Availability
Smooth throttle shaft movement and consistent return are a must. Replacing your old, worn throttle cable return springs with Stromberg stainless steel springs will improve throttle snap back--and provide the added throttle return response needed for proper carburetion and pedal function.
( 3 )
$11.50
These Stromberg carburetor spring kits include all of the exterior springs to help you get your carburetor hooked up again. They feature stainless steel construction, except for the idle adjuster spring, and have been manufactured to exacting OEM specifications.
Not Yet Reviewed
$20.50
Keep your Stromberg in tip-top performance with genuine service and restoration parts. Stromberg offers gaskets, jets, power valves, and much more to service and restore your carburetor, including stainless steel choke lever detent plungers and springs. Strombergs run better with the choke plates in, but the rattling levers are a pain. With these choke lock detent kits, you press the pin end of the clever little plunger into your choke lever and presto--no more rattle! Stromberg service/restoration parts are designed to offer the best quality available and are stamped with the "S" logo to ensure that they're the real deal. Because the people at Stromberg pay attention to detail, your rebuild is hassle-free with parts that fit properly. Stromberg service/restoration parts are the right parts for your 97.
Not Yet Reviewed
$6.75
—
$8.50
Stromberg carburetor rebuild kits are the real deal. Designed and manufactured to the highest quality, these premium service kits offer great value and authentic service parts for your Stromberg carburetor rebuild. These carburetor kits are available for your Stromberg 97, 48, 40, and 81 to keep them operating at peak performance. Kits include: * Full gasket kit * No-stick S-jet inlet valve * Accelerator pump check valve * 2 idle mixture screws and springs * Full accelerator pump kit * Installation sheet * Float gauge
( 16 )
$52.95
—
$58.25
Stromberg 81 carburetors are the perfect partner for your early Ford 4-banger or V8-60 engine. Here are the product highlights: * Super-accurate pressure die-castings from new dies, CNC-machined for a blue-print parts fit * New base casting with correct 1.0625 in. throttle plates. Parkerized and black lacquered just like they used to be * Two slip-in aluminum inserts replicate the original 0.81 in. venturi; correct booster signal with minimum turbulence * O-ring sealed sleeve pressed into the accelerator pump well, for the correct 81 pump * Reinforced air horn casting with extra material around the float bowl lid to eliminate warping and leaks * Tested and jetted correctly for this new model: 0.036 in. main jets and a No. 71 power valve * 116 cfm airflow capacity (independently verified) measured at 1.5 in. Hg (same as they measure 4-bbl carbs) * New brass float, made in USA on original Stromberg dies * Specially developed no-stick S-Jet inlet valve * New, correct-size 81 base gasket * Stainless steel linkage throughout. Stainless springs, accelerator pump rod, throttle linkage, choke plate, lever and more * Beautiful investment cast stainless steel throttle and accelerator pump levers * Correct pale chromate zinc treatment using the original Ford Service Bulletin process * Original-style riveted throttle and choke shafts * Extensive dyno and road tests—and great feedback! * Note: Original hand throttle parts are not included * Remember, like any carburetor, the new Stromberg 81 needs proper installation and tuning for optimum performance. Every 81 comes with full installation instructions
( 1 )
$555.00
Upgrade your throttle cable with the coolest end clip around! With stainless steel body and black painted clip, the Stromberg Rocket Clip works with all popular throttle cable kits—but best of all, it's an easy way to convert your 97 carb from rod to cable choke. Just add a Stromberg bracket (9552K-B) for the cable outer sleeve. Stromberg recommends using a push/pull wire type kit, which won't need a return spring. Either way, the knurled set screw will grip the wire for reliable operation. For Stromberg, it's all about making their carburetors easier to use!
( 5 )
$17.50
The Stromberg 97 carburetor base plates feature a new 97 base (throttle body) with specially-designed brass fittings to help provide ported vacuum advance for your distributor. These carb base plates come complete with throttle shaft, bushes and plate, new kicker and choke lever, idle mixture screws, and springs and gaskets. Genuine Stromberg—the choice for generations of hot rodders!
( 4 )
$170.00
Connect your '97s for performance and appearance with Stromberg TwoStep linkage kits. Their 2x2 throttle linkages couple both your carburetors with clean, traditional looks and maximum leverage! Stromberg TwoStep direct linkage utilizes long die-cast zinc SuperLink lever arms with swivels while all other parts are crafted from long-lasting, strong stainless steel. These intake specific kits are delivered preassembled and install in just two simple steps. You don't need extended throttle shafts and two new "snapback" throttle return springs are included. Complete your Stromberg 97 set-up with a clean, nostalgic look that's competitively priced--TwoStep 2x2 throttle linkages.
( 9 )
$52.50
Stromberg throttle cable brackets position the cable for optimum, bind-free 'pulls' on their TwoStep linkages. These stainless steel brackets are compatible with most readily available hot rod cable throttle kits—and include two Stromberg carburetor-to-manifold gaskets. They feature a fixing hole for the small extension bracket supplied with many auto-transmission kickdown cable kits, plus a separate side arm to provide a mount for traditional throttle return springs. Mount your hot rod cable throttle kit with Stromberg throttle cable brackets.
( 5 )
$49.95
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg service parts. Their accelerator pump kits are made to fit for a no-hassle repair. These kits include springs, retainers, washers, felt gaskets, and cotter pins. They also have a kit for the Stromberg 81 with a correct 10-finger brass spring washer beneath a leather seal. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
Not Yet Reviewed
$23.25
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg service parts. Their brass idle adjusting screws and springs are given a gold iridited finish and precision-made for a no-hassle rebuild. The float is supplied with new float pin. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
( 1 )
$14.75
Stromberg Carburetors accelerator pump rods are designed to fit your Stromberg carburetor. They are offered for a choice of models. You can count on Stromberg for the service parts that you need to keep your carb working at its best.
( 1 )
$22.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
