Availability
Showing In Stock Items. Show All 64 Items.
On Sale
Holley offers their accelerator pump diaphragms for all of their carburetors. These quality pieces ensure that the job is done right and help to keep your carb functioning like new.
( 119 )
$15.88
$14.29
On Sale
Holley fuel bowl gaskets are designed to replace your standard fuel bowl gaskets. They transform jet changing into an easy process with no worries of ripped gaskets.
( 90 )
$15.88
$14.29
On Sale
Holley replacement power valves are an important component in the power enrichment circuit of Holley's performance carburetors. They operate by using engine vacuum to control their opening and closing rate. When they open, additional fuel is supplied to the main system during heavy load or under full power situations to eliminate hesitation and bogging--ensuring the smooth delivery of power without any drivability concerns. They're available in many different vacuum ranges to time the system's operation to your specific requirements, and they come in your choice of single-stage, two-stage, and high-flow designs. A gasket is included.
( 131 )
$15.88
—
$19.60
$14.29
—
$17.64
On Sale
Replace your worn or missing throttle studs with the Holley recommended carburetor throttle lever studs.
( 104 )
$13.03
—
$21.57
$11.73
—
$19.41
On Sale
Restore the performance of your high-mileage fuel pressure regulator with these genuine Holley diaphragm repair kits. You'll regain the accuracy and performance of the regulator from when it was new.
( 65 )
$11.85
$10.67
On Sale
Holley vacuum secondary diaphragms will replace your existing worn-out diaphragms. They are made from a high performance rubber material and will fit most Holley carburetors with vacuum secondaries.
( 49 )
$18.99
$17.09
On Sale
Holley Sniper EFI throttle lever extensions bolt directly onto your current throttle lever, increasing the mechanical advantage of your throttle cable, or rod. This results in a significantly decreased pedal effort, and smoother pedal feel, especially at low throttle input, such as when you are leaving a stoplight. They are ideal if a stiffer throttle pedal is noticed after an EFI conversion. Features: * Direct bolt-on installation * Hardware included * Decreases pedal effort for smoother driving characteristics * Corrects poor throttle cable/rod geometry
( 64 )
$19.97
$17.97
On Sale
FASS Fuel Systems replacement fuel filters offer premium diesel fuel filtration for your rig. When your fuel system runs clean, it's more efficient and powerful. FASS offers replacement filters to fit their HD, Titanium, and Platinum series systems. Remove contaminants and feed your diesel engine purified fuel through FASS replacement fuel filters, available in a variety of sizes and microns filtered.
( 12 )
$20.90
$18.81
On Sale
Holley kickdown spring and bracket sets adapt your Holley carburetor for use with your Ford automatic transmission. The brackets have one mounting hole and one locator pin. They're designed for carburetors with a 30cc accelerator pump.
( 39 )
$17.78
$16.00
On Sale
These Quick Fuel throttle ball assortment kits are designed to help you get your carburetor connected properly. They include a variety of sizes and styles of throttle balls, so you can choose what's best for your carburetor and throttle linkage assembly.
( 12 )
$16.50
$14.85
On Sale
Holley carburetor accelerator pump check valves are made to fit most Holleys using a 30cc or 50cc accelerator pump. They feature the "umbrella" design most commonly used in performance-style carburetors.
( 10 )
$18.99
$17.09
On Sale
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetor metering block gaskets are available for a variety of Holley carburetors with and without intermediate systems. These gaskets ensure a good, leak-free seal between your carburetor body and metering blocks. Holley can give you the edge you need over the competition!
