Availability
Showing In Stock Items. Show All 28 Items.
Summit Bucks
ACDelco GM Genuine Parts fuel injectors are an electro-magnetic valve that meters fuel into the engine's intake manifold or cylinders for combustion, and is a GM-recommended replacement for your vehicle's original component. The engine management computer operates the injector by applying an electric current to the injector solenoid winding—this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. They are also offered in kits with the necessary parts, such as seals, clamps, and spacer.
( 6 )
$69.99
Summit Bucks
ACDelco GM Genuine Parts throttle bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. The throttle bodies are located on the intake manifold and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) Systems. Some of the key benefits that these throttle body components provide are better throttle response, increased airflow, and improved high rpm performance.
( 1 )
$144.99
Granatelli Motor Sports is proud to offer a variety of performance throttle bodies for late model, drive-by-wire engines. Their throttle bodies are precision-machined to exceed the demands required for increased airflow on high performance applications, both naturally aspirated and forced induction. These upgraded throttle bodies can be used with factory or aftermarket manifolds and utilize the OEM harness connector. The increased size also allows for smoother and quicker engine acceleration--and there's no need to transfer anything over from the factory unit. Proper tuning is highly recommended after installation. Granatelli throttle bodies are available for hundreds of vehicles from the 1990s and up.
( 10 )
$144.64
—
$862.84
Nick Williams Performance drive-by-wire throttle bodies are precision CNC-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX and LTX performance engines. These throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installed. There is no need to disassemble your factory throttle body. Order the model designed for your vehicle and engine application.
( 21 )
$899.99
—
$924.99
Why settle for a factory ECU with a cumbersome tuning interface when you can have complete control of your engine, self-learning fuel strategies, and the proven, race-winning technology of Holley EFI at a budget-friendly price? With Holley's Terminator X GM GDI controllers, you can take control of your GM Gen V LT4, LT1, L83, or L86 engine. They feature real-time fuel learn, an integrated 1bar MAP sensor, and four programmable inputs and outputs that are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Whether you're building an LT-swapped budget beater or a boosted racecar, Holley EFI Terminator X GM GDI controllers have the features and technology you need at a price that won't break the bank. Features and notes: * Terminator X comes fully loaded with base maps for common LT engine combinations * 3.5 in. touch screen LCD handheld: -- Easy-to-use calibration wizard -- Tuning and gauge display functions * External gasoline direct injection controller, enables control and tune of factory injectors, GM Gen V LT Variable Valve Timing (VVT), and factory fuel pumps * Holley EFI industry-leading, easy-to-use software suite that allows full laptop access for advanced users * Plug-and-play GM Gen V LT engine GDI and VVT controller--ONLY compatible with Terminator X or X MAX ECUs. Note: To identify if your engine is an early or late application, refer to your fuel pressure sensor, located behind the intake manifold. Early sensors have a 4-pin connector, whereas late sensors have a 3-pin connector. This will help you pick which kit you require for your engine.
Not Yet Reviewed
$999.95
Advanced Fuel Dynamics PROFLEX Direct flex fuel systems equip your GM vehicle to start making more power. The installation is simple, and with an easy unlock tune your vehicle can start running high performing E85 or any blend of E85 and gas. If you're still running on gas, you're running behind. Advanced Fuel Dynamics PROFLEX Direct flex fuel systems offer full, true flex fuel capabilities and better performance for your GM vehicle.
( 6 )
$259.00
ICT Billet throttle body extension harnesses are assembled with OEM tooling, OEM Delphi components (connector, lock, seals, and terminals), and OEM harness wire colors. Don't take a chance with cheap wire connectors; poor quality materials can have conductivity issues that will cause your engine to run poorly and be difficult to diagnose. ICT Billet throttle body extension harnesses provide quality you can trust. Order the model recommended for your application.
