Availability
Summit Racing™ TV cable corrector bracket kits are designed to connect an overdrive transmission's kickdown cable to the carburetor and keep your throttle cable from being pulled out of proper alignment when you reach full throttle. They maintain and adjust throttle linkage geometry to create optimum throttle opening. These brackets are made of steel and have a gold iridited or black powdercoated finish for protection.
( 63 )
$19.99
Vibrant Performance clamp replacement components keep your clamping system leak-free! If you need to replace any part of your clamps, Vibrant offers all of the components separately. Replacements are all made of the same quality T6061 aluminum as the originals. The spring-loaded quick-release clamps with the Vibrant logo, the hard-anodized union sleeves, and the weld-on fittings with O-rings are all available. Maintain your flexible clamp with replacement components from Vibrant.
( 1 )
$20.50
—
$22.50
MagnaFuel electric fuel pump rebuild and seal kits are designed to keep your fuel pump working properly. The seal kits are composed of the exact same seals that went into your MagnaFuel pump when it was new. The rebuild kits include the parts necessary to maintain optimum fuel flow and are of the highest quality available. If you're having problems with your fuel pump leaking or not holding pressure, then pick up one of these MagnaFuel electric fuel pump seal or rebuild kits. Or, keep a seal kit in your toolbox just in case.
( 39 )
$16.99
—
$22.79
AED Hi-Flow carburetor needle and seat assemblies are must-haves for any HP application. They help you maintain that constant fuel level that is so important for consistency and low ETs—making them ideal for drag racing, superchargers, and blow-through applications. Get that AED performance edge with the AED Hi-Flow needle and seat assemblies best suited for your application.
( 1 )
$14.99
Pacific Performance Engineering race fuel pressure relief valves are designed to replace the stock original. Machined from heat-treated stainless steel, these fittings help maintain fuel rail pressure during heavy engine load conditions. The PPE valves eliminate the potential low pressure DTC codes P1093 or P0087 (during power enrichment) caused by insufficient pressure relief valve spring pressure. Order the model recommended for your application.
( 11 )
$22.49
Redhorse Performance 566 Series roll over vent valves are optional fittings designed for their in-tank retrofit fuel modules. RHP has made it easy to convert to an EFI fuel system, and to maintain safety by adding these valves to vent your fuel tank and prevent leaking in case of an accident or roll over. These fuel cell fittings are installed by drilling a hole in the top surface of your fuel cell or tank, and two PTFE sealing washers are provided for both the inside and outside of the cell. These quality aluminum fittings have an anodized finish for added durability. Order the best fit for your application.
Not Yet Reviewed
$23.13
If you smell and see fuel residue on your fuel tank, check your hoses. Spectra Premium fuel tank filler neck hoses are manufactured with high-quality rubber to ensure they maintain their dimensional characteristics, even in extreme cold/hot weather variations. They are OE-designed, ensuring the exact form, function, and fit needed to ensure ease of installation for the application.
( 10 )
$10.99
—
$21.99
Summit Bucks
Fel-Pro fuel injector O-ring sets help maintain performance vehicle. These replacement rings are engineered to offer a good, tight seal and prevent fuel leakage into hot engine compartments. Over time, your factory O-rings can become worn or cracked—leading to erratic fuel injection. Update the small accessories with the Fel-Pro set recommended for your vehicle and engine application.
( 9 )
$11.99
—
$22.99
Saving money is smart. Choosing Standard Motor carburetor rebuild kits is genius! These packages contain the necessary high-quality components you'll need to restore your carburetor to like-new performance. The economical parts and gaskets are available for many applications, offering the proper form, fit, and function to ensure reliable service. You've got the smarts … and Standard Motor has the parts; do the work yourself, maintain optimum performance, and save money with their carburetor rebuild kits.
( 219 )
$12.99
—
$20.99
AED offers stock replacement floats for side-hung float bowls (600 style), and brass, nitrophyl, and duracron stock replacement floats for center-hung float bowls (double pumper). For racing, they offer specially modified nitrophyl floats for sideways mount, oval track, and drag race applications. These are a must in high G-force situations where maintaining a consistent fuel level is paramount. All racing floats are machined, weighted, and sealed.
( 6 )
$11.99
—
$19.99
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg service parts. Their manifold stud kits come with stainless lock washers and nuts. Available in sets of three or four studs, these kits are precision-made for a no-hassle rebuild. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
( 2 )
$15.25
—
$19.95
On Sale
If you're having problems with your OE fuel pump leaking or not holding pressure, then pick up one of Waterman Racing's fuel pump rebuild kits. The rebuild kits include the parts necessary to maintain optimum fuel flow and are of the highest quality available to keep your fuel pump working properly.
( 1 )
$20.99
—
$22.99
$18.89
—
$20.69
Rough idle, hard starting, and the check engine light--these are a few symptoms that can alert the driver that a potential EVAP problem has occurred. Standard Motor vapor canister components featurie industrial-grade materials for robust performance, they are manufactured for prolonged life and superior performance. As a global manufacturer of emission components, Standard Motor maintains complete quality control through the manufacturing process from start to finish.
