Availability
Aeromotive universal bypass fuel pressure regulators are dual purpose—for use with fuel systems in street or track applications. They feature adjustable base pressure and are ideal for vehicles/systems where superior flow and pressure control are desired. The regulators are available in different styles and pressure ranges, and for fuels such as gasoline, diesel, and flex.
( 178 )
$162.25
—
$252.00
Help your fuel injection system keep up on measured pressures with these Holley replacement pressure transducers. They include a wiring pigtail, are available for all Holley EFI fuel injection systems, and come in different pressure ranges to suit your engine application requirements.
( 48 )
$149.95
—
$212.95
Summit Bucks
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 312 )
$227.95
Tanks Inc. GPA Series fuel pumps are designed to be used in many die-stamped, alloy-coated, and stainless steel gas tanks which have factory-installed reservoir trays. The tray is an absolute necessity for fuel injection in order to prevent fuel starvation when accelerating and cornering. These pumps are available in four different operating ranges in order to supply up to 1,000 hp. An internal wiring harness, supply line, return line, filter sock, and insulator sleeve are included. The heavy 10-gauge, no-warp mounting plate contains fittings for the supply, the return, the vent, and the electrical connector.
( 73 )
$214.99
—
$249.99
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 48 )
$257.99
$109.99
—
$242.99
These Red electric fuel pumps from Holley feature an improved design for street and strip applications, and a tumble-polished billet look with the distinctive red logo. These pumps have a 97 gph flow rate, draw only 2 amps, and have a maximum pressure of 7 psi with an externally accessible pressure relief valve. They weigh only 2.88 lbs., and include a mounting bracket.
( 279 )
$199.95
Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions, however, of many pumps are compact enough to fit existing hanger assemblies, without modification. All pumping components have been validated to OEM specifications for use in E85/flex fuel applications. Most Walbro in-tank fuel pumps utilize a proven gerotor design. Some high-performance models, including those designed for engines with more than 750 hp, feature a dual-channel turbine design for maximum efficiency in high-pressure and high-temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's higher than conventional pumps. Some pumps require modifications to system wiring, fuel lines, and the fuel module, and should be professionally installed. Installation kits including a fuel strainer, fuel hose, harness pigtail, clamps, and wire connectors are sold separately.
( 370 )
$101.99
—
$271.99
Summit Racing™ mechanical wastegates are constructed of cast stainless steel and 6061 aluminum with a black anodized finish. These valves control the flow of exhaust gases to the turbine wheel in a turbocharged engine system. Their primary function is to regulate the maximum boost pressure in turbocharger systems, to protect the engine and the turbocharger. Order the relief diameter preferred for your application.
( 28 )
$100.99
—
$179.99
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.
( 420 )
$177.95
—
$227.95
Carter universal rotary vane electric fuel pumps operate using leaded and unleaded gasoline, gasohol, and fuel boosters. They have an internal pressure-regulating valve, and feature free-flow fuel delivery. These pumps have no points to burn out, and no shaft seals to leak or deteriorate.
( 587 )
$102.99
—
$234.99
AEM Electronics high-flow external electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable service and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a pre-filter, hose, clamps, and flying lead. Select the model with the size, psi limit, and flow rate needed for your application.
( 34 )
$189.95
Aeromotive Stealth electric fuel pumps provide your ride with the fuel it needs to own the road or the track. They feature a compact, lightweight design that will bolt into most existing hanger assemblies, making them an easy upgrade to your fuel system. These versatile components utilize a turbine pumping mechanism that increases durability and allows use in most pulse-modulated applications. Don't settle for lesser fuel pumps; feed your engine with the Aeromotive's Stealth fuel pumps best suited for your application!
( 183 )
$139.99
—
$240.79
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 49 )
$340.99
$180.99
—
$275.99
On Sale
Blue electric fuel pumps from Holley feature an improved design for street and strip applications, a new lower housing casting for enhanced fuel flow, and a tumble-polished billet look with the distinctive blue logo. These pumps have a 110 gph flow rate, draw only 3 amps, and have a maximum pressure of 14 psi. They weigh only 3 lbs., and include a mounting bracket.
( 303 )
$239.95
$179.95
—
$226.95
Bosch Motorsport electronic throttle bodies (ETBs) are designed to control the fresh air delivery of spark ignition engines in combination with an electronic throttle control (ETC) system. ETB applications with flex-fuel, CNG and LPG are permissible if injected in the air flow after the throttle body. A typical ETC system includes the following components: electronic throttle body, accelerator pedal module, and electronic control unit. Additional features of Bosch Motorsport electronic throttle bodies include: * Many bore diameters available * Opening direction: most are counterclockwise; select ETBs are clockwise * Two redundant sensors control the throttle position * All ETBs have an idle air position * Temperature range: -40 to 284 degrees F (-40 to 140 degrees C) * ETBs can be connected directly to control units with ETC functionality * Supply voltage: 6 to 16 V * Supply voltage sensor: 5 ± 0.2 V * Output signal I: 0 to 5 V for 0 to 90 degrees * Output signal II: 5 to 0 V for 0 to 90 degrees
( 22 )
$110.99
—
$176.99
Our Summit Racing™ fuel pump and regulator kits feature your choice of 105 gph or 140 gph free flow at a maximum fuel pressure of 14 psi, drawing 4 amps. The pump and regulator feature 3/8 in. NPT ports and include mounting brackets. Not compatible with alcohol fuels.
