Availability
On Sale
Nitrous Outlet is excited to release its new WinMax dual-channel window switches for nitrous activation. The WinMax is a user-friendly device that's easy to read and program. The detailed instructions will walk you through all of the options such as RPM, TPS, gear lockout, shift light, and single or dual-stage configuration. WinMax incorporates everything you love about Nitrous Outlet products. Additional features of WinMax dual-channel window switches: * Live RPM and TPS displays * Two timing retard outputs * Single or dual-stage control * Bright backlit LCD display * Multiple gear lockouts * Stage 1 and Stage 2 activation LED indicator * Built-in bright LED shift light * Works with any 4-cycle engine (with 1 to 12 cylinders) * Perfect for a Drive-by-Wire vehicle * TPS activation and deactivation * RPM activation and deactivation * Works with a wide-open throttle switch
( 8 )
$283.99
$241.39
Nitrous Express Digi-Set nitrous time delay switches are just what you need to activate a second stage of nitrous oxide. You can also use them to delay your single stage to get the traction best suited to your driving needs. The length of delay is user-settable and can be fine-tuned for best results.
( 1 )
$206.71
Clearance
Dorman EGR vacuum switching valves are designed to inhibit EGR operation during conditions where it could adversely affect engine performance and vehicle drivability. They can be either normally open or closed and installed in series between the vacuum modulator and EGR valve, or installed on a second port on the EGR valve. Dorman EGR vacuum switching valves control an atmospheric bleed, which inhibits EGR operation any time a given set of ECM parameters is met.
( 2 )
$100.99
On Sale
Holley dual tank fuel pump kits will allow you to pick up additional fuel in the tank. They include an in-tank fuel pump, relay, wiring harness, and fuel filter. The fuel pump kits are available for 1, 2, and 4-barrel Pro-Jection systems.
( 3 )
$145.95
$131.35
These NOS single stage electric pack wiring kits have everything that you need to properly wire an NOS single stage nitrous oxide kit. They include a microswitch and bracket, activation switch, relay, harness, and the necessary connectors for a trouble-free nitrous installation.
Not Yet Reviewed
$105.95
Motion Pro Armor Coat throttle and idle cables feature attractive stainless steel weave casings and protective clear Armor Coat that guards chrome and painted surfaces against damage. These Motion Pro cables also feature premium chrome fittings and PE liners for durability and smoothness. Select the cables designed for your motorcycle.
Not Yet Reviewed
$106.99
—
$114.39
On Sale
Holley Sniper 2 EFI Power Distribution Modules (PDM) are cost-effective and optional accessories that isolate the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. The PDM also distributes power to your EFI fuel pump and a single fan (second fan can be ground triggered through the included input/output harness). Two additional 2-amp circuits can power low-current accessories like gauges or to trigger relays. Battery and a switched 12 V source are all that's required from your vehicle to power the PDM. Product details: * Provides conditioned Power, Ground and Switched connections for ALL components within a Sniper 2 EFI install. (Throttle Body, Fuel Pump, HyperSpark Ignition System, and Optional Fan) * 3 relay channels – 15 amp Powertrain (Sniper throttle body and ignition system) 25 amp - Fuel pump output – 25 amp fan output * LED status indicators, show you which channel is triggered at a glance * Removable cover for easy accessibility, with wiring diagram built into the lid, like a fuel panel
( 7 )
$189.95
$170.95
On Sale
These Holley Sniper 2 EFI PDM main harnesses includes the switched 12V power wire, main battery power and ground, coil input wire, and HyperSpark distributor connector. They feature a braided split wire loom to keep the wires protected and your engine bay clean! They are intended to be used on applications with a PDM, and do not include a fuel pump relay. Holley Sniper 2 EFI PDM main harnesses include: * One 5 ft. 12 gauge main battery power wire * One 5 ft. 12 gauge main battery ground wire * One 30 amp fuse * One 20 ft. 20 gauge fuel pump trigger wire * One 3 ft. 20 gauge coil input wire * One 5 ft. 20 gauge switch 12V ignition wire
( 3 )
$145.95
$131.35
On Sale
Maintain optimal bottle pressure with Nitrous Outlet X-Series nitrous bottle heater kits. These high-temperature silicone wraps warm your 5, 10, or 15 lb. bottles efficiently to keep the inputted bottle pressure concise. And that means a better performing nitrous system with a consistent flow of nitrous, pass after pass. The kits include an adjustable bottle pressure switch that automatically activates the bottle heater as needed. Racing on a budget? Get higher performance at a lower price with the help of Nitrous Outlet X-Series nitrous bottle heater kits.
