Availability
Showing In Stock Items. Show All 15 Items.
On Sale
Nitrous Outlet is excited to release its new WinMax dual-channel window switches for nitrous activation. The WinMax is a user-friendly device that's easy to read and program. The detailed instructions will walk you through all of the options such as RPM, TPS, gear lockout, shift light, and single or dual-stage configuration. WinMax incorporates everything you love about Nitrous Outlet products. Additional features of WinMax dual-channel window switches: * Live RPM and TPS displays * Two timing retard outputs * Single or dual-stage control * Bright backlit LCD display * Multiple gear lockouts * Stage 1 and Stage 2 activation LED indicator * Built-in bright LED shift light * Works with any 4-cycle engine (with 1 to 12 cylinders) * Perfect for a Drive-by-Wire vehicle * TPS activation and deactivation * RPM activation and deactivation * Works with a wide-open throttle switch
( 8 )
$283.99
$241.39
On Sale
Holley dual tank fuel pump kits will allow you to pick up additional fuel in the tank. They include an in-tank fuel pump, relay, wiring harness, and fuel filter. The fuel pump kits are available for 1, 2, and 4-barrel Pro-Jection systems.
( 3 )
$145.95
$131.35
On Sale
Holley Sniper 2 EFI Power Distribution Modules (PDM) are cost-effective and optional accessories that isolate the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. The PDM also distributes power to your EFI fuel pump and a single fan (second fan can be ground triggered through the included input/output harness). Two additional 2-amp circuits can power low-current accessories like gauges or to trigger relays. Battery and a switched 12 V source are all that's required from your vehicle to power the PDM. Product details: * Provides conditioned Power, Ground and Switched connections for ALL components within a Sniper 2 EFI install. (Throttle Body, Fuel Pump, HyperSpark Ignition System, and Optional Fan) * 3 relay channels – 15 amp Powertrain (Sniper throttle body and ignition system) 25 amp - Fuel pump output – 25 amp fan output * LED status indicators, show you which channel is triggered at a glance * Removable cover for easy accessibility, with wiring diagram built into the lid, like a fuel panel
( 7 )
$189.95
$170.95
On Sale
These Holley Sniper 2 EFI PDM main harnesses includes the switched 12V power wire, main battery power and ground, coil input wire, and HyperSpark distributor connector. They feature a braided split wire loom to keep the wires protected and your engine bay clean! They are intended to be used on applications with a PDM, and do not include a fuel pump relay. Holley Sniper 2 EFI PDM main harnesses include: * One 5 ft. 12 gauge main battery power wire * One 5 ft. 12 gauge main battery ground wire * One 30 amp fuse * One 20 ft. 20 gauge fuel pump trigger wire * One 3 ft. 20 gauge coil input wire * One 5 ft. 20 gauge switch 12V ignition wire
( 3 )
$145.95
$131.35
On Sale
Maintain optimal bottle pressure with Nitrous Outlet X-Series nitrous bottle heater kits. These high-temperature silicone wraps warm your 5, 10, or 15 lb. bottles efficiently to keep the inputted bottle pressure concise. And that means a better performing nitrous system with a consistent flow of nitrous, pass after pass. The kits include an adjustable bottle pressure switch that automatically activates the bottle heater as needed. Racing on a budget? Get higher performance at a lower price with the help of Nitrous Outlet X-Series nitrous bottle heater kits.
( 9 )
$193.99
$164.89
On Sale
Holley Sniper EFI main wiring harnesses include the switched 12 V power wire, main battery power and ground, fuel pump relay, coil input wire, and magnetic distributor input wire. These kits also include 6 ft. of 3/8 in. black braided split wire loom to keep the wires clean and protected from abrasion. Includes: * 5 ft. of 12-gauge main battery power wire * 5 ft. of 12-gauge main battery ground wire * 30 amp fuse and cover with mounting tab * 40 amp 5-pole relay with mounting tab * 20 ft. of 12-gauge fuel pump 12 V power wire * 3 ft. of 20-gauge crank signal positive wire * 3 ft. 20-gauge crank signal negative wire * 3 ft. 20-gauge coil input wire * 5 ft. 20-gauge switch 12 V ignition wire
( 1 )
$164.95
$148.45
On Sale
Holley Sniper 2 EFI main wiring harnesses include the switched 12 V power wire, main battery power and ground, fuel pump relay, coil - input wire, and HyperSpark distributor connector. This harness is braided split-wire loom to keep the wires protected and your engine bay clean! Holley Sniper 2 EFI main wiring harnesses feature: * One 5 ft. 12 gauge main battery power wire * One 5 ft. 12 gauge main battery ground wire * One 30 amp fuse with cover with mounting tab for a secure installation * One 40 amp 5-pole relay with mounting tab for a secure installation * One 20 ft. 12 gauge fuel pump 12 V power wire * One 3 ft. 20 gauge coil input wire * One 5 ft. 20 gauge switch 12 V ignition wire
( 1 )
$212.95
$191.65
On Sale
Nitrous Outlet Dual Voltage Wrap Around Bottle Heaters warm the nitrous bottle to maintain optimal pressure, and can be used either with the 110 V wall plug or via the 12 V 14-gauge wires to be wired directly to your Nitrous Outlet switch panel. Bottle pressure is key in a well-performing nitrous system, and helps keep a consistent flow of nitrous—pass after pass. Additional details: * Bottle heaters have been tested, refined, and tested again to assure perfect fitment on 10, 12, and 15 lb. nitrous bottles of all brands * Bottle heater will fit all brand nitrous bottles and is easily installed and removed with one Velcro® wrap. * High-temp silicone * Maintains bottle pressure * 12 V, 300 watts, 21.74 amps
Not Yet Reviewed
$132.99
—
$225.99
$113.04
—
$192.09
On Sale
Holley multi-map selectors are specifically designed for use with Holley Dominator EFI systems. They allow up to four different calibrations to be selected at vehicle key-on. The included switch is connected into the J3 ECU connector. Multiple maps can be used for many different purposes, such as various fuel types or octanes; charting track conditions, nitrous setups, and more.
Not Yet Reviewed
$172.95
$155.65
On Sale
Pop your bottle for power—from your driver's seat—with Nitrous Outlet remote nitrous bottle openers. These openers are switch activated, feature thumb-twist screws to easily remove the opener if needed, and include all wiring and hardware. They were designed to work with Nitrous Outlet bottles, but are compatible with most other brand bottle valves, as well. Getting out of the driver's seat to open the bottle can be a hassle. Instead, open and close your nitrous bottle with a simple flick of your Nitrous Outlet remote openers.
( 2 )
$304.99
$259.24
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$399.95
$259.95
On Sale
AEM water/methanol injection pumps help to increase the power of your engine. These recirculation-style pumps make great replacements for most water/methanol kits. Or, use them when creating your own special setup. AEM upgrades their pumps to ensure consistent fluid delivery for optimum performance with no erratic on/off pulsing, unlike older switched-styles. Their water/methanol injection pumps are designed with Santoprene diaphragms and EPDM seals to withstand the harshest of alcohol mixes. For better performance, consider an AEM water/methanol injection pump.
( 11 )
$199.95
$179.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
