Availability
Tanks Inc. universal fuel line kits include 25 ft. of line and all or most of the fittings that you need to plumb your fuel system when using a Tanks Inc. fuel pump. The kits will give you all the fittings needed to plumb a FI-Tech system and most fittings to plumb systems that use an external fuel regulator, such as MSD Atomic, Holley Terminator, or FAST EZ-EFI. Tanks Inc. universal fuel line kits include: * Fuel filter * Two quick-disconnect fittings for fuel filter * Two 1/4 in. NPT to -6 AN fuel pump adapter fittings * Six -6 AN straight Twist-Lok fittings * 25 ft. -6 AN black Twist-Lok fuel hose
( 19 )
$293.99
The single fuel tank line kits for GM LS from Tanks Inc. includes 25 ft. of line and all the fittings that you need for your LS engine swap using one fuel pump and one tank. The kits are designed for LS engines that have a single fuel inlet fitting. Kit includes: * Fuel filter/fuel regulators * In-Line check valve * (2) 1/4 in. NPT to -6AN adapter fitting (fuel pump pickup and return line fittings) * (6) Russel straight -6AN straight Twist-Lok fittings * Russell 3/8 in. Male Quick Disconnect to -6AN Male fittings—fuel feed from regulator to engine fitting * Russell 3/8 in. Female Quick Disconnect to -6AN Male fittings—fuel regulator feed from pump and fuel rail fitting * 25 ft. of -6AN black push lock fuel hose
Not Yet Reviewed
$199.99
Tank Inc. inline fuel pumps are genuine Walbro models. Product details for model GSL392: * 255 lph pump is good for up to 600 hp at 60 psi * External inline fuel pump * 10mm X 1.0 inlet size * 10mm X 1.0 outlet size * 6.5 in. long * 1.7 in. diameter * Do not operate this pump without a fuel filter between the tank and the pump. The pre-filter should be between 20-40 microns. A second 10 micron filter should also be used after the pump before the fuel rail.
( 4 )
$98.99
Add extra protection to your vehicle with remote rollover vent valves form Tanks Inc. These rollover vent valves are made of aluminum and are designed with a mesh screen to keep out any debris. In case of an accident, these rollover vent valves will keep fuel from coming out of the vent when turned upside down, or during sudden stops or when you drive over rough terrain. Remote rollover vent valves from Tanks Inc. are just the solution you've been looking for!
( 122 )
$25.99
Tanks Inc. GPA Series fuel pumps are designed to be used in many die-stamped, alloy-coated, and stainless steel gas tanks which have factory-installed reservoir trays. The tray is an absolute necessity for fuel injection in order to prevent fuel starvation when accelerating and cornering. These pumps are available in four different operating ranges in order to supply up to 1,000 hp. An internal wiring harness, supply line, return line, filter sock, and insulator sleeve are included. The heavy 10-gauge, no-warp mounting plate contains fittings for the supply, the return, the vent, and the electrical connector.
( 74 )
$214.99
—
$339.99
Tanks Inc. offers a complete line of gas tank accessories, including fuel filler neck and cap kits. These kits are made of quality metals--steel, stainless steel, and aluminum. They are available with threaded, push-through, or pop-up style caps.
( 67 )
$23.99
—
$94.99
Tanks Inc. fuel pump assembly plates are necessary components when installing your GPA fuel pumps. These hangers come equipped with a wiring harness and 1/4 in. NPT supply and return line.
( 5 )
$104.99
—
$107.99
Tanks Inc. offers a line of replacement filler necks to direct fuel from the gas pump into your tank. They're made from durable galvanized steel, then powdercoated or plated with a protective finish to match the various Tanks Inc. fuel tanks. Numerous styles are available; choose the filler neck designed for your specific car, truck, or van.
( 34 )
$19.99
—
$88.99
Tanks Inc. adjustable fuel pressure regulator and filter kits for electronic fuel injection (EFI) systems include a regulator, inline filter, and fittings. They allow users to dial in precise base fuel pressure, ranging from 35-70 psi, which is critical for optimal engine performance by ensuring a consistent fuel supply to the injectors. The kits also feature a 1:1 boost-referencing capability and a washable 10-micron filter for added performance and engine protection. Key features and details: * Adjustable bypass regulator: Manages fuel pressure to the fuel rails and returns excess fuel to the tank * Fuel pressure increases by 1 psi for every 1 psi of intake manifold boost pressure, which is essential for boosted applications and maintaining a consistent fuel-to-air ratio * Inline fuel filter: Includes a 2 in. diameter, 10-micron stainless steel filter to clean the fuel before it reaches the regulator and injectors * Regulator is built from billet aluminum for durability * Included fittings: Comes with all necessary adapter fittings, such as three -6 AN fittings and a port plug * Includes a fuel pressure gauge with a 1/8 in. NPT port, so you can monitor the pressure * The regulator should be mounted in the fuel line before the fuel rails and after the filter * Compatible with pumps up to 450 lph * Regulator has -10 ORB inlet / outlet fittings with a -6 ORB return * Filter Has a -10 ORB female inlet with a -10 ORB male outlet to connect directly to the regulator * -6 AN male to ORB fittings included * 2 in. diameter by 5 7/8 in. long filter included * Installation wrench included * Regulator must be mounted before the fuel rails when connected to filter
( 2 )
$154.99
Tanks Inc. gas or fuel tank switchover valves are available to replace lost or broken selector valves. Tanks Inc. allows you to run two separate fuel tanks and only draw off of one tank at a time. You would run one fuel line from each tank to the valve, and a line from the valve to your engine. The valves have a 3-port design and work on all 12 V negative ground systems. Switching requires a toggle switch, also available.
