Availability
Multi-port EFI systems require a stable fuel supply to maintain the best performance throughout the engine's rpm range. MSD high-pressure, high-flow fuel pumps feature a roller vane pump mechanism, which is extremely resistant to clogging and jamming. The pumps mount in-line (out of the tank) with two supplied cushioned clamps for a quick and sturdy installation. The wire terminals feature brass studs for secure connections. These MSD pumps are ideal as "boosters" for nitrous oxide applications, or as stand-alone pumps for multi-port EFI systems on engines up to approximately 500 hp.
( 50 )
$162.95
VS Racing wastegates reduce the risk of blowing your turbocharged engine by controlling the exhaust gases going through the external wastegate turbo system. This helps maintain proper boost pressure on your street and race vehicles. Relieve excess pressure from your turbocharged powerplant with VS Racing wastegates, available in multiple relief diameters. Features, parts, and specs may include: * Black anodized aluminum cap * Cast stainless steel base * Inlet and outlet flanges * Clamps * Various springs
( 7 )
$159.00
—
$189.00
Weldon A2040 Series bypass fuel pressure regulators will exceed your performance expectations. They maintain a steady fuel delivery during dramatic changes in fuel demand, such as WOT conditions, boost application, and gear changes with precision pressure control. A2040 Series regulators are for use with all Weldon pumps, as well as pumps from other manufacturers. Features include: * .281 in. bypass orifice * Fluorosilicone diaphragm * Flows up to 6 gpm * 1/8 in. NPT gauge port * 1/8 in. NPT manifold pressure reference port * Fuel pressure increases on a 1:1 ratio with boost * Two -10 AN pressure ports/-8 AN return port * Billet aircraft aluminum with Mil-Spec anodizing * Compatible with gasoline, methanol, diesel, ethanol, most racing fuels
( 2 )
$225.19
—
$255.79
When the heat gets turned up, keep your cool with one of these Mishimoto ice tanks to your air-to-water intercooler setup! The secret to maintaining power levels is to ensure that your engine is getting the coolest, densest air possible. Even with an air-to-water intercooler and heat exchanger, keeping your intake air temperatures cool can be a challenge. Whether you're hot lapping at the drag strip, bouncing off the rev limiter drifting, or simply enjoying some spirited driving, giving your engine cooler air means more power and performance. Adding a Mishimoto ice tank to your air-to-water intercooler setup can help reduce IATs drastically, help reduce heat-soak, and adds fluid capacity to your system. These intercooler ice tanks are perfect for adding to an existing air-to-water system with a heat exchanger or for building a system from scratch. All Mishimoto products include their signature lifetime warranty. Product features and benefits: * Tank is constructed from fully TIG-welded aluminum * Offered in several different gallon size liquid capacities to better suit your intercooler setup * Designed with internal mounts to utilize a Rule 2000 or Rule 3700 internal bilge pump, or external pump of your choice * Large flip-open lid with lock for easy filling and secure containment of contents * Integral mounting flanges for stable and secure mounting in any location * 3/8 in. NPT drain plug for easy emptying * 1/2 in. NPT port for electrical bulkhead for water-tight wiring to internal pump * Includes 1/2 in. electrical bulkhead for wiring internal pump and 1/2 in. NPT plug if an external pump is used instead * -12 ORB inlet and outlet ports for a tight, leak-free seal * Combine with Mishimoto's universal air-to-water single pass intercooler or universal air-to-water dual pass intercooler (not included) * To complete your system, pair with -12ORB To 3/4 in. hose barb air-to-water intercooler fittings or -12ORB to -12AN air-to-water intercooler fittings (sold separately)
( 3 )
$224.95
—
$229.95
"Driven to Excellence", RCI has taken great pride in building the finest high-quality products at an affordable price, while maintaining a high safety standard for all types of racing for over 30 years. RCI uses 5052 aircraft aluminum alloy and TIG welding to make their aluminum street fuel cells lightweight and strong. Ranging in sizes from 12 to 19 gallons, they feature 12-bolt heavy-duty remote fill necks for use with standard 1 3/4 in. hose, a fuel pickup, return, rollover vent, and a sending unit. A billet aluminum cap is included for non-remote use. RCI aluminum street cells are available in natural aluminum color or powdercoated red, blue, or black.
( 133 )
$240.99
Maintaining bottle pressure is key in a well-performing nitrous system. Nitrous Outlet X-Series wraparound nitrous heater elements help you keep your bottles warm for a consistent flow of nitrous. These high-temperature silicone heaters will fit all brands of nitrous bottles and are easily installed and removed with Velcro® straps.
( 1 )
$100.99
Maintain optimal bottle pressure with Nitrous Outlet X-Series nitrous bottle heater kits. These high-temperature silicone wraps warm your 5, 10, or 15 lb. bottles efficiently to keep the inputted bottle pressure concise. And that means a better performing nitrous system with a consistent flow of nitrous, pass after pass. The kits include an adjustable bottle pressure switch that automatically activates the bottle heater as needed. Racing on a budget? Get higher performance at a lower price with the help of Nitrous Outlet X-Series nitrous bottle heater kits.
