Availability
Showing In Stock Items. Show All 33 Items.
Need extra fuel ports? Nitrous Express fuel logs are offered in 3-, 4-, and 5-port versions to give your engine the extra fuel it may need. NX fuel logs are constructed of anodized aluminum for less weight, more strength, and great looks! Less restriction and more flow, go fast with Nitrous Express fuel logs.
Not Yet Reviewed
$108.29
BluePrint Engines muscle car swap air intake kits are designed to provide proper frequency and location of the mass airflow sensor used with GM controllers. They have been tested on throttle bodies from 80mm to 102mm, and each kit includes filter, tube, MAF receptacle, block-off, clamps, couplers, and hardware. Features and specs: * Red, oil-less cotton gauze washable filter * Total height from base is 7 in. * 4.750 in. black silicon cap * 6 in. inlet * Aluminum intake tube with 97.5mm I.D. * Five stainless steel hose clamps * Tube-to-filter adapter * Three silicon couplers * Silicon clean air hose * Vacuum cap * MAF block-off plate, gasket, and hardware Note: May require modifications based on the wide applications that BluePrint's engines are installed into. Custom installation and modifications, such as drilling a hole for intake air temp on some models.
Not Yet Reviewed
$129.99
JR Race Car Mikuni 28mm jet block kits provide an assortment of jets and a place to store them. These kits include 10 main, five pilot, and eight air jets, plus a billet aluminum block to screw them into when not in use. You'll have a range of jets for your Mikuni tuning with block kits from JR Race Car. Jets included: * Main jets--165, 170, 175, 180, 185, 190, 195, 200, 205, 210 * Air jets--.6, .7, .8, .9, 1.0, 1.1, 1.2, 1.3 * Pilot--.052, .055, .059, 0.63, blank
( 2 )
$143.59
AED's Pro-Series billet metering blocks feature totally tunable, screw-in, replaceable bleeds in all circuits. They feature a special-length circuit with five separate emulsion bleeds. If you're a serious tuner trying to fully maximize your combination, then these are a must! Billet blocks are available in two and three circuits with gas or alcohol. All billet metering blocks are machined from billet 6061 stock and anodized for appearance and protection.
( 1 )
$119.99
—
$127.99
Volant MaxFlow 5 filters are high performance air filters made up of five layers--four cotton gauze and one synthetic--pleated between a top and bottom aluminum screen. This design allows for the highest airflow rate possible and a very long filter life. These cleanable and reusable filters come pre-oiled and ready for use.
( 27 )
$101.90
JR Race Car Mikuni 28mm jet block kits provide an assortment of jets and a place to store them. The kits include 10 main, five pilot, and eight air jets, plus a billet aluminum block to screw them into when not in use. You'll have a range of jets for your Mikuni tuning with block kits from JR Race Car. Jets included: * Main jets--410, 420, 430, 440, 450, 460, 470, 480, 490, 500 * Air jets--.5, .6, .7, .8, .9, 1.0, 1.1, 1.2 * Pilot--65, 70, 75, 80, 85
Not Yet Reviewed
$125.29
Pro GUARD 7 air filters from aFe are specifically developed for today's demanding diesel and rigorous off-road applications. They have five layers of cotton gauze and two layers of synthetic fabric, combined with their own specially formulated filter oil, to achieve amazingly high filtration levels without sacrificing airflow. The elements are available in a variety of styles and sizes—for both universal and vehicle-specific applications. Additional features: * Integrated polyurethane bump seal * 100 percent polyurethane top and bottom * 99.7 percent filtration efficiency
( 19 )
$103.00
—
$268.00
Introducing the Turbo-Guard billet turbo inlet screens, the ultimate in turbo protection! These inlet screens are designed to protect your turbo and engine against any debris, such as pebbles and rocks, from entering the turbocharger. Crafted with precision, these screen mesh guards are machined from billet 6061 aluminum—built to withstand the harshest conditions to protect your boost system with unparalleled strength. They are available in different diameters—radiused to allow for maximum airflow. Choose from five stunning anodized finishes: black, purple, red, blue, and gold. Each color will not only complement your vehicle, they also will add a sleek, stylish flair. Upgrade your protection with the Turbo-Guard Billet today and drive with confidence for years to come! Select the billet turbo inlet screen in the size and color preferred for your application. Key features: * Unmatched durability—built to protect your boost system with unparalleled strength * Easy installation, no clamps required * Comes with 2 set screws and LockTite