( 6 )
$55.99
Tanks Inc. offers a complete line of gas tank accessories, including replacement pop-up aluminum fuel filler caps for use in some of their filler neck kits. The caps are nearly flush when down. For removal, simply push-and-twist to get the center of the cap to pop-up. These pop-up aluminum fuel filler caps from Tanks Inc. look great and perform as you would expect.
Not Yet Reviewed
$74.99
Tanks Inc. PA Series fuel pump modules will assist you in retrofitting an internal fuel pump into your original gas tank. These kits have almost everything (other than the fuel pump) needed to install an internal fuel pump into nearly any tank. PA Series fuel pump modules feature a reservoir tray that eliminates the fuel pump starvation that is common with non-baffled tanks. A properly installed internal fuel pump will eliminate issues common to external fuel pumps such as vapor lock and cavitation. Upgrade your fuel system to an in-tank that's capable of running carburetors or fuel injection with Tanks, Inc. PA Series fuel pump modules. Features include: * You assemble to the depth of your tank and install * All metal components are heavy-gauge, yellow zinc plated steel * Reservoir tray included * 1/4 in. NPT supply line * 1/4 in. NPT return line * 1/4 in. NPT vent opening * In-tank fuel pump wiring harness * Up to 100 psi rating * Threaded heavy-gauge in-tank mounting ring * Heavy-gauge mounting plate * Adjustable-height support arm * Fuel pressure regulators sold separately
( 5 )
$179.99
—
$264.99
Tanks Inc. hose barb fuel vent caps are made from durable, fuel-proof Viton® rubber. They effectively seal fuel vent lines or vacuum ports, preventing fuel tank contamination from dirt, water, and debris. Select the quantity needed.
Not Yet Reviewed
$6.99
Most fuel tanks mount flush against the floor. With Tanks Inc. weld-in fuel pump recesses, you are equipped with an inexpensive, easy solution for installing a PA Series fuel pump or for routing your fuel lines where additional clearance is needed. They are constructed of 18-gauge steel and are 10 in. x 7 in. with a 2 in. flange on all four sides. Simply mark your tank where you want the recesses to go and then trim to fit. The recesses' area is large enough to accept a 5-hole sending unit as well.
( 3 )
$48.99
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks in applications set up to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to, be it a street rod, muscle car, classic truck, or that special ride, Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These are standard stock replacement tanks for carbureted engine applications. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank options.
( 403 )
$289.99
—
$329.99
Make your LS engine swap just a bit easier by incorporating Tanks Inc. LS fuel filter pressure regulators. They feature a fixed pressure set at 58 psi and an internal fuel filter with a nominal micron rating of 5. The bypass-style design has one inlet, one outlet, and one return. Tanks Inc. LS fuel filter regulators are offered individually or as a kit with quick-disconnect fittings.
( 39 )
$77.96
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks and fuel injection-ready tanks. EFI-Ready fuel tank applications are ready to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to—be it a street rod, muscle car, classic truck, or that special ride—Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These EFI-Ready Fuel Tanks are designed for vehicles with engines retrofitted for electronic fuel injection. They have holes pre-drilled for the pump—and the baffling in the tank is suited for electric fuel pumps.
( 74 )
$298.99
Tanks Inc. manufactures fuel tank kits that look like an OE tank when installed. The fuel pump and sending unit are recessed in the tank for easy installation, with no modification needed to your car. In most applications, these tanks are fuel injection ready. They are all manufactured from galvanized steel with a silver powdercoat finish. Tanks Inc. fuel tanks are perfect for your pro-touring, autocross, or road racing ride. NOTE: These are standard stock replacement kits for carbureted engine applications. They include the sending unit and pump in the tank, ready-to-go for installation. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank Kit options.
( 68 )
$294.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
