Availability
Showing In Stock Items. Show All 15 Items.
On Sale
If you are adding nitrous or boost to your 2010-2015 Camaro race car, Holley has the fuel pump upgrades for you, like these dual in-tank pumps. The fuel pump module design starts with a billet pump flange assembly and connects it to dual 340 or 450 LPH fuel pumps for maximum fuel delivery. The module also includes two HydraMats to eliminate fuel starvation under hard acceleration or cornering. The integrated jet pump assembly allows retention of factory drivers side fuel pickup. A new level sensor is included and pre-installed. Installation is as simple as removing factory module and replacing with Holley module. Select the dual in-tank pump model that's designed for your application. Features and benefits: * Machined, billet, anodized, laser-etch components for durability and good looks * -8AN ORB inlets and outlets (return fitting included) * Two HydraMats, one for each pump * Integrated jet pump assembly allows retention of factory drivers side fuel pickup * Have been tested to deliver stable fuel pressure down to low fuel indicator warning light * Brand new level sensor included and pre-installed to make installation as simple as removing factory module and replacing with Holley module * Outlet fitting included to connect to factory feed line * Secondary ORB port machined into flange for easy AN plumbing of feed line * Module is return-style only so a regulator must be installed
Not Yet Reviewed
$1,249.95
$1,123.95
On Sale
Summit Bucks
FUELAB high-efficiency EFI inline twin screw fuel pumps are available in a variety of flow rates, ranging from 79 gph (300 lph) to 291 gph (1,100 lph); and horsepower ratings from 650 to 2,800 hp. These electric external street/strip pumps are black anodized for beauty and protection from rust and corrosion. They're offered in universal and remote mount options.
Not Yet Reviewed
$1,499.00
$1,349.10
On Sale
Holley VR Series billet fuel pumps feature brushless pump technology and a twin-screw rotor design. These in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. They are designed to work on high-boosted race cars, endurance cars, and daily drivers. VR pumps will work with gasoline, methanol, and E-85 (compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event). The VR1 and VR2 models are capable of a consistent 130 psi, can be fully submerged in the fuel cell or chassis mounted, and feature race-worthy billet aluminum construction for lasting durability and looks. Whether running 300 or 3,000 hp, Holley has a brushless pump for you. Features include: * Pumps can be run in one of two different speeds * Low speed control for low fuel consumption requirements * Full speed for high fuel consumption requirements * Proven for 18.5 V compatibility * Provide sufficient fuel flow for forced induction applications * Built for continuous duty if required * Dual-pump models are designed for endurance racing—use both or one can be a reserve pump * AN O-ring inlet/outlet * High flow and high pressure with low amperage draw * Maximum amp draw of 19 amps for VR1 and 38 amps for VR2 pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.
( 1 )
$1,599.95
$1,438.95
On Sale
Summit Bucks
FUELAB in-tank twin screw brushless fuel pump kits are available for a variety of flow rates, ranging from 79 gph (300 lph) to 291 gph (1,100 lph); and horsepower ratings from 650 to 2,800 hp. The pumps are black anodized for protection and long-lasting performance—and include a 65 micron straining filter. These aftermarket replacements offer an array of features: --- Pump features: * Compatible with gasoline, diesel, methanol, and ethanol * Twin screw rotor pumping mechanism * 125 psi max operating pressure * 650 to 2,800 hp power support (depending on model) at continuous speed (pump gas, naturally aspirated) * Higher efficiency means less current draw and less noise * Superior priming capabilities * Greater resistance to cavitation (vapor lock) --- Motor features: * Lightweight super-efficient DC brushless motor to minimize current draw * Powerful high flux density Neodymium rare earth magnets * No motor brushes to wear out or corrode (low-sulfur diesel, no problem) * Wet motor design, no dynamic shaft seals that can wear out --- Controller features: * 12 to 16 V vehicle electrical system compatibility * Pump controller included for full speed, PWM (or 0-5 V input speed control, some models) * Continuous duty motor speed --- Construction features: * Compact, lightweight design, less than 3 lbs. * Billet aluminum construction with anodize per MIL-A-8625, Type II * Long life, multi-fuel compatible fluorosilicone static seals * Accepts standard or port style -8 AN fittings --- Pulse Width Modulation compatibility (PWM) * Compatible with most aftermarket ECU's with PWM output frequency * Compatible from 100Hz to 5000Hz * AEM * ECU Masters * Fueltech * Haltech * Holley * Link Engine Management * Megasquirt