( 9 )
$193.99
$164.89
On Sale
Holley Sniper EFI main wiring harnesses include the switched 12 V power wire, main battery power and ground, fuel pump relay, coil input wire, and magnetic distributor input wire. These kits also include 6 ft. of 3/8 in. black braided split wire loom to keep the wires clean and protected from abrasion. Includes: * 5 ft. of 12-gauge main battery power wire * 5 ft. of 12-gauge main battery ground wire * 30 amp fuse and cover with mounting tab * 40 amp 5-pole relay with mounting tab * 20 ft. of 12-gauge fuel pump 12 V power wire * 3 ft. of 20-gauge crank signal positive wire * 3 ft. 20-gauge crank signal negative wire * 3 ft. 20-gauge coil input wire * 5 ft. 20-gauge switch 12 V ignition wire
( 1 )
$164.95
$148.45
On Sale
Holley Sniper 2 EFI main wiring harnesses include the switched 12 V power wire, main battery power and ground, fuel pump relay, coil - input wire, and HyperSpark distributor connector. This harness is braided split-wire loom to keep the wires protected and your engine bay clean! Holley Sniper 2 EFI main wiring harnesses feature: * One 5 ft. 12 gauge main battery power wire * One 5 ft. 12 gauge main battery ground wire * One 30 amp fuse with cover with mounting tab for a secure installation * One 40 amp 5-pole relay with mounting tab for a secure installation * One 20 ft. 12 gauge fuel pump 12 V power wire * One 3 ft. 20 gauge coil input wire * One 5 ft. 20 gauge switch 12 V ignition wire
( 1 )
$212.95
$191.65
On Sale
Nitrous Outlet Dual Voltage Wrap Around Bottle Heaters warm the nitrous bottle to maintain optimal pressure, and can be used either with the 110 V wall plug or via the 12 V 14-gauge wires to be wired directly to your Nitrous Outlet switch panel. Bottle pressure is key in a well-performing nitrous system, and helps keep a consistent flow of nitrous—pass after pass. Additional details: * Bottle heaters have been tested, refined, and tested again to assure perfect fitment on 10, 12, and 15 lb. nitrous bottles of all brands * Bottle heater will fit all brand nitrous bottles and is easily installed and removed with one Velcro® wrap. * High-temp silicone * Maintains bottle pressure * 12 V, 300 watts, 21.74 amps
Not Yet Reviewed
$132.99
—
$225.99
$113.04
—
$192.09
On Sale
Holley multi-map selectors are specifically designed for use with Holley Dominator EFI systems. They allow up to four different calibrations to be selected at vehicle key-on. The included switch is connected into the J3 ECU connector. Multiple maps can be used for many different purposes, such as various fuel types or octanes; charting track conditions, nitrous setups, and more.
Not Yet Reviewed
$172.95
$155.65
FuelTech Peak and Hold 8A/2A injector drivers are 4-channel low impedance units designed to keep up with the demands of today's high horsepower engine fuel injectors. The peak and hold circuit opens the injector with a high current (Peak) pulse--and then switches the current down to hold the injector open to feed the volume. Additional details: * Controls up to 4 injectors with impedance below 1.5 ohm * 16 Bosch 160 lbs./h (1600cc) injectors (4 per channel) * 8 Siemens low-impedance injectors (2 per channel) * 4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector) Package includes: * 1 Peak and Hold 8A/2A * 1 operation and installation guide * 1 mounting kit (four rubber mounts, four washers and four 1/4 in. nuts) * 6 ft. Peak and Hold unterminated harness (optional) * 1 FuelTech black carbon fiber sticker
Not Yet Reviewed
$219.00
These Standard Motor Products fuel tank selector valves are designed to connect your fuel lines to the separate tanks and hook up your electric switch. They are manufactured from quality materials and install in the stock location for a direct fit.
( 19 )
$136.99
Dorman fuel tank selector valves are designed to match the original equipment in fit, form and function. Selector valves allow the driver to control which tank is supplying the engine with fuel. Failure to replace a faulty valve will limit the ability to switch between fuel tanks. Dorman's replacement fuel tank selector valves restore the ability to use both fuel tanks; they offer easy installation, an exact performance match, and reliability. Order the model recommended for your truck application.