( 9 )
$193.99
K&N velocity stack air cleaners are designed for engines with the traditional round air cleaner housing and help provide more airflow to increase performance. These complete air filter assemblies consist of an open 360-degree, free-breathing Filtercharger element on top of a stainless steel or steel (application dependent) velocity stack base that features a polished or chrome mirror-like finish for added style under the hood. To maintain the filter, simply wet or roll in cleaning solution, hose the filter off, let it dry, reapply air filter oil, and reuse again. The air must flow—and it will when you order the K&N's velocity stack air cleaners best suited for your application!
( 37 )
$121.99
—
$145.99
Restore proper engine function with Dorman throttle bodies. These electronic assemblies will maintain the correct volume of airflow into your engine. Each of these units features a butterfly valve, which is electronically controlled by the ECU to precisely open and close for the correct regulation of the fuel/air mixture. Many feature cast aluminum housings with an exact fit for an easy installation. Dorman throttle bodies offer durable, reliable performance that is essential to the operation of your engine.
( 16 )
$141.99
—
$258.99
Holley RetroFilter air cleaners cleverly hide an LS drive-by-wire throttle body inside to maintain a low height and classic looks. Utilizing a hidden opening in the base to hide unsightly wiring from the throttle body, this trick air cleaner allows you to experience all the benefits of modern technology and keep the vintage look you want. Pair with any Holley intake manifold with a 4150/4610 square bore flange for maximum aesthetics and performance. The opening is 92mm, but any 4-bolt pattern LS throttle body will physically fit. Holley recommends the LS2/LS3/LS7 style but the L33, L76, and L92 should also fit. RetroFilter DBW air cleaners are available in a 16 in. round or 14 in. dual snorkel style with either a black or chrome finish. Choose the one you prefer under the hood of your vehicle. Features: * Allows full EFI functionality stealthily hidden within a traditional looking air cleaner package * Each kit includes a 3 in. tall, pre-oiled, washable, and reusable premium cotton gauze filter element * Adapts to LS-style drive-by-wire throttle bodies found on the LS2, LS3, LS7, etc. * Can be installed on any vehicle running a top mounted 4150/4-barrel EFI capable intake manifold with LS3 DBW wiring components * Stamped aluminum lid and base for optimal durability and lightweight Note: Requires adapter to connect to 4150/4160 square bore flange-style manifold. Holley EFI part no. 17-93 is recommended.
( 2 )
$211.95
—
$263.95
Bosch fuel pressure regulators are designed to maintain proper fuel pressure on your fuel injected engine. They are available in different styles and will fit your EFI system without any modifications. Keep your engine happy with one of these Bosch fuel pressure regulators.
( 20 )
$103.99
—
$135.99
Nitrous Outlet Dual Voltage Wrap Around Bottle Heaters warm the nitrous bottle to maintain optimal pressure, and can be used either with the 110 V wall plug or via the 12 V 14-gauge wires to be wired directly to your Nitrous Outlet switch panel. Bottle pressure is key in a well-performing nitrous system, and helps keep a consistent flow of nitrous—pass after pass. Additional details: * Bottle heaters have been tested, refined, and tested again to assure perfect fitment on 10, 12, and 15 lb. nitrous bottles of all brands * Bottle heater will fit all brand nitrous bottles and is easily installed and removed with one Velcro® wrap. * High-temp silicone * Maintains bottle pressure * 12 V, 300 watts, 21.74 amps
Not Yet Reviewed
$132.99
—
$225.99
Denso's proprietary turbine pump technology delivers the highest sustained fuel pressures in the industry, and is why Denso electric fuel pumps are chosen as standard equipment by the world's most demanding OEMs, especially for their premium vehicles. Denso's open-vane impellers are more efficient than competitors' closed-vane impellers. Their ultra-efficient design requires low-amperage to ensure optimum flow rates are maintained over time. Denso carefully balances the armatures at 3,000 rpm, then they are spun again at 8,000 rpm to minimize noise and vibration. Many competitors do not balance their armatures at all. Additional features of Denso electric fuel pumps include: * Turbine technology delivers fuel with minimal pressure pulsation for quieter operation * Check valve maintains consistent system pressure for superior hot fuel handling * Relief valve protects the fuel delivery system * Choke coils minimize radio interference * Brushes designed for durability, efficiency, and low-resistance operation
( 6 )
$100.99
—
$192.99
"Driven to Excellence", RCI has taken great pride in building the finest high-quality products at an affordable price, while maintaining a high safety standard for all types of racing for over 30 years. RCI Pro Street flat bottom drag race fuel cells feature tough polyethylene construction for maximum impact resistance, a 12-bolt heavy-duty aircraft-style, flush mount lid assembly with lever lock, return, rollover vent, and sending unit. RCI Pro Street drag race cells combine rugged construction with intelligent engineering to keep you safe and help you win.