( 16 )
$11.99
—
$21.99
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg service parts. Their brass idle adjusting screws and springs are given a gold iridited finish and precision-made for a no-hassle rebuild. The float is supplied with new float pin. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
( 1 )
$14.75
Air out, gas in; Crown Automotive fuel filler vent hoses will restore smooth flowing fill-ups at the pump. Rubber hoses can become damaged or deteriorate over time, not allowing air and vapors to escape the tank, but any fuel hoses should always be maintained properly for safety reasons. If you see signs that your fuel filler vent hose needs to be replaced, choose yours from the Jeep selection at Crown Automotive.
( 16 )
$17.99
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg restoration parts. Their body screw kits contain stainless steel screws and washers--eight each--to renew your Stromberg. And since they are the real deal, you won't have to worry about proper threading. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
( 3 )
$12.75
Worn-out seals on a motorcycle or all-terrain vehicle can quickly lead to performance loss or mechanical failure. Mikuni offers a line of fuel pump repair kits to maintain your powersports equipment. These economical packages include all of the necessary parts to rebuild specific pumps, such as gaskets, diaphragms, and valves (depending on model). Repair your leaky fuel pump with help from Mikuni, a world leader in carburetor and fuel related components for nearly half a century. Order the Mikuni fuel pump repair kit that is designed for fitment with your specific pump application.
( 2 )
$15.99
—
$22.79
Mikuni 8 Series carburetor needles are high-precision and calibrated for an extremely accurate fuel flow rate. Designed to suit the Mikuni HSR Carbs, these jet needles are also suitable for Harley-Davidson® and other motorcycle applications. The jet needles are the tapered rods that are positioned in the throttle valve by the 'E'-Clip. The taper of the needle increases the clearance between the jet needle and the fixed needle jet outlet as the throttle is opened. As the air flow volume increases past the throttle slide, the fuel volume is also increased to maintain the correct air/fuel ratio. The Mikuni 8 Series jet needles are manufactured from brass to offer long and reliable service to help improve the performance of your motorcycle or ATV, keeping your ride running in peak condition.
Not Yet Reviewed
$17.99
—
$22.99
Without clean fuel, nothing runs. Hengst fuel filter elements help to maintain the operational safety of the engine and protect the injection system from contamination. Injection systems for modern gas and diesel engines are sensitive to the smallest fuel impurities, and if the fuel filter element is not changed according to the prescribed cycle, injection systems can become clogged and operational safety impaired. Hengst filter elements utilize state-of-the-art filtration materials to reliably remove dirt particles and water from the fuels used, protecting your system from contamination, and maintaining operational safety of your engine. Plus, Hengst filter elements retain their first-class filtration effect over particularly long change intervals, so that your engine can consistently and reliably shine with top performance.
Not Yet Reviewed
$12.50
—
$21.99
Eddie Motorsports air filter elements help to maintain a clean airflow to your engine. They offer a selection of elements in shapes and sizes, as well as in paper or washable, reusable cotton gauze to fit different applications. Order the model designed for fitment in your air cleaner housing.
( 11 )
$15.00
—
$20.00
On Sale
Clean fuel is vital to maintaining engine performance. You can help keep your marine engine running at its peak with a premium Quicksilver water separating fuel filter. The premium filtration element helps prevent harmful moisture and filters contaminants from entering your engine's fuel system so you can enjoy the most from your time on the water, with the peace of mind that your engine is protected. Each Quicksilver filter is built to OEM-quality specifications and designed to provide maximum water separation while maintaining high flow rates. This leads to smoother engine operation, improved fuel efficiency, and better overall performance. Durable construction helps to ensure your filter continues to deliver reliable performance, even in tough marine conditions. Order the Quicksilver fuel filter designed for your vessel's specific application. Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries. Quicksilver has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design of Quicksilver. Purchasing Quicksilver's quality products is buying performance, protection and peace of mind.
Not Yet Reviewed
$13.99
$12.59
Edelbrock accelerator pump diaphragms are available to service your popular high performance non-Edelbrock carburetors. Routine maintenance on your carburetor helps maintain optimal performance. When replacing your defective component, accelerator pump diaphragms from Edelbrock are quality replacements from a name you know.
Not Yet Reviewed
$13.95
The idle air control valve is an electrically controlled device, which gets its input from the vehicle's Engine Control Unit (ECU). The actuator is fitted such that it either bypasses the throttle or operates the throttle directly. The IAC allows the ECU to maintain minimum RPM irrespective of changes in engine load, sometimes referred to as an anti-stall feature. Holstein Parts uses only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. Holstein Parts idle air control Valves offer superior coverage for domestic and import applications.
( 1 )
$16.99
—
$19.99
These JET standard main carburetor jets are precision-manufactured to ensure accurate flow. They give you a consistent and predictable flow difference from each jet number. Available in different sizes, the JET standard main carburetor jets let you tune-in your carburetor to maintain optimum performance.
( 11 )
$11.21
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