Not Yet Reviewed
$135.95
On Sale
Pop your bottle for power—from your driver's seat—with Nitrous Outlet remote nitrous bottle openers. These openers are switch activated, feature thumb-twist screws to easily remove the opener if needed, and include all wiring and hardware. They were designed to work with Nitrous Outlet bottles, but are compatible with most other brand bottle valves, as well. Getting out of the driver's seat to open the bottle can be a hassle. Instead, open and close your nitrous bottle with a simple flick of your Nitrous Outlet remote openers.
( 2 )
$304.99
$259.24
FuelTech Peak and Hold 4A/1A injector drivers are 4-channel low impedance units designed to keep up with the demands of today's high horsepower engine fuel injectors. The Peak and Hold circuit opens the injector with a high current (Peak) pulse--and then switches the current down to hold the injector open to feed the volume. Additional details: * Controls up to 4 injectors with 1.5 to 3 ohms of impedance * 8 Bosch 160 lbs./h (1600cc) injectors (2 per channel) * 4 Siemens 83 lbs./h injectors * 4 MSD injectors (with 2 ohms impedance per injector) Contents of package: * 1 Peak and Hold 4A/1A * 1 operation and installation guide * 1 mounting kit (four rubber mounts, four washers and four 1/4 in. nuts) * 6 ft. Peak and Hold unterminated harness (optional) * 1 FuelTech black carbon fiber sticker
( 1 )
$219.00
Get double the adjustment with Turbosmart dual stage boost controllers! You'll have fast boost response and two adjustable boost levels, plus the best bang for your buck in horsepower upgrades! Turbosmart dual stage boost controllers are built for precision and durability from high-grade brass and billet aluminum. They offer a robust design and a detent adjustment system for accurate and simple boost tuning. They also include a Rocket Launcher switch to toggle between high and low boost on the fly! These manual boost controllers are ideal for mildly modified turbocharged engines and are perfect for increasing boost levels on factory turbo cars and engines. Control the boost on two levels with Turbosmart dual stage boost controllers.
( 1 )
$272.95
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$399.95
$259.95
Go Fast Bits SXV blow-off valves are designed to ensure the ultimate reliability, performance, and boost holding. Featuring a 25mm inlet and outlet, the SXV is the perfect valve to replace the plastic OEM bypass/diverter valve or integrate into a turbo system that didn't previously have a valve. Plastic hose-mounted OEM bypass valves are very common, as are the reliability issues they suffer from cracked plastic and diaphragm failures that result in significant boost loss and poor performance. A significantly leaking OEM valve can also accelerate wear or even damage the turbo from over speeding. These SXV blow-off valves utilizes an uncompromising approach to their design and materials to ensure all your hard-earned boost gets to the engine, so the turbo doesn't work harder than it needs to. Deliver your turbos' full potential with the use of these SXV blow-off valves featured from Go Fast Bits! Product Overview: * Precision CNC-machined components for rugged reliability * Viton piston seal for the ultimate boost holding * The operation of the SXV is designed to offer the best possible throttle * An OEM bypass/diverter valve is open until it needs to close—increases turbo lag * An SXV is closed until it needs to open—minimizes turbo lag * By venting only, when necessary, the SXV eliminates the additional lag imposed by the OEM valve, resulting in the best throttle response your turbo system is capable of delivering. * Switch out your OEM valve for an SXV for the ultimate reliability and throttle response, with the peace of mind of Go Fast Bits lifetime warranty!
Not Yet Reviewed
$171.00
Fleece Performance Ford fuel heaters include the fuel heater and chassis harness to provide switched power to the heating element. The kits are specifically for use in Fleece Performance heated fuel filter kits installed on 2011-16 Ford 6.7L Powerstroke. Fuel heater specifications: * Temperature switching points: -- ON: 28.4 degrees F +/- 5.4 degrees -- OFF: 48.2 degrees F +/- 5.4 degrees * At typical fuel flow rates a temperature increase of between 4 to 8 degrees F will occur across the heating element
Not Yet Reviewed
$189.00
Summit Racing™ EFI fuel cells will help make switching to fuel injection painless. These cells are made from 5052 lightweight aircraft aluminum and TIG-welded for strength and durability. They're available in a variety of sizes and fuel capacities. Models are available with or without sending units and fuel pumps. These cells are designed to work with Summit Racing™ or Tanks Inc. retrofit in-tank fuel pumps.
( 2 )
$289.99
Nitrous Express remote nitrous bottle valve openers save you a trip to your trunk! Are you still getting out of your car to open your nitrous bottle? Or, maybe you already have a remote setup, but need a new motor? These Nitrous Express remote nitrous bottle valve openers offer just the motor to keep you inside of your car. Flip the switch (not included), and you're ready to blast off!
( 1 )
$151.06
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
