Availability
Showing In Stock Items. Show All 74 Items.
On Sale
Holley carburetor float kits work with side-hung and center-hung Demon and aftermarket Holley carburetor floats, as well as many OE Holley, Ford, Chrysler, GM, Motorcraft, AMC, and Rochester marine carburetors. Offered in brass and Nitrophyl for internally and externally adjustable floats, they're available as primary floats, secondary floats, and secondary floats with notches that include jet extensions. Holley's wedged floats feature a reinforced float bracket assembly that allows more fuel to flow through the bracket—especially when using bottom-feed needles and seats. Technical notes for Holley carburetor float kits: * Wedged floats are designed for oval track use, so the float stays open in turns * The use of brass floats on the secondary side of Model 4160 carburetors factory-equipped with Nitrophyl floats may result in loss of fuel control and flooding if the floats contact the metering plate * You should only install jet extensions and notched floats in rear fuel bowls
( 108 )
$20.32
$18.15
—
$19.58
Eliminate any spills on the road or the track with rollover vent valves from Tanks Inc. These long-lasting brass vent valves help keep any debris or gunk out of the fuel tank. In case of an accident, sudden stop, or driving over rough terrain, rollover vent valves will keep fuel from coming out of the vent. Tanks Inc. rollover vent valves are just the solution you've been looking for!
( 15 )
$16.99
—
$19.99
On Sale
Holley standard main jets are just what you need to fine-tune your carburetor for street or race performance. Threaded for easy installation and removal, they manufacture these brass jets to high tolerances for consistency. They're available in dozens of jet and jet drill sizes for precise fitment on countless gasoline-fueled vehicles. When considering replacement parts for your carburetor, trust the expertise of Holley.
( 199 )
$14.33
$12.56
—
$15.38
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock Performer series and Thunder series AVS carburetors only. Do not use them with any other brands.
( 68 )
$14.95
—
$15.95
These Quick Fuel carburetor idle feed restrictors are designed to control the fuel side of the idle and off-idle system. They are manufactured from durable brass and install easily into the Quick Fuel billet aluminum metering blocks. Available in different sizes, Quick Fuel carburetor idle feed restrictors will help you fine-tune your carburetor to your specific engine combination.
( 12 )
$12.56
Get rid of those old fuel bowl floats—and upgrade to a Summit Racing™ carburetor float. They're manufactured from Nitrophyl or brass and include thread-in brass jet extensions (where noted). Available for side hung or center hung fuel bowls, Summit Racing™ floats will keep your fuel level where it's supposed to be. Order the model recommended for your carburetor application.
( 28 )
$11.99
—
$16.99
On Sale
Upgrade your carburetor's hardware for maximum performance with the help of Holley. Their needle and seat hardware kits work with all Holley carbs with an adjustable needle and seat. Also keeping style in mind, these kits are offered in gold or black. Kits include adjusting nut, lock screw, gaskets, and O-ring.
( 20 )
$11.40
$10.26
—
$12.58
Your genuine Stromberg carburetors come with size 0.045 jets, but if you want to change the jet size, make sure that you get the genuine article for your carburetor. Stromberg main jets are the real deal. Crafted from brass, these beauties are available in all jetting sizes to match your application. Look for the genuine Stromberg "S" stamped on every part and you'll know that you have the right part and the best quality for your Stromberg 97, 40, 48, and 81 carburetors.
( 10 )
$11.50
Holley carburetor metering block main well plugs are designed to block off passages in the secondary metering blocks. They are manufactured from durable brass and press in place easily.
( 2 )
$21.00
AED offers stock replacement floats for side-hung float bowls (600 style), and brass, nitrophyl, and duracron stock replacement floats for center-hung float bowls (double pumper). For racing, they offer specially modified nitrophyl floats for sideways mount, oval track, and drag race applications. These are a must in high G-force situations where maintaining a consistent fuel level is paramount. All racing floats are machined, weighted, and sealed.
