Selected Filters


Loading...

Availability


RAM Air & Fuel Delivery

Not Showing Customizable Items. View Customizable Items.

Part Groups

Results 1 - 24 of 258

Fleece Performance Cheetah FMW Turbochargers

Amplify your driving experience with a Fleece Performance Cheetah turbocharger. Featuring a Fleece exclusive 63mm FMW compressor wheel and a high-flow turbine wheel, these turbos are capable of supporting up to 650 rear wheel horsepower without sacrificing any drivability. These drop-in replacements offer smooth and quick throttle response with big top-end power. Whether you're towing, racing, sled pulling, or just driving to work, the Cheetah will get the job done. Order the model recommended for your truck.

3.0 out of 5 stars ( 2 )

$3,099.99

Banks Power Monster-Ram Intake and Killer Grid Heater Upgrades

The Banks Power Monster-Ram Intake and Killer Grid Heater Upgrades significantly improve 6.7L Cummins performance by increasing airflow by over 122 percent compared to stock, leading to faster throttle response, higher boost, and improved fuel efficiency. They're designed to eliminate the restrictive, failure-prone stock heater to prevent catastrophic engine damage, offering a superior, high-flow, 50-state emissions-compliant solution. This monster upgrade is designed for 2007.5-2024 Dodge Ram 6.7L Diesel engines to maximize performance, efficiency, and durability. Key benefits of the Banks Power Monster-Ram and Grid Heater Upgrade: * Massive airflow increase—the Monster-Ram system flows 936 cfm, a substantial increase over the stock 421 cfm, allowing for better engine efficiency and power * Eliminates engine failure risk—replaces the stock grid heater, which is notorious for breaking off and causing catastrophic engine damage (often costing up to $30,000 to repair) * Provides quicker throttle response and higher boost pressure without increasing turbine drive pressure * The high-flow coil heater ensures reliable cold-weather starts, preventing the carbon build-up common in stock units * As the only 50-state emissions-compliant RAM intake elbow, it ensures legality while improving performance * Superior design—features a 3 3/8-inch inlet and four 1/8-inch NPT ports for accessories, maximizing air density and distribution

4.91 out of 5 stars ( 33 )

$678.87

—

$898.99

BD Diesel Killer Grid Heater Upgrade Kits

BD Diesel Killer grid heater upgrade kits are purpose-built to address a major flaw in the 6.7L Cummins engine--the electrical connection to the intake grid heater. When powering the grid heater, 200 amps pass through a small bolt and nut inside the intake and over time is known to deteriorate and eventually arc and break off. The nut drops into the engine, leading to extensive damage to the piston, head, and valves. BD's Killer kits upgrade that flawed electrical circuit by eliminating the problematic bolt and nut inside the intake while retaining stock functionality of the heater. The kits are cost-effective and easy to install. Additional features: * Allows for full heat output with the stock intake grid heater * Fully emissions compliant * No modifications or tuning required * Self-locking threads built into the lower busbar prevent backing out and compromising electrical connection * Kit includes replacement hardware and gaskets, along with special tools required for the job

4.9 out of 5 stars ( 10 )

$219.99

S&B Filters Cotton Filter Cold Air Intake Kits

S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow, S&B oiled cotton filters are built with four layers (or eight for diesels) of the highest-quality cotton gauze. They use deeper, wider pleats with more per filter. Plus, their manufacturing process yields almost no "bleed", creating a greater open surface area. All of this adds up to more airflow with excellent protection. The filter elements are washable, reusable, and will protect your engine from harmful dirt and debris. Gain performance and a sporty, high-tech appearance under the hood of your rig with an assist from the S&B Filters cotton filter cold air intake kit best suited for your application. More product features, items, and specifications include: * Silicone rubber (not urethane) filters and couplers help ensure they won't degrade or crack, while resisting temperatures as high as 400 degrees F * Helps balance air/fuel ratios to improve gas mileage * Cross-linked intake tube minimizes restriction * Custom air box (where applicable, including some with clear lids) keeps loose dirt and turbulent underhood air out of your intake * Specific year, make, and model design makes them simple to install, with help from the easy-to-use installation instructions and illustrations * Included mounting hardware for replacing your stock assembly in 30 minutes or less in most cases

4.69 out of 5 stars ( 480 )

$399.99

BluePrint Engines EFI Fabricated Intake Manifolds

BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders

3.0 out of 5 stars ( 1 )

$599.99

Fleece Performance Cheetah Holset VGT Turbochargers

Fleece Performance Cheetah Holset VGT turbochargers will lower EGT's, supply top-end power, and provide quick and tight throttle response. They don't require an installation kit; however aftermarket off-road tuning and free-flowing exhaust are required. These drop-in replacement turbochargers have 63mm billet compressor wheels, a high-flow turbine wheel, and can support 650 rwhp. They provide spooling similar to stock and an operating range of 40 to 45 psi. When on the prowl, having fun, working for your meal, or racing others, enjoy the spirit of your turbo's namesake—Fleece Performance Cheetah Holset VGT turbochargers.