( 1 )
$78.99
ICT Billet "dummy" fuel injector plugs are available for LT1, LT4, L82, L83, L84, L86, L87, and L8B engines. The "dummy" fuel injector plugs are made from aerospace-grade billet aluminum, matching the similar external size and shape of OEM injector. They are primarily used for filling the holes in the combustion chamber where the factory injectors would normally be and also when converting to direct port fuel injection. ICT Billet "dummy" fuel injector plugs include eight mock injectors, retainer bars, and pre-installed O-rings for one complete 8-cylinder engine installation. Order the proper ICT Billet "dummy" fuel injector plug set designed for your specific engine setup.
Not Yet Reviewed
$203.99
Get connected with ICT Billet throttle body adapters. These adapter plates are offered for several different applications and are all made from aerospace-grade billet aluminum. Adapter plates are available in a variety of straight and tapered through-hole diameters.
( 30 )
$72.99
Summit Bucks
ACDelco GM Genuine Parts engine intake manifold covers are designed, engineered, and tested to rigorous standards—and are backed by General Motors. Made to fit your specific GM vehicle, these replacement air intake components are crafted from the highest-grade materials for correct fit, and dependable, long-lasting service. Make sure your engine breathes properly with ACDelco's selection of top-quality replacement air intake parts.
( 2 )
$177.99
On Sale
Attach your throttle cable to your LS engine with one of these MSD Atomic AirForce intake manifold throttle cable brackets. They're manufactured from quality materials and are designed to bolt directly to the MSD Atomic AirForce intake manifold. The brackets include stainless steel mounting hardware to complete the installation.
( 3 )
$59.25
$32.59
—
$79.09
On Sale
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 110 )
$389.96
$350.96
For drivers, determining actual ethanol content of E85 is essential to maximizing ignition timing, higher compression, and horsepower. Chevrolet Performance flex fuel sensor harnesses connect your GM sensor, which measures the ethanol-gasoline composition of the fuel used in your flexible fuel vehicle. In order to adjust the ignition timing and the fuel quantity to be injected, the engine management system requires the percentage of ethanol in the fuel. These electrical harnesses support a signal circuit which carries the ethanol percentage and changes the output signal accordingly.
( 1 )
$23.99
Clearance
Airaid's PowerAid TBS concept was developed to enhance midrange power, torque, and fuel efficiency. The unique dyno-proven Helix Bore design of the Poweraid throttle body spacers causes a spinning action of the incoming air-charge as it passes through the throttle body. This extremely beneficial air-charge carries all the way into the combustion chamber, producing a super-atomized mixture, which creates tremendous gains in midrange power and overall efficiency—the key element to horsepower success. The aluminum spacers are available in different thicknesses and finishes. Order the kit recommended for your vehicle.
( 299 )
$125.99
ICT Billet fuel rail block-off plates are designed to replace direct injection fuel rails, commonly used when switching to port injection. They are made from aerospace grade billet aluminum and are compatible with all V8 GM LT Series engines 2014 and newer. These fuel rail block-off plates can be used with a stock valley cover or ICT valley pan (551168 and 551171 models) and include two plates, along with the correct mounting hardware.