( 14 )
$202.99
—
$220.99
Airaid SynthaMax air filters are 100 percent synthetic, non-oiled, and washable. Servicing them is simple—just wash with a mild household detergent and rinse. Even after several services, the filters look like new. Their oil-free maintenance makes them the easiest filters on the market to maintain. Plus, they provide unrivaled filtration efficiency over traditional paper elements. SynthaMax filters are available in a variety of styles and sizes for fitment on countless applications. Give your ride better airflow with Airaid!
( 7 )
$100.99
—
$188.99
Holley adjustable fuel injection regulators are able to provide all of the fuel pressure that your high performance, fuel injected vehicle will require. They utilize a special wave spring to maintain constant fuel pressure. Some models are universal fit, while others are designed for specific vehicle applications. The regulators are available for inline or fuel rail mount, with various psi ranges. Select the adjustable unit tailored to your driving needs.
( 43 )
$199.95
"Driven to Excellence", RCI has taken great pride in building the finest high-quality products at an affordable price, while maintaining a high safety standard for all types of racing for over 30 years. RCI uses 5052 aircraft aluminum alloy and TIG welding to make their aluminum racing fuel cells lightweight and strong. Ranging in sizes from 1 to 20 gallons, they feature 12-bolt heavy-duty aircraft-style flush mount lid assemblies, safety foam, fuel pickups, return, and rollover vent. RCI aluminum racing cells are available in natural aluminum color or powdercoated red, blue, or black.
( 64 )
$187.99
—
$275.99
All Balls Racing fuel pump modules are designed to restore lost performance on a broken or poorly functioning fuel pump. These electric in-tank modules draw less current than OEM units—while maintaining the same flow rate at working pressure—to reduce operating temperature and extend the life of the unit. Each pump includes a complete module, retaining nut, and gasket. Order the replacement fuel pump module designed to fit your ATV/UTV application.
( 10 )
$158.59
—
$267.14
Nitrous Express bottle heater elements make your cold days warmer--and more productive! Optimum performance needs optimum nitrous pressure, and that means keeping your bottle at the right temperature. These Nitrous Express element-only heaters are pressure-controlled to maintain the right temperature for consistent nitrous pressure. The heater elements have surface temperatures above 300 degrees. Take your nitrous bottle from ice cold to operating pressure in minutes when it's wrapped in Nitrous Express bottle heater elements.
( 1 )
$149.23
—
$189.49
"Driven to Excellence", RCI has taken great pride in building the finest high-quality products at an affordable price, while maintaining a high safety standard for all types of racing for over 30 years. RCI uses 5052 aircraft aluminum alloy and TIG welding to make their Pro Street flat bottom cells lightweight and strong. They feature 12-bolt heavy-duty aircraft-style flush mount lid assemblies, fuel pickups, return, and rollover vent. RCI Pro Street fuel cells are available in natural aluminum color or powdercoated red, blue, or black.
( 18 )
$240.99
Dorman fuel vapor canisters effectively prevent fuel vapors from escaping into the atmosphere. Manufactured from robust materials, they're designed to match the original equipment EVAP canister on specific year/make and model vehicles to properly restore emissions controls. In addition, Dorman fuel vapor canisters have been rigorously tested to ensure trouble-free performance when installed. Maintain your evap system's ability to reduce emissions with the OE fit and function of these Dorman fuel vapor canisters.
( 8 )
$101.95
—
$259.95
Jaz Products maintains its own factory, equipment, and molds, producing the highest quality fuel cells designed for street/strip usage. Jaz Products street rod fuel cells have been rotationally molded in seamless, cross-linked polyethylene to provide strength, durability, and quality performance. Jaz Products street rod fuel cells are available with or without aviation safety foam.
( 11 )
$219.99
—
$259.99
Replace your existing metering block with Proform's standard replacement billet metering blocks. They are designed for use with all 2300, 4150, and 4160 models, except carburetors with an accelerator pump transfer tube or reverse-idle system. The billet-machined blocks virtually eliminate porosity problems and will improve throttle response over stock "universal" performance metering blocks. The metering blocks maintain the original timed spark or ported vacuum tube and are compatible with standard fuel bowl and metering block gaskets.
( 13 )
$105.95
"Driven to Excellence", RCI has taken great pride in building the finest high-quality products at an affordable price, while maintaining a high safety standard for all types of racing for over 30 years. RCI Standard Circle Track fuel cells are available in two versions, several sizes, and either side-to-side or front-to-back styles. All Standard complete cells offer spot-welded steel construction with cross-linked, high-strength polyethylene bladders and the cans are powdercoated in red, black, or white. Each features a 2.5 in. lid assembly with flapper, fuel pickup in the right rear, and vent. Ranging in sizes from 3 to 32 gallon, the 22 gallon and larger cells include fuel return and are available in SFI-approved models (black only) with safety foam.
( 22 )
$243.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