5.0 out of 5 stars ( 2 )

$3,099.99

Fleece Performance Intake and Grid Heater Upgrade Kits

Upgrade reliability and airflow with Fleece Performance intake and grid heater upgrade kits, engineered to eliminate the risk associated with OE-style grid heater nut failures while improving overall intake efficiency and throttle response. Featuring a precision-machined cast aluminum high-flow intake horn and intake plate, this complete kit replaces the factory grid heater with a durable coil-style heating element that reduces restriction without sacrificing cold-weather performance. Designed for a factory-style fit and finish, the kit includes all required hardware, gaskets, wiring, and cables for a straightforward installation, while retaining compatibility with OE or direct-replacement fuel lines. For drivers in extreme climates, an optional dual-heater configuration delivers proven cold-start capability in temperatures as low as -35 degrees C, providing confidence, protection, and performance in any season.

Not Yet Reviewed

$599.99

K&N 50 Series NextGen Cold Air Intake Kits

The "next generation of air intake technology" K&N 50 Series NextGen cold air intake kits are precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow. Every detail of the intake system is thoughtfully designed to deliver performance, plus make the installation process DIY-friendly. NextGen cold air intakes are dyno-tested to provide a guaranteed increase in horsepower and torque on your engine's stock tune, and they are back by K&N's 55+ years of engine protection. Enjoy the roar of your engine on acceleration without any drone at cruising speeds; select the K&N 50 Series NextGen cold air intake kit designed for your vehicle. NextGen CAI details: * High-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow to your engine and provides an increase in horsepower and torque with no tune required * Custom NextGen hybrid air box design incorporates an enlarged factory fresh air inlet for more airflow and lower inlet air temperatures * Easy-view open top for quick filter access * Oversized performance high-flow air filter, washable and reuseable, provides added surface area to flow more air and hold more dirt * Quick Lock air filter technology allows the filter to snap into place, and a sealing bead secures the system with just one hose clamp * CAD-designed large diameter tube with integrated airflow channels force an increase in velocity of air into your engine

3.95 out of 5 stars ( 20 )

$361.92

—

$469.99

FASS Fuel Systems Titanium Signature Series Fuel/Air Separation Systems

FASS Fuel Systems Titanium Signature Series fuel/air separation systems are a beneficial upgrade for your diesel engine. Titanium systems feature compact designs, powerful motors for improved fuel flow, and advanced filtration that's far superior to your factory fuel filter. Their diesel fuel lift pumps are engineered to be top performing, reliable, long-lasting units—and are backed by a limited lifetime warranty on all light-duty diesel applications. The Signature Series also features FASS revolutionary Whisper Technology that effectively and drastically reduces the sound levels of these diesel systems to a "whisper," while at the same time increasing fuel flow rates. Whether stock or highly modified, FASS Titanium Signature Series diesel fuel systems are available to handle your engine's horsepower. Features and benefits: * Systems available with flow rates up to 290 gph * Advanced filtration removes water, air, vapor, and debris with a filtration rating of 2 micron * Smoother engine idle * Protects and extends the life of your injectors * Whisper Technology (FWT)—reduces noise levels without reducing flow rates * Performance Radius Cuts (PRC)—advanced machining technique creates smooth cuts within aluminum housing * Improved fuel volume delivery * Mass Flow Return (MFR)—technology used to continually "polish" your fuel by keeping positive pressure on fuel being delivered to your engine, guaranteeing the cleanest fuel possible. Also prevents cavitation, along with galling and scoring. * Improved cold weather starts * Decreases carbon monoxide and carbon dioxide emissions * Easier bolt-on bracket mounts do not require any drilling or welding to mount new pump * 1/2 in. fuel lines and ports * Fuel mileage improvement * 30,000 mile filter life expectancy

4.66 out of 5 stars ( 62 )

$724.00

—

$754.00

Mopar Replacement Fuel Injectors

Mopar Replacement fuel injectors are authentic OE-quality repair parts that will provide your ride with top-notch performance by replacing faulty ones. And, since these direct-fit fuel injectors are original equipment parts, they offer a hassle-free installation. Feed your engine with precise, consistent sprays of atomized fuel with these fuel injectors from Mopar Replacement.