Not Yet Reviewed
$58.99
On Sale
MSD Atomic EFI billet fuel rails are the perfect complement for your Atomic AirForce intake manifold. Whether you're looking for just rails, or complete kits with all the necessary plumbing--these fuel rails will have you looking for any excuse to pop the hood. They feature a bright dip, black anodized finish with laser-etched logos and a 5/8 in. diameter fuel passage flow capacity for high-horsepower applications. Make your engine look as good as it performs with MSD Atomic EFI fuel rails. Features, specs, and parts may include: * Fuel rails are machined to accept large -8 (3/4 in.-16) O-ring fittings * Includes mounting brackets and hardware * Includes four -6 to 3/4 in.-16 O-ring adapters
( 1 )
$249.95
—
$338.95
$137.95
—
$186.95
On Sale
Holley throttle body angle adapters resolve problems. The considerable angle of the LT intakes can cause issues routing inlet plumbing and clearance to aftermarket accessory brackets. These adapters level the throttle body for swap applications without changing the flow the GM design intended. Other four-bolt intakes with routing issues can also benefit from this adapter. Features and benefits of Holley throttle body angle adapters: * Billet aluminum construction * Maintains proper throttle body blade orientation * Eliminates drivability issues associated with inverting the throttle body * Allows clearance to aftermarket accessory brackets or other clearance and routing issues * No harness rerouting or extending required * Works with both truck and car LT intake bolt patterns * Works with all 4-bolt LS intake bolt patterns * Works with up to 95mm intakes and throttle body openings * Works with common LS and LT 104 x 70mm bolt pattern throttle bodies * Adapts common LS 104 x 70mm bolt pattern throttle bodies to LT 5.3L truck intakes * Works with Holley 92/95mm Hi-Ram and Mid-Ram intakes * Allows use of cable-operated and other throttle bodies on Gen V 5.3L intakes
( 5 )
$109.95
aFe Power offers throttle bodies for a variety of applications, including many Toyota vehicles from 2003 and up. Product details (model 46-39103): * Brand new 76mm throttle body * No tuning required * Plug-n-play electronics * Billet aluminum adapter * More power and better throttle response * Hardware and gasket included * Direct bolt-on for simple installation * Larger bore throttle body: This aFe Power 76mm throttle body and adapter kit improves engine airflow over the stock 65mm throttle body. The extra airflow will increase horsepower and throttle response. This kit will work with OEM or aFe cold air intakes. Performance gains will be more noticeable as more upgrades are added to the vehicle. *6061-T6 billet aluminum adapter: All adapters are constructed from 6061-T6 billet aluminum and are precision-machined for light weight, high strength, and perfect fit and finish. The serrated/swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel, creating a more complete combustion cycle—increasing horsepower, torque, and improving throttle response. * Simple installation: Throttle body kit uses all factory mounting locations, providing stability and a hassle-free installation. All needed hardware is included with the kit. * Installation note: Idle will run high on some vehicles but will readjust once the ECU learns to properly control the idle (this can take up to 800 miles on some vehicles).
Not Yet Reviewed
$414.75
Snow Performance water-methanol injection plates are the easiest way to mount the Snow water-meth nozzles on your throttle body. Simply fit this spacer between the throttle body and intake manifold—and enjoy custom placement of two 1/8 in. NPT ports. Each anodized billet aluminum plate features O-rings on both sides, eliminating the need to seal your throttle body with silicone.
( 2 )
$119.78
Upgrade your air intake system with throttle body adapters from Granatelli Motor Sports to provide a smooth transition from the throttle body to the intake manifold for trouble-free operation. The adapters are precision machined from billet aluminum and include hardware to bolt adapter plate to the intake. Order the throttle body adapter designed for your application.
Not Yet Reviewed
$224.44
On Sale
Holley EFI throttle body adapters are offered individually allowing you to select your components as you build your intake system. They work with a wide range of intake configurations and come in different sizes depending on your throttle body. Simplify the process of getting your intake system set up with Holley EFI throttle body adapters.
( 1 )
$199.95
—
$228.95
Clearance
Astemo offers electric fuel injection throttle bodies for a wide range of cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. A throttle body is a butterfly valve located between the air intake filter and the intake manifold. It regulates how much air can go into the engine, based on driver input through the gas pedal. As more air flows into the engine, it injects more fuel, thus allowing for more power. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the multi-port injection throttle body recommended for your vehicle.
( 5 )
$164.99
—
$231.99
Clearance
Performance Design billet fuel rails will allow you to complete your fuel system without having to source your own fuel rail and confirm fitment. The fuel rails come with stainless steel mounting and are available in red or black anodized finishes. While these kits do include stainless steel mounting hardware, port fittings to feed or plug the rail ends will have to be sourced due to the variety of available customizations. You can forget about fitment issues with the Performance Design billet fuel rails when you order the model designed to fit your intake manifold. Select the application needed.
Not Yet Reviewed
$239.99
$176.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