( 26 )
$16.61
$14.95
On Sale
Holley carburetor float kits work with side-hung and center-hung Demon and aftermarket Holley carburetor floats, as well as many OE Holley, Ford, Chrysler, GM, Motorcraft, AMC, and Rochester marine carburetors. Offered in brass and Nitrophyl for internally and externally adjustable floats, they're available as primary floats, secondary floats, and secondary floats with notches that include jet extensions. Holley's wedged floats feature a reinforced float bracket assembly that allows more fuel to flow through the bracket—especially when using bottom-feed needles and seats. Technical notes for Holley carburetor float kits: * Wedged floats are designed for oval track use, so the float stays open in turns * The use of brass floats on the secondary side of Model 4160 carburetors factory-equipped with Nitrophyl floats may result in loss of fuel control and flooding if the floats contact the metering plate * You should only install jet extensions and notched floats in rear fuel bowls
( 108 )
$20.17
—
$20.32
$18.15
—
$18.29
On Sale
Upgrade your carburetor's hardware for maximum performance with the help of Holley. Their needle and seat hardware kits work with all Holley carbs with an adjustable needle and seat. Also keeping style in mind, these kits are offered in gold or black. Kits include adjusting nut, lock screw, gaskets, and O-ring.
( 20 )
$11.40
$10.26
On Sale
Holley standard main jets are just what you need to fine-tune your carburetor for street or race performance. Threaded for easy installation and removal, they manufacture these brass jets to high tolerances for consistency. They're available in dozens of jet and jet drill sizes for precise fitment on countless gasoline-fueled vehicles. When considering replacement parts for your carburetor, trust the expertise of Holley.
( 199 )
$13.95
—
$14.33
$12.56
—
$12.90
On Sale
Direct from Holley come these throttle lever extensions. They are designed to help relocate the throttle lever mounting point for the accelerator cable and readily accept most throttle lever studs for a simple and convenient throttle hookup.
( 25 )
$17.76
$15.98
On Sale
Holley transmission kickdown lever extensions are handy parts used to extend the lower Ford OEM transmission kickdown lever when converting from a 2 barrel to a 4 barrel carburetor or as an effective mounting point for a transmission kickdown.
( 24 )
$12.66
$11.39
On Sale
Now you can look and see the condition of your fuel with these Clear View fuel filters from Mr. Gasket. They feature chrome plated ends that are barbed for positive fuel line retention. You'll know when your fuel filter is flowing fine with your Clear View Fuel Filters from Mr. Gasket.
( 68 )
$17.23
—
$18.95
$11.20
—
$12.32
On Sale
These Quick Fuel FOUR DOOR power valves feature an exclusive in-house design that has become the preference of professional race teams in virtually every circuit where carburetors are used. They have a greater flow capacity, a quicker response rate, and tighter limit bands that allow engine builders to precisely tune the power enrichment phase of their calibration. All Quick Fuel FOUR DOOR power valves are hand-tested and set to the stamped value. Their thicker molded diaphragm adds increased protection against backfire-induced rupture.
( 51 )
$13.97
$12.57
On Sale
Holley HP billet fuel filter replacement elements are for use with your Holley HP billet fuel filter. They're available in your choice of a 10-micron depth media element or 40-micron and 100-micron stainless steel woven mesh elements. Ensure that your fuel filter is preventing contaminants from entering the engine. Update your old unit with a quality replacement element from Holley.
( 13 )
$23.79
$15.46
On Sale
Quick Fuel needle and seat assemblies achieve the highest flow rates possible. The inlet doors exactly match the adjustment nut flats to align with the fuel bowl's inlet passage. Perfect alignment of the inlet door and this passage ensures optimum fuel flow. The large stem base on the needle provides for a more accurate response to movement of the float arm.
( 25 )
$19.04
$17.14
On Sale
These fuel pump block-off plates cover the opening left when you convert from a mechanical to an electric fuel pump. They're made from precision-cut steel that's highly polished and chrome plated. Gaskets are included.
( 28 )
$13.99
—
$18.86
$12.26
—
$12.59
On Sale
These fuel pump mounting plates mount behind your mechanical fuel pump for carbureted small block Chevy V8 and 90 degree V6 engines. They add a touch of shine to the area behind your fuel pump, and even come with a gasket.
( 10 )
$18.31
$16.48
On Sale
These paper elements are direct replacements for your Mr. Gasket air cleaner. They will last longer than the filters you can get at the local shop, and they are guaranteed to fit your Mr. Gasket assembly.
( 44 )
$13.74
—
$21.36
$12.37
—
$13.88
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