5.0 out of 5 stars ( 5 )

$46.99

—

$168.99

S&B Filters Dry Filter Cold Air Intake Kits

Have you always wanted a cold air intake with a disposable filter--without sacrificing performance? S&B Filters dry filter cold air intake kits offer airflow comparable to their cotton filters with the same great protection. They typically last for 15,000 miles of highway driving and you can extend the life of the filter by blowing it out with compressed air (up to three times). Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes … and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits. Features include: * Helps balance air/fuel ratios to improve gas mileage * Specially-crafted cross-linked intake tube minimizes restriction * Custom air box keeps loose dirt and turbulent underhood air out of your intake * Custom-made for your specific year, make, and model * Easy-to-use installation instructions and illustrations * With the included mounting hardware, replaces your stock tract in 30 minutes or less

4.64 out of 5 stars ( 75 )

$399.99

S&B Filters Dry Cleanable Replacement Filters

S&B offers dry cleanable replacement filters for their cold air kits. The massive, highly-efficient air filters result in better performance while also protecting your engine. The 8-layer dry synthetic media trap dirt, dust, and debris before they can damage key components. These filters feature a black powdercoated steel cage for added protection. Feed your engine massive amounts of airflow, courtesy of an S&B replacement filter. Order the model recommended for your truck and engine application.

4.93 out of 5 stars ( 42 )

$69.99

BD Diesel Screamer Turbochargers

BD Diesel Screamer turbochargers may offer a stock drop-in installation and appearance, but they are anything but stock! They feature a larger ballistic billet compressor wheel and BD's exclusive turbine profile that results in reduced backpressure and increased turbine flow compared to the competition. You get more potential maximum power output, right up to 690 hp with performance modifications. Each turbocharger is high-speed balanced with the actuator stroke tested prior to shipping.

3.0 out of 5 stars ( 2 )

$2,998.99

Banks Power Ram-Air Intake Systems

Banks Power knows that sometimes it's good to be dense. Cold air is denser air, and more density equals more performance. Enter the Ram-Air intake systems—the proven cold air intakes. Banks designed these systems to flow larger amounts of cold, dense air to your engine for greater power and fuel economy. Ram-Air units are enclosed to keep hot, power-robbing engine air out, while they inhale big gulps of fresh air through large, unrestrictive components to feed your hungry engine's appetite. And, no matter if you own a diesel or gas pickup, gas motorhome, or even a Jeep, these systems will keep your engine happy and efficient. Performance stems from more than just airflow—density is the key performer. Order the Banks Ram-Air intake system tailored to your vehicle application.

4.69 out of 5 stars ( 62 )

$435.53

—

$469.00

Fleece Performance PowerFlo In-Tank Lift Pump Assemblies

PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.

5.0 out of 5 stars ( 10 )

$696.82

—

$799.99

VaraRam VR Air Grabber Ram Air Induction Systems

VaraRam VR Air Grabber Ram Air induction systems are designed to draw in air from the high-pressure zone between the upper core support and the underside of the hood. They feature a high mount location with water drains to ensure that mud or even water over 2 ft. deep will not create any issues. They are true forced induction systems that are intercooled and will help you gain up to 30 hp and 30 lb.-ft. of torque without any tuning. They are guaranteed to improve your quarter-mile times, as well as your 0-60 time. So, if you're looking for an extra boost in power and want to create a look that screams pure MOPAR power, these VaraRam VR Air Grabber Ram Air induction systems are just the thing for you!

4.24 out of 5 stars ( 17 )

$426.99

BTR Throttle Bodies

Brian Tooley Racing offers throttle bodies for hundreds of applications, including many Cadillac, Chevrolet, GMC, Hummer, Saab, Chrysler, Dodge, Jeep, and RAM cars, trucks, and vans from 2009 and up. These high performance, aftermarket units are designed to increase airflow, reduce turbulence, and improve throttle response for engines like the GM LS/LT and Gen III Hemi. They feature durable cast aluminum construction and are available in various for both naturally aspirated and boosted applications. Order the BTR model recommended for your vehicle.