( 75 )
$133.99
—
$175.98
Holley 100 gph in-line electric fuel pumps are designed for high-output naturally aspirated and forced induction EFI and carbureted vehicles. They support up to 900 EFI or 1,050 carbureted horsepower, and is compatible with pump gas, race gas, diesel, or E85. The pumps utilize inlet and outlet connections that make installation easy on new applications and quick replacement of existing competitor fuel pumps. Holley universal 100 gph in-line electric fuel pumps include a male -6 to -8 AN discharge fitting with integral high-pressure check valve, terminal nuts, terminal boots, and installation instructions. Additional features and specs: * Roller vane design provides fuel pressure and volume to support up to 900 EFI N/A or 700 EFI boosted horsepower * Compatible with Flex Fuel (E85/E90) and all types of gasoline (100 percent alcohol fuels may diminish fuel pump life) * Inlet thread is -10 AN female ORB (O-ring port fitting) and discharge is a female -6 AN ORB
( 24 )
$217.95
Aeromotive A1000 Gen-II EFI fuel pressure regulators feature excellent control, superb durability, and a high-flow design suited for medium to high-horsepower powerplants. These units have been downsized and lightened up, and yet remain as incredible as ever. They're compatible with alcohol or gasoline, have a 1/8 in. NPT gauge port, and are available in either -6, -8, or -10 AN inlets with a -6 return. Keep your vehicle's engine roaring with Aeromotive A1000 Gen-II EFI fuel pressure regulators.
( 5 )
$222.99
—
$271.05
Stealth 340 pumps are high-output, in-tank, electric fuel pumps for fuel injected and carbureted applications. At a volume rate of 340 liters per hour. These universal pumps bolt into many existing hanger assemblies, and are a direct fit upgrade for many OE applications. These pump will support up to: * 1000 HP (carbureted/naturally aspirated) * 850HP (carbureted/forced induction) * 850HP (EFI/naturally aspirated) * 700HP (EFI/forced induction) * 700HP on E85 (carbureted/naturally aspirated) * 595HP on E85 (carbureted/forced induction) * 595HP on E85 (EFI/naturally aspirated) * 490HP on E85 (EFI/forced induction)
( 16 )
$142.99
Summit Racing™ billet throttle bodies are designed with larger openings (92mm or 102mm) to improve throttle response and provide maximum airflow. They're precision CNC-machined from billet aluminum and available in your choice of natural or black anodized finishes. Feed your LS engine the air it needs—and unleash its hidden horsepower! Order the Summit Racing™ replacement throttle body recommended for your vehicle.
( 24 )
$169.99
—
$180.99
Auto Metal Direct Spectra Steel OE replacement fuel tanks are part of the most extensive coverage in the aftermarket and are crafted from corrosion-resistant steel that is plated inside and out. Their strong, electrically welded seams are reinforced, and each tank is pressure-tested for leaks. Tank straps and sending units are sold separately. Features include: * Exact fit for easy installation * 100 percent factory-tested * OEM-approved ni-terne steel * Precision-engineered and tooled to meet or exceed OE specifications * Validated for fit, form, and function * Manufactured under ISO 9001-TS 16949 quality system * Transit-tested packaging * 3-year limited warranty * For use with gasoline containing up to 20 percent ethanol (E20) and diesel containing up to 5 percent biodiesel (B5)
( 136 )
$104.99
—
$249.99
BD Diesel Killer grid heater upgrade kits are purpose-built to address a major flaw in the 6.7L Cummins engine--the electrical connection to the intake grid heater. When powering the grid heater, 200 amps pass through a small bolt and nut inside the intake and over time is known to deteriorate and eventually arc and break off. The nut drops into the engine, leading to extensive damage to the piston, head, and valves. BD's Killer kits upgrade that flawed electrical circuit by eliminating the problematic bolt and nut inside the intake while retaining stock functionality of the heater. The kits are cost-effective and easy to install. Additional features: * Allows for full heat output with the stock intake grid heater * Fully emissions compliant * No modifications or tuning required * Self-locking threads built into the lower busbar prevent backing out and compromising electrical connection * Kit includes replacement hardware and gaskets, along with special tools required for the job
( 3 )
$206.95
Aeromotive offers compact EFI regulators for applications producing up to 1,000 hp, where space is at a premium. Their compact design fits small engine compartments while providing big performance. They ideally work with EFI systems where only one inlet is needed.
( 24 )
$201.55
Summit Bucks
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 566 )
$216.95
—
$270.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