Not Yet Reviewed
$1,499.00
$1,349.10
On Sale
Holley VR1 Series fuel pumps allow you to build your own fuel system tailored to your combination. Featuring brushless pump technology and a twin-screw rotor design, the VR1 fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. The pumps include a 2-step controller for pump speed control and can be ran in one of two different speeds: low speed control for low fuel consumption or full speed for high fuel consumption requirements. Order the Holley VR1 Series brushless fuel pump with controller best suited for your application and build your own winning setup! Product features: * Designed to work with gasoline, methanol, and E-85 (compatible for methanol and E85 for competitive drag race use only—must drain and flush after each race event) * Can maintain up to 335 gph flow at 13.8 V * Capable of 130 psi while providing significant flow for forced induction applications where belt driven pumps are normally used * Unlike other pumps, the VR Series are built for continuous duty if needed * Quality construction for durability and good looks * Can be fully submerged in fuel cell or chassis mounted * Maximum amp draw of the VR1 is 19 amps
Not Yet Reviewed
$1,249.95
$1,123.95
On Sale
Summit Bucks
FUELAB PRO Series extreme flow spur gear fuel pumps are compatible with gasoline, diesel, ethanol and methanol. Each pump features a high-precision spur gear pumping mechanism and a lightweight super-efficient DC brushless motor that reduces current draw, while the low mass rotor provides high-speed reaction to changes in speed and flow. FUELAB PRO Series fuel pumps have powerful high-flux Neodymium rare earth magnets, meaning there are no motor brushes to wear or corrode, and the wet motor design has no dynamic shaft seals that can wear out. These compact, powerful, and lightweight pumps feature billet aluminum construction with a durable anodize finish, Type II high-quality T-style mounting brackets, and long-life multi-fuel compatible Fluorosilicone static seals. Available in different flow rates, select the FUELAB PRO fuel pump desired for your system.
Not Yet Reviewed
$1,549.00
$1,394.10
On Sale
FUELAB Gold fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$1,175.00
$1,057.50
On Sale
APR high-pressure fuel pumps dramatically increase the maximum volume of fuel the HPFP can deliver. In doing so, the direct-injection fueling system is capable of satisfying fueling requirements set forth by high-horsepower setups. This is accomplished by increasing the displacement of the pump using high-quality components to exacting tolerances.
Not Yet Reviewed
$1,399.95
$1,258.95
On Sale
Holley Fuel Cell EFI pump module/VR Series brushless fuel pump assemblies are engineered to give you VR fuel pump power inside your cell. Designed as direct drop-in replacements for your existing 6-, 10-, or 12-bolt flange fuel cell cap assemblies, they're made to work on high-boosted race cars, as well as your daily driven weekend endurance car. Built for continuous duty if needed, The VR Series of pumps include 2-step controllers for precise low or full speed pump control and harnesses. Holley Fuel Cell EFI pump module kits include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Features: * Billet top flange includes a -8 AN inlet port, a -10 AN outlet port, and a fuel filler cap * Fuel pump depth is fully adjustable from 7.5 in. to 11 in. deep * Capable of 130 psi, while providing significant flow for forced induction applications where belt-driven pumps are normally used * Billet aluminum construction for durability and good looks * High-flow and high-pressure with low-amperage draw * Can be fully submerged in the fuel cell or chassis mounted * Maximum amp draw of 38 amps for the VR Series * Single VR1 brushless fuel pump includes one 2-step controller and harness * Dual VR2 brushless fuel pumps include two 2-step controllers to control pumps independently of each other and harnesses * Can be used as an upgrade for carbureted systems with the proper regulator
Not Yet Reviewed
$1,549.95
$1,393.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