Not Yet Reviewed

$169.99

BD Diesel Screamer Turbocharger Manifold Packages

BD Diesel Screamer turbocharger/manifold packages look stock and install like stock, but is anything but stock! Screamer features a larger ballistic billet compressor wheel and BD's exclusive Low MOI QST turbine wheel, resulting in reduced backpressure, quicker response, increased efficiency, and increased turbine flow compared to the competition. The outcome is increased maximum potential power output, right up to 690 hp with supporting modifications. No extra parts to install, just drop-in and enjoy the extra power potential. BD's Screamer turbocharger is perfectly paired with a pulse manifold made from high-silicon ductile iron and designed to withstand extreme temperatures and vibration. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases manifold longevity. Order the package designed for your truck. Key turbo features: * Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel * QST turbine wheel has a 15 percent reduction in MOI (moment of inertia) which results in quicker turbo response * QST turbine blade thickness decreased by 25 percent allowing for higher turbine gas flow and increased efficiency * Each actuator is calibrated and tested prior to shipping * VSR high-speed balanced Manifold features: * Thick-wall casting resists high-heat cracking and leaks for long-term durability * Full EGR compatibility for easy fitment

Not Yet Reviewed

$3,766.99

DeatschWerks Fuel Injectors

DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.

4.71 out of 5 stars ( 75 )

$439.99

—

$1,589.99

BTR Trinity Series Intake Manifolds

The Trinity Series intake manifolds is BTR's latest offering in high-quality cast aluminum intake manifolds for LS7 engines. Their short runner, 3-piece design allows for the ultimate in application flexibility and is similar in concept to billet intakes costing thousands more. Optimum operating range is 6000-8500 rpm and is primarily intended to bridge the gap between N/A and Boosted applications. These intake manifolds utilize the high LT1 throttle body position and accepts DBW or cabled throttle bodies, yet will fit in the tight confines of the C7, C6, C5 Corvette, as well as the popular F-body platforms. BTR Trinity Series intake manifolds come semi-assembled and includes all hardware required to bolt it on. Additional features: * Available in choice of silver or black satin texture powdercoat finishes * Design incorporates two runners and an interchangeable plenum * Both the port mouth radius and the port match are CNC-machined * Seal is generated by eight entrapped O-rings at the runner/plenum interface and is clamped by M6 stainless steel socket head cap screws * Port seals are achieved SAE O-rings seated in a dovetailed O-ring groove * Incorporates two ports on the side of the throttle body boss and on the rear * Runners and plenums can be purchased separately

4.67 out of 5 stars ( 3 )

$874.99

—

$1,074.99

Fleece Performance S400 Intercooler Adapters

When installing a Fleece Performance S400 turbo with intercooler, you're going to need the proper adapters. These 90-degree discharge adapters include a clamp and O-ring to ensure you get the proper seal. Don't lose out on performance!

5.0 out of 5 stars ( 1 )

$60.99

On Sale

FASS Fuel Systems No-Drop Series Diesel Fuel System Kits

Installing a Titanium Signature Series fuel system has never been easier, or more affordable. Designed to simplify installation, FASS's No-Drop Series diesel fuel system kits include their fuel sump, which prevents the need for removing your fuel tank. Better still, these No-Drop kits offer significant savings over buying a Titanium Signature Series fuel system and sump kit separately! They include everything you need for a simple, straightforward FASS installation--and nothing you don't. Select the kit designed for your diesel truck. No-Drop kit benefits: * Increases fuel lubricity at least 10 percent * Can increase 3 times the life of injection components * Removes over 99 percent of the water from fuel * Eliminates entrained air and vapor * Filters out debris down to 2 microns absolute * Provides far more fuel flow than OEM * Drastically simplifies installation

Not Yet Reviewed

$849.99


$823.53

Bosch Fuel Pressure Regulators

Bosch fuel pressure regulators are designed to maintain proper fuel pressure on your fuel injected engine. They are available in different styles and will fit your EFI system without any modifications. Keep your engine happy with one of these Bosch fuel pressure regulators.

5.0 out of 5 stars ( 22 )

$174.99

ICT Billet High-Flow Intake Plenum Plates

ICT Billet high-flow intake plenum plates are cut from heavy-duty aerospace-grade billet aluminum. Most are 1/2 in. thick and are machined on the back side for increased plenum flow. Choose ICT Billet high-flow intake plenum plates for your engine upgrade.

5.0 out of 5 stars ( 3 )

$112.99