Not Yet Reviewed
$139.99
—
$149.99
aFe Magnum FLOW Pro 5R air filters are available for a wide range of vehicle-specific applications, as well as universal-fit models. With up to a 38 percent increase in flow over stock, Pro 5R air filters feature factory-oiled cotton media for maximum performance. Their progressive bump seal design and polyurethane frame makes them extremely durable and simple to install. The filters are available in different sizes and styles, including panel and conical. * Washable and reusable for multiple cleaning cycles: Pro 5R filter media features five layers of progressive oiled cotton gauze for maximum performance. Deep, open pleats allow for increased surface area, flow, and dust holding dapacity * Pro 5R filter media: Progressive layering allows the filter to flow at high levels even when dirty. This media is perfect for street and/or track use. Pro 5R filters are easily recharged with aFe's Power Cleaner and blue air filter oil. * Rounded deep open pleats: aFe Power performance air filters use a rounded, evenly spaced pleat design which allows for more usable filter surface area, providing increased flow and greater dust holding capacity. * Progressive bump seal: This pliable sealing surface conforms to even the most uneven filter housing, making for a perfect filter fit and sealing surface every time. This design eliminates the use of gaskets or sealants and always goes back to its original form.
( 1 )
$103.00
—
$220.00
The aFe Magnum Force Stage 1 Pro 5R air intake systems are powerful units capable of outflowing your factory intake by up to 150 percent. They feature a highly engineered heat-shielded air box with a welded-on adapter for direct fitment to your stock intake tract—and an air filter with five layers of progressively finer mesh cotton gauze media for ultimate filtration. These performance intakes provide a hassle-free installation utilizing factory mounting locations. Dozens of models are available for fitment on specific vehicle applications.
( 3 )
$268.00
Volant's Primo filters address the need for extra protection from dust and debris with a washable/reusable, oil-impregnated cotton gauze filter. These Volant Primo filters feature a new filtration technology aptly called Pro-Guard 7 that's been designed to catch the smallest of particles as air passes through the filters. They're made of five layers of cotton gauze and two layers of a random-porosity, non-woven synthetic polyester fabric that are sandwiched between an epoxy coated aluminum wire mesh.
( 4 )
$113.90
—
$123.90
Get clean, cool air to your engine quickly with an aFe Super Stock Pro 5R air intake system. These assemblies vary by application, but all retain your factory air box and upgrade your stock air filter to aFe's high performance Pro 5R—five layers of progressive filtration with high airflow levels. Intake tubes are mandrel-bent for unrestricted airflow. aFe Super Stock Pro 5R air intake systems are fast performance upgrades that give your engine more cool, dense air to breathe, making it more efficient to produce more power. Order the model designed for your vehicle.
( 1 )
$205.00
—
$249.00
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 67 )
$268.00
With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, aFe Takeda Pro 5R air filter "oiled" elements provide excellent airflow for maximum horsepower and torque. Washable and reusable, the Pro 5Rs' open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings. Takeda filter elements have a pliable polyurethane flange with integrated bumps, ensuring tight, no-leak seal over the life of the filter element. Pick the replacement element sized for your intake system.
Not Yet Reviewed
$103.00
—
$169.00
Clearance
Cardone remanufactured throttle bodies use 100 percent computerized testing of motor, throttle position sensor, and articulation to ensure reliable and consistent performance. Each unit is disassembled and every component is inspected, remanufactured or replaced to ensure a durable, high-quality product. Specialized component cleaning processes prevent the throttle bore surface from being deformed—facilitating optimum airflow. For impeccable fit, function, and savings, order the Cardone remanufactured throttle body designed for your vehicle application.