( 6 )
$11.99
—
$12.99
Engine Works offers needle and seat replacements for a variety of Holley carburetors. They are the first stop for the flow of fuel coming into a carburetor—essentially, a basic valve. The seat is typically conical and the needle has a point which seals against the seat to stop fuel from entering the carb at a certain level. This prevents flooding the engine and engine compartment. Needles are available in brass or stainless steel; and seat size options vary from 0.110 in. to 0.150 in.
Not Yet Reviewed
$14.36
—
$24.96
On Sale
Keep your carb precisely tuned for efficient performance. Holley air bleed kits are designed to fine-tune your carburetor's intermediate and high-speed circuits. They are made from high-quality brass.
( 14 )
$28.03
$15.42
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg service parts. Their brass idle adjusting screws and springs are given a gold iridited finish and precision-made for a no-hassle rebuild. The float is supplied with new float pin. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
( 1 )
$14.75
Clearance
Mikuni low-speed jets are designed to be used in Super BN watercraft carburetors. The jets are made of brass and are available in different sizes. Order the Mikuni low-speed jets designed to fit your application needs.
Not Yet Reviewed
$14.99
Edelbrock offers standard main jets for Holley carburetors. These brass jets are threaded, easy to install and replace, and are stamped with the size. When you need carburetor service parts for your high performance Holley, look to Edelbrock, a proven performance leader.
Not Yet Reviewed
$14.95
Engine Works main jets are high-quality brass pieces machined to tight tolerances. They are offered in a wide range of jet sizes and available in a 2- or 10-pack. Choose the size and quantity needed.
Not Yet Reviewed
$16.21
Clearance
Highly developed engines use fuel more efficiently, but not if they're poorly tuned. Mikuni pilot jets are one piece of your tuning puzzle. Pilot jets are replaceable and the pilot air screw is adjustable. If the jet is too large or the air screw is in too far, then the air/fuel mixture may be too rich. That's one reason why Mikuni pilot jets come in different sizes. The brass pilot jets will deliver a precise amount of fuel so you can have your machine running perfectly. Don't waste time trying to do the impossible--replace your pilot jets and start having fun.
( 2 )
$17.99
—
$20.99
These Mikuni 6 Series carburetor needles are high-precision and calibrated for an extremely accurate fuel flow rate. They are manufactured from brass for a long and reliable life. Mikuni 6 Series needles can help to improve the performance of your motorcycle or ATV, keeping your ride running in peak condition.
( 2 )
$10.99
—
$17.99
On Sale
EBC offers Keihin-style pilot jets for a variety of ATV and UTV applications. These brass carburetor replacement jets are available in multiple sizes to accommodate most off-road machines.
Not Yet Reviewed
$18.93
$17.04
Find the exact cable fittings that you desire for your machine from Motion Pro. Their brass cable fittings have gold iridited finishes and are available in different sizes and styles to replace, repair, and fit your custom fabrication needs. Get going and stay moving with the specialists at Motion Pro.
Not Yet Reviewed
$19.79
—
$21.99
Tune your 2-barrel with Edelbrock 94 carburetor jets. Available in several sizes to tweak your carb to perfection, these brass 94 jets will also fit original Holley 94s. Keep the nostalgia flowing with proper jetting from Edelbrock.
Not Yet Reviewed
$15.95
These Mikuni 7 Series carburetor needles are high-precision and calibrated for an extremely accurate fuel flow rate. They are manufactured from brass for a long and reliable life. Mikuni 7 Series needles can help to improve the performance of your motorcycle or ATV, keeping your ride running in peak condition.
Not Yet Reviewed
$10.99
Clearance
These Mikuni 5 Series carburetor needles are high-precision and calibrated for an extremely accurate fuel flow rate. They are manufactured from brass for a long and reliable life. Mikuni 5 Series needles can help to improve the performance of your motorcycle or ATV, keeping your ride running in peak condition.
Not Yet Reviewed
$10.99
When you are rebuilding your carburetor, use Mikuni direct replacement parts as your foundation. Mikuni main jet rings are made of brass and are the replacement pieces that will keep your carburetor running like new. When you are ready for a rebuild, do it with Mikuni main jet rings.
Not Yet Reviewed
$16.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
