilling, no more multiple pumps to risk failure, no more surge tanks, no more mess. Aeromotive "in tank" systems offer a serious reduction in installation time and investment, too. Simply hook up your two wires, feed the line, and you're done! How many fuel pumps does your Corvette need? Just one! Whether carbureted or EFI, supercharged or turbocharged, Aeromotive A1000 Corvette Stealth kits are a truly clever fit.
( 1 )
$1,037.10
Two is better than one. The single stock CP3 pump runs out of fuel well before peak power is produced. The solution is to install one of these Pacific Performance Engineering dual fueler CP3 injection pump kits. The dual fueler pump and factory pump work in conjunction, each delivering half of the total fuel volume requested by the engine computer. In the event of one pump failing, the electronic controller will automatically switch all fuel delivery responsibilities to the remaining operational pump. The kits will not produce more fuel pressure than the engine ECU requests; they will only increase fuel volume as needed to maintain ECU-requested fuel pressure. For racing applications, the Pacific Performance Engineering dual fueler CP3 injection pump kits can provide fuel flow to maintain fuel pressure to 26,000+ psi. They are essential for highly modified race engines that are seeking to produce up to 2,000+ hp.
( 1 )
$1,259.99
Fleece Performance offers Bosch CP3 fuel pumps for a wide range of vehicles—including many Chevrolet and GMC diesel trucks. These are drop-in replacements for your stock injection pump and each pump includes a new snout O-ring. There are many signs that a factory fuel pump is failing; and replacing the part is essential, as it conveys the required quantity of fuel from the tank to the engine at the necessary pressure. Order the CP3 fuel pump recommended for your application.
Not Yet Reviewed
$1,279.00
Aeromotive A1000 Mustang stealth kits feature a single A1000 fuel pump capable of supporting big horsepower. They're designed to drop right into your factory gas tank. The kits incorporate the factory jet siphon system and include an integral 100 micron pre-pump filter and an ORB-08AN return line port. Now, you can plumb a true return-style system into your Mustang to support the power you're making. Aeromotive A1000 Mustang Stealth kits utilize the factory tank, O-ring, lock ring, and mounting location. Order the kit recommended for your application.
Not Yet Reviewed
$1,137.90
These Aeromotive Eliminator Mustang stealth kits feature a single Eliminator fuel pump capable of supporting big horsepower. They are designed to drop right into your factory gas tank. The kits incorporate the factory jet siphon system and include an integral 100 micron pre-pump filter and an ORB-08AN return line port. Now, you can plumb a true return-style system into your Mustang to support the power you're making. The Aeromotive A1000 Mustang Stealth kits utilize the factory tank, O-ring, lock ring, and mounting location.
( 2 )
$1,361.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