( 16 )
$159.99
$111.50
Summit Racing™ mechanical wastegates are constructed of cast stainless steel and 6061 aluminum with a black anodized finish. These valves control the flow of exhaust gases to the turbine wheel in a turbocharged engine system. Their primary function is to regulate the maximum boost pressure in turbocharger systems, to protect the engine and the turbocharger. Order the relief diameter preferred for your application.
( 29 )
$100.99
Available in a variety of sizes and valve flow styles, these bottles from Nitrous Express make it easy to design your system. Constructed from aluminum, they are available in white powdercoated or polished finishes.
( 6 )
$166.51
—
$243.80
Be prepared at the race track by keeping extra nitrous bottles in the trailer. These ZEX nitrous bottles are available in purple or polished finishes and come with a chrome bottle valve, a chrome bottle nut, a bottle valve fitting, a PTFE bottle valve seal, and a siphon. They come in your choice of 2 lb., 5 lb., 10 lb., or 15 lb. sizes.
( 4 )
$237.95
Nitrous Outlet has a selection of nitrous oxide bottles made from powdercoated machined aluminum or lightweight spun carbon fiber that will add a show-quality appeal to your setup. They are available in capacities to suit many applications. Feed your vehicle power juice from Nitrous Outlet nitrous oxide bottles.
( 6 )
$246.99
—
$272.99
Be prepared at the race track by keeping extra nitrous bottles in your trailer. The FAST nitrous bottles feature a high-grade aluminum construction. They are available in your choice of 2 lb., 5 lb., 10 lb., or 15 lb. sizes, and in your choice of finishes, either polished or durable anodized black or purple. Each bottle comes with top-of-the-line quality components: a chrome bottle valve, a chrome bottle nut, a bottle valve fitting, a PTFE bottle valve seal, and a siphon. Order the nitrous bottle size better suited for your application needs.
Not Yet Reviewed
$209.95
—
$237.95
The SeaSucker RotopaX tank holders are powered by two 6 in. SeaSucker mounts, and easily attach your existing tank and hardware. The tank holders come in models compatible for 3-gallon and 5-gallon RotopaX tanks and will allow you to put your tanks on when you need them and remove them in seconds when you don't. RotopaX tank and hardware not included. You supply the RotopaX tank, and SeaSucker will make hauling it even easier!
Not Yet Reviewed
$249.00
Wiseco offers carburetor jet kits for Keihin and Mikuni carburetors to allow tuning after an exhaust or other type of engine modification. These tuning kits will help improve mid-range throttle response and add additional fuel to wide-open throttle running conditions. The kits have multiple jets per size, a wide jet range, and separate kits for either main or pilot jets to provide you with endless tuning capabilities. Whether you're planning to play with your low-end or high-end by jetting your carburetor, Wiseco has the jet kit for you!
Not Yet Reviewed
$233.99
—
$282.99
Whether you're rejetting for altitude changes, optimizing your air-fuel ratio, or upgrading for better performance, Pro-X pilot jets offer precise sizing, uniform flow rates, and race-proven reliability. With strict quality control and precision machining, these jets eliminate hesitation, improve fuel efficiency, and ensure crisp throttle transitions, making them the perfect choice for riders, mechanics, and tuners looking to maximize engine performance. Pro-X Racing Keihin pilot jets will fit many Keihin carburetors, like PJ, PWK, PWM, some smoothbore carbs, etc. Pro-X offers a wide range of jets for N424-21, N424-26, N424-74C Series. Pro-X pilot jets are manufactured in Japan to exact OEM specification and are a cost efficient alternative for the relative expensive original parts. Fine-tune your carburetor for altitude changes, aftermarket modifications, and peak performance tuning using Pro-X jets. Select the jet sizes needed for your off-road ride.
Not Yet Reviewed
$246.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